Installation Material

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022466

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 100 pieces
Lieske Part No.: 2022752

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 50 pieces
Lieske Part No.: 2022753

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 200 pieces
Lieske Part No.: 2022754

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 100 pieces
Lieske Part No.: 2022755

The RED metal cable holders with functional integrity from the BFM-MSH series are available for 15 or 30 NYM 3x1.5mm2 cables. The cable holders are designed for quick and easy installation of several cables on the ceiling or wall. The diameter of the mounting hole is 6 mm.
Due to the high stability of the shape, the cable holder is ideal for use in suspended ceilings, even when exposed to heat.
Lieske Part No.: 2023187

The RED metal cable holders with functional integrity from the BFM-MSH series are available for 15 or 30 NYM 3x1.5mm2 cables. The cable holders are designed for quick and easy installation of several cables on the ceiling or wall. The diameter of the mounting hole is 6 mm.
Due to the high stability of the shape, the cable holder is ideal for use in suspended ceilings, even when exposed to heat.
Lieske Part No.: 2023188

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023189

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023190

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023191

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023192

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023193

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023194

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023195

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023196

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023197

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023198

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023199

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023200

The metal mounting tape is the ideal companion to the impact anchor. It is used to attach pipes to concrete, and sometimes also cables. The high-quality plastic coating protects both the tape and the pipes to be fixed from damage. The metal versions are galvanized steel and can therefore withstand high mechanical loads. The mounting tapes generally have a length of 10 m in the packaging unit.
Lieske Part No.: 2135541

The metal mounting tape is the ideal companion to the impact anchor. It is used to attach pipes to concrete, and sometimes also cables. The high-quality plastic coating protects both the tape and the pipes to be fixed from damage. The metal versions are galvanized steel and can therefore withstand high mechanical loads. The mounting tapes generally have a length of 10 m in the packaging unit.
Lieske Part No.: 681983

The 30 meter long knotted chain with a thickness of 2.5x35 mm for use in accordance with DIN 5686. It is housed in a sealable and reusable bucket with a capacity of 5 liters. The steel chain has a breaking load of 440 N and is galvanized/electrolytically galvanized.
Lieske Part No.: 1062765

Der Sammelhalter ist geeignet für die schnelle Verlegung von Leitungen in Zwischendecken an Wand oder Decke, mittels Betonnagler oder Schlagmontage, ohne weitere Hilfsmittel.
Individuelle Installationsmöglichkeiten ermöglichen hohe Flexibilität und maximale Zeiteinsparung durch neue Geometrie des Befestigungssatelliten.

. Montagemöglichkeit 1:
Konventionelle Befestigung mit Schlagdübel, Schraube (empfohlen wird eine Flachkopfschraube 4,5x50) oder Steckdübel
. Montagemöglichkeit 2:
Direktbefestigung mit Betonnagler u.a. der Marken Bosch, Fischer und Spit Verkaufseinheit: 100 ST.
Lieske Part No.: 877396

Der Sammelhalter ist geeignet für die schnelle Verlegung von Leitungen in Zwischendecken an Wand oder Decke, mittels Betonnagler oder Schlagmontage, ohne weitere Hilfsmittel.
Individuelle Installationsmöglichkeiten ermöglichen hohe Flexibilität und maximale Zeiteinsparung durch neue Geometrie des Befestigungssatelliten.

. Montagemöglichkeit 1:
Konventionelle Befestigung mit Schlagdübel, Schraube (empfohlen wird eine Flachkopfschraube 4,5x50) oder Steckdübel
. Montagemöglichkeit 2:
Direktbefestigung mit Betonnagler u.a. der Marken Bosch, Fischer und Spit Verkaufseinheit: 100 ST.
Lieske Part No.: 877350

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022225

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022226

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022227

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022228

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022229

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022230

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022231

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022928

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022929

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022930

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022931

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022932

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022933

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022934

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022935

Shelf for shrink tubing boxes
The shrink tubing shelf holds up to 6 RED® shrink tubing mini boxes and brings order to the workshop or assembly & service vehicle. The scissors supplied and attached by a chain allow you to cut off the required section of shrink tubing at any time.
Dimensions: 18.3 x 31.6 x 26.2 mm
Color: red
This package
contains the following shrink tubing mini boxes.
DEHA No. 5116532, WSB 3:1 Box 3.0-1.0
DEHA No. 5116533, WSB 3:1 Box 6.0-2.0
DEHA No. 5116534, WSB 3:1 Box 9.0-3.0 DEHA No.
5116535, WSB 3:1 Box 12.0-4.0
DEHA No. 5116536, WSB 3:1 Box 18.0-6.0
DEHA No. 5116537, WSB 3:1 Box 24.0-8.0
Lieske Part No.: 2072243

Sales unit: 1 ST.
Lieske Part No.: 2021999

Sales unit: 1 ST.
Lieske Part No.: 2022010

Quantity: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 603915

SZ Kabelverschraubung Polymaid, Größe: M12x1,5, für Kabel ø 3-6,5 mm
Lieske Part No.: 539381

The super-fast solution for fastening cables to the enclosure profile or mounting system parts. Simply clip into the round system punchings.
Packs of: 100 pc(s).
EAN: 4028177029002
Customs tariff number: 39269097
eCl@ss 5.1: 27189223
eCl@ss 7.0: 27140702
ETIM 6.0: EC000046

Dimensions: Length: 150 mm
Weight/pack: 0.1 kg
Lieske Part No.: 210968

Sales unit: 1 PC.
Lieske Part No.: 1101899

VX insulation cap, for screw head
Lieske Part No.: 1441672

Applications: For retrospective insertion into the Maxi-PLS busbar section
Packs of: 15 pc(s).
EAN: 4028177238787
Customs tariff number: 74199990
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC000096

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Thread: M6
Weight/pack: 0.14 kg
Lieske Part No.: 837012

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444386
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M6
Length: 35 mm
Weight/pack: 0.06 kg
Lieske Part No.: 471918

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444379
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M8
Length: 35 mm
Weight/pack: 0.11 kg
Lieske Part No.: 506282