Installation Material

The RED cable ties made of pure polyamide 6.6 are universally applicable and an excellent solution for bundling and fastening cables and lines or for securing other products. The silicone and halogen-free RED cable ties, in natural and black, are resistant to diluted organic acids, oils, petrol, salt water, solvents and greases. The RED cable ties are installed manually or with a processing tool.
Technical data
. Fire protection class: UL 94 V2
. Specification: UL, Lloyd's, DNV-GL
Sales unit: 100 pieces
Lieske Part No.: 2022671

The RED cable ties made of pure polyamide 6.6 are universally applicable and an excellent solution for bundling and fastening cables and lines or for securing other products. The silicone and halogen-free RED cable ties, in natural and black, are resistant to diluted organic acids, oils, petrol, salt water, solvents and greases. The RED cable ties are installed manually or with a processing tool.
Technical data
. Fire protection class: UL 94 V2
. Specification: UL, Lloyd's, DNV-GL
Sales unit: 100 pieces
Lieske Part No.: 2022672

The RED cable ties made of pure polyamide 6.6 are universally applicable and an excellent solution for bundling and fastening cables and lines or for securing other products. The silicone and halogen-free RED cable ties, in natural and black, are resistant to diluted organic acids, oils, petrol, salt water, solvents and greases. The RED cable ties are installed manually or with a processing tool.
Technical data
. Fire protection class: UL 94 V2
. Specification: UL, Lloyd's, DNV-GL
Sales unit: 100 pieces
Lieske Part No.: 2022673

The impact anchor is made of special electrical steel with a high carbon content. It is also highly hard, extremely break-resistant and ensures absolute safety during processing. The impact anchor must be inserted up to the collar in a setting iron with a 4 mm opening. Once correctly inserted, it remains in the setting iron and can be driven in with a hammer or a sledgehammer. The product can be used for quick installation, together with assembly tapes, of pipes on the raw concrete - applied before the screed. It is therefore a very cost-effective alternative to shooting.
Sales unit: 200 pieces
Lieske Part No.: 2022255

The impact anchor is made of special electrical steel with a high carbon content. It is also highly hard, extremely break-resistant and ensures absolute safety during processing. The impact anchor must be inserted up to the collar in a setting iron with a 4 mm opening. Once correctly inserted, it remains in the setting iron and can be driven in with a hammer or a sledgehammer. The product can be used for quick installation, together with assembly tapes, of pipes on the raw concrete - applied before the screed. It is therefore a very cost-effective alternative to shooting.
Sales unit: 200 pieces
Lieske Part No.: 2022271

Sales unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 2022474

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 200 pieces
Lieske Part No.: 2022476

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 100 pieces
Lieske Part No.: 2022477

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 200 pieces
Lieske Part No.: 2022478

The plasterboard impact anchor is suitable for mounting all common plasterboards. No special tools are required for this anchor, simply hammer it in horizontally. When screwed in, the anchor expands and provides a secure hold. Screws are not included. The material is steel.
Sales unit: 100 pieces
Lieske Part No.: 2022481

The plasterboard dowel is suitable for mounting all common plasterboards. The dowel can be easily screwed in using a screwdriver without pre-drilling. The thread is self-tapping. The dowel is suitable for screws with a diameter of 4-5 mm. Screws are not included.
Sales unit: 100 pieces
Lieske Part No.: 2022482

The practical RED BOXX Mini impact/nail/screw dowel is very versatile. The included dividers can be used individually and are flush with the lid.
In this version, you get the RED BOXX Mini with 50 each of RED plasterboard dowels BFM GKSD L and BFM GKSD as well as the RED impact/nail/screw dowel BFM SNSD.
With the RED BOXX Mini, also available as an empty version, you can also practically store your own small materials and pre-sort them perfectly for you. The transparent lid lets you see at a glance what you are storing in the RED BOXX Mini.
Another advantage of the RED BOXX Mini is that you can cleverly stack them on top of each other and connect them to each other using the intelligent click system. This turns a RED BOXX Mini into a whole system.
Contents
: 50 plasterboard impact dowels BFM GKSD L 12x30 mm
. 50 pieces of plasterboard dowels BFM GKSD 12.5x31 mm
. 50 pieces of impact/nail/screw dowels BFM SNSD 6x40 mm
Lieske Part No.: 2022484

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 300 pieces
Lieske Part No.: 2022259

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 250 pieces
Lieske Part No.: 2022260

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 150 pieces
Lieske Part No.: 2022261

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 100 pieces
Lieske Part No.: 2022262

The grey double plug hook is suitable for attaching one or two cables, each with a diameter of 4-12 mm. It can be inserted into a 6 mm drill hole without tools and is therefore used for quick and easy attachment by hand, without screwing or hammering. The double plug hook can be used to attach several diameters at once. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The double plug hook is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of performance properties and is UV-resistant.
Sales unit: 200 pieces
Lieske Part No.: 2022270

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022274

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022275

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022276

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022277

The impact/nail/screw dowel is an absolute all-rounder for all surfaces and can also be used for concrete, hollow blocks, plasterboard and aerated concrete. The pre-assembled screw saves time during installation. The galvanized nail has an impact-protected Phillips slot. The dowel is made of nylon with a flat collar and is therefore tear-resistant, heat- and cold-resistant and age-resistant.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 600-700 N/mm2
Sales unit: 200 pieces
Lieske Part No.: 2022483

