Installation Material

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 305817

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 372143

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 804823

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 804785

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 902535

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 729157

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 568653

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 780575

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 meters
Lieske Part No.: 180449

The heat shrink tubing type SR3 is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 1013523

The heat shrink tubing type SR3 is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 256952

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 960711

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 1578852

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 810389

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 549257

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 960682

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 175981

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 960662

Die Warmschrumpfschläuche vom Typ SRUM sind mittelwandig, mit thermoplastischem Kleber mit einer Schrumpfrate 4:1. Typische Anwendungsgebiete sind der Druck- und Feuchtigkeitsschutz von Kabeln sowie die Verwendung in Schrumpfmuffen und Schrumpfendverschlu¨ssen.
Sales unit: 150 meters
Lieske Part No.: 490877

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 100 meters
Lieske Part No.: 1316307

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 50 meters
Lieske Part No.: 734910

Universally usable for marking plastic cables in the connection area. Black shrink tubing with white print, 1 set = 1 piece each of L1, L2, L3, N.
Lieske Part No.: 926857

Universally usable for marking plastic cables in the connection area. Black shrink tubing with white print, 1 set = 1 piece each of L1, L2, L3, N.
Lieske Part No.: 913659

Universally usable for marking plastic cables in the connection area. Black shrink tubing with white print, 1 set = 1 piece each of L1, L2, L3, N.
Lieske Part No.: 492772

The heat shrink tubing type SRC1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 235978

The heat shrink tubing type SRC1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 783925

The heat shrink tubing type SRC1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 794822

The heat shrink tubing type SRC1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 623895

The heat shrink tubing type SRC1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 219869

Universell verwendbar zum Verbinden von armierten (bewehrten) Kunststoffkabeln mit Isolierungen aus PVC, PE und VPE (z. B. N(A)YFGY, N(A)YRGY). Geeignet für Pressverbinder auf Aluminium- und Kupferkabeln.
Lieske Part No.: 494986

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). Suitable for compression connectors on aluminum and copper cables.
Sales unit: 10 pieces
Lieske Part No.: 757464

Universally applicable for transition from cables with paper insulation to cables with insulation made of PVC, PE and XLPE, e.g. N(A)KBA to N(A)YY. Suitable for compression connectors on aluminum and copper cables.
Lieske Part No.: 1316172

Universally applicable for connecting plastic cables to electrical equipment, for cables with PE and XLPE insulation and PVC and PE cable sheaths. Suitable for compression cable lugs on aluminum and copper cables.
Lieske Part No.: 960520

Universally applicable for connecting plastic cables to electrical equipment, for cables with PE and XLPE insulation and PVC and PE cable sheaths. Suitable for compression cable lugs on aluminum and copper cables.
Lieske Part No.: 960585

Universally applicable for connecting plastic cables to electrical equipment, for cables with insulation made of PE, XLPE, PVC and cable sheaths made of PVC and PE. Suitable for compression cable lugs on aluminum and copper cables.
Lieske Part No.: 1578890

SEEV hybrid terminations for indoor applications are suitable for armored 3-core plastic cables (PVC, PE, XLPE, EPR) without an outer conductive layer. Suitable for compression or screw cable lugs.
Lieske Part No.: 614598

Universell verwendbar zum Verbinden von Vierleiterkabel mit Isolierungen aus PVC, PE und VPE (z.B.: N(A)YY, N(A)2XY, TT). Geeignet für Pressverbinder auf Aluminium- und Kupferkabeln.
Lieske Part No.: 490864

Universally applicable for connecting four-core cables with insulation made of PVC, PE and XLPE (e.g. N(A)YY, N(A)2XY, TT). Suitable for compression connectors on aluminum and copper cables.
Lieske Part No.: 960659

Universally applicable for connecting cables with EPR insulation (e.g. A07RN-F, H07RN-F). Suitable for press connectors.
Lieske Part No.: 713396

Universally applicable for connecting cables with EPR insulation (e.g. A07RN-F, H07RN-F). Suitable for press connectors.
Lieske Part No.: 940782

Universally usable for connecting control and signal cables. With heat shrink crimp connectors on copper conductors.
Lieske Part No.: 384452

For connecting safety cables of types NHXH and NHXCH wherever these are required, e.g. in power plants, chemical plants, public buildings, airports, tunnels, offshore facilities, fire alarm systems, stairwells, elevator shafts. Suitable for press connectors.
Lieske Part No.: 938117

For connecting safety cables of types NHXH and NHXCH wherever these are required, e.g. in power plants, chemical plants, public buildings, airports, tunnels, offshore facilities, fire alarm systems, stairwells, elevator shafts. Suitable for press connectors.
Lieske Part No.: 706130

For connecting safety cables of types NHXH and NHXCH wherever these are required, e.g. in power plants, chemical plants, public buildings, airports, tunnels, offshore facilities, fire alarm systems, stairwells, elevator shafts. Suitable for press connectors.
Lieske Part No.: 144771

For connecting safety cables of types NHXH and NHXCH wherever these are required, e.g. in power plants, chemical plants, public buildings, airports, tunnels, offshore facilities, fire alarm systems, stairwells, elevator shafts. Suitable for press connectors.
Lieske Part No.: 506985

For connecting safety cables of types NHXH and NHXCH wherever these are required, e.g. in power plants, chemical plants, public buildings, airports, tunnels, offshore facilities, fire alarm systems, stairwells, elevator shafts. Suitable for press connectors.
Lieske Part No.: 764724

Warning tape with monolingual print: Attention Cable
Lieske Part No.: 833181

Warning tape with monolingual print: Attention telecommunications cables
Sales unit: 10 pieces
Lieske Part No.: 388401

Warning tape with monolingual print: Attention high voltage cable
Sales unit: 10 pieces
Lieske Part No.: 436274

For the protection and mechanical connection of cable connector systems in the telecommunications sector.
Lieske Part No.: 442126