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 50 pieces
Lieske Part No.: 2022251

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 50 pieces
Lieske Part No.: 2022252

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 50 pieces
Lieske Part No.: 2022253

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 30 pieces
Lieske Part No.: 2022254

The plug-in loop is perfect for attaching cables. It can be inserted by hand without tools and is therefore quick and easy to use. It is suitable for stone, concrete, hollow brick, sand-lime brick and aerated concrete. The plastic is halogen and silicone free. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The plug-in loop is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of its performance properties and is UV-resistant.
Sales unit: 200 pieces
Lieske Part No.: 2022256

The plug-in loop is perfect for attaching cables. It can be inserted by hand without tools and is therefore quick and easy to use. It is suitable for stone, concrete, hollow brick, sand-lime brick and aerated concrete. The plastic is halogen and silicone free. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The plug-in loop is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of its performance properties and is UV-resistant.
Sales unit: 100 pieces
Lieske Part No.: 2022257

The plug-in loop is perfect for attaching cables. It can be inserted by hand without tools and is therefore quick and easy to use. It is suitable for stone, concrete, hollow brick, sand-lime brick and aerated concrete. The plastic is halogen and silicone free. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The plug-in loop is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of its performance properties and is UV-resistant.
Sales unit: 50 pieces
Lieske Part No.: 2022258

The nail clamp is ideal for laying cables easily. It can be used flexibly for cables with different diameters. The hardened steel nail ensures that cables are securely attached to concrete and wood. Silicone and halogen free.
Sales unit: 100 pieces
Lieske Part No.: 2022263

The nail clamp is ideal for laying cables easily. It can be used flexibly for cables with different diameters. The hardened steel nail ensures that cables are securely attached to concrete and wood. Silicone and halogen free.
Sales unit: 100 pieces
Lieske Part No.: 2022264

The nail clamp is ideal for laying cables easily. It can be used flexibly for cables with different diameters. The hardened steel nail ensures that cables are securely attached to concrete and wood. Silicone and halogen free.
Sales unit: 100 pieces
Lieske Part No.: 2022265

The nail clamp is ideal for laying cables easily. It can be used flexibly for cables with different diameters. The hardened steel nail ensures that cables are securely attached to concrete and wood. Silicone and halogen free.
Sales unit: 100 pieces
Lieske Part No.: 2022266

Natural plastic discs made of polyethylene with a pre-mounted nail made of hardened steel. Several cables can be attached in one operation. Cables can be quickly attached in wall slots or on the masonry before plastering. Can be used in narrow or wide wall slots thanks to the shape.
Sales unit: 200 pieces
Lieske Part No.: 2022267

Natural plastic discs made of polyethylene with a pre-mounted nail made of hardened steel. Several cables can be attached in one operation. Cables can be quickly attached in wall slots or on the masonry before plastering. Can be used in narrow or wide wall slots thanks to the shape.
Sales unit: 150 pieces
Lieske Part No.: 2022268

Natural plastic discs made of polyethylene with a pre-mounted nail made of hardened steel. Several cables can be attached in one operation. Cables can be quickly attached in wall slots or on the masonry before plastering. Can be used in narrow or wide wall slots thanks to the shape.
Sales unit: 100 pieces
Lieske Part No.: 2022269

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 100 pieces
Lieske Part No.: 2022272

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 100 pieces
Lieske Part No.: 2022273

The metal mounting tape made of galvanized steel is the ideal companion for the impact anchor. It has a length of 10 m in the packaging unit and is used to attach pipes to concrete.
Lieske Part No.: 2022278

The fabric tape is the ideal companion for the impact anchor. It has a length of 15 m in the packaging unit. It is ideal for attaching pipes and cables to concrete. It is made from high-quality polypropylene and is therefore UV-stabilized. Due to its tear resistance, the fabric tape can be used in many different ways.
Lieske Part No.: 2022280

With the practical RED Clip, you can quickly and tool-free fix cables in wall pipe slots up to 55 mm. The RED Clip has a high clamping force and thanks to its color neutrality, the clip is not visible in the plaster even after processing. In addition, no cables are damaged and it is easy to install thanks to the eyelet for the finger.
Sales unit: 50 pieces
Lieske Part No.: 2022314

The practical RED BOXX Mini nail clamps are versatile. The dividers supplied can be used individually and are flush with the lid.
In this version, you get the RED BOXX Mini with 300 each of the RED nail clamps type BFM NSMN 4-7/18 gray and 7-12/35 gray.
With the RED BOXX Mini, also available as an empty version, you can also conveniently store your own small material requirements and pre-sort them perfectly for you.
The transparent lid lets you see at a glance what contents you are storing in the RED BOXX Mini.
Another advantage of the RED BOXX Mini is that they can be cleverly stacked on top of each other and connected to each other using the intelligent click system. This turns a RED BOXX Mini into a complete system.
The pre-assembled galvanized nail of the nail clamp enables quick fastening and reduces assembly time. The small space required for fastening makes assembly easier in confined spaces.
Contents
300 pieces nail clamp BFM NSMN 4-7/18
300 pieces nail clamp BFM NSMN 7-12/35
Lieske Part No.: 2022443

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022457

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022458

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022459

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022461

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022462

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022463

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022464

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022465