Installation Material

Reducing bridge, from M8 to M6, silver
Sales unit: 5 pieces
Lieske Part No.: 1957243

Reducing bridge, from M10 to M6, silver
Sales unit: 5 pieces
Lieske Part No.: 1957244

Empty housing, M6, grey
Sales unit: 25 pieces
Lieske Part No.: 1957245

Empty housing, M8, grey
Sales unit: 20 pieces
Lieske Part No.: 1957246

Empty housing, M10, grey
Sales unit: 20 pieces
Lieske Part No.: 1957247

Partition, 2 mm thick, 102.3 mm wide, grey
Sales unit: 25 pieces
Lieske Part No.: 1321679

Partition, 2 mm thick, 110.3 mm wide, grey
Sales unit: 25 pieces
Lieske Part No.: 1237296

Partition, 2 mm thick, 157 mm wide, grey
Sales unit: 25 pieces
Lieske Part No.: 1566429

Partition with cross connector track, 2 mm thick, 102.3 mm wide, grey
Sales unit: 25 pieces
Lieske Part No.: 1237606

Partition with cross connector track, 2 mm thick, 110.3 mm wide, grey
Sales unit: 25 pieces
Lieske Part No.: 1237309

Partition with cross connector track, 2 mm thick, 157 mm wide, grey
Sales unit: 25 pieces
Lieske Part No.: 1237676

Cover profile, 1 m long, transparent
Lieske Part No.: 947690

Cover profile, 1 m long, transparent
Sales unit: 5 pieces
Lieske Part No.: 1286867

Clip, secures cover profile against slipping
Sales unit: 25 pieces
Lieske Part No.: 947699

Connection terminal set, L-BOXX® Mini, series 221, 2273, 773, 224, 243
Sales unit: 10 pieces
Lieske Part No.: 1130127

Locking latch for flying connections for tool operation
Sales unit: 50 pieces
Lieske Part No.: 907407

Strain relief housing 2-pole with locking clamp for 1 cable 3.8 ¿ 8.2 mm 30 mm
Sales unit: 50 pieces
Lieske Part No.: 908240

Strain relief housing 3-pole with locking clamp for 1 cable 4.5 ¿ 10.0 mm 37 mm
Sales unit: 50 pieces
Lieske Part No.: 907465

Strain relief housing 5-pin with locking clamp for 1 cable 6.5 ¿ 10 .5 mm 45 mm
Sales unit: 50 pieces
Lieske Part No.: 949630

Flat cable end piece 3-pin plastic
Sales unit: 25 pieces
Lieske Part No.: 898397

Flat cable end piece plastic for flat cable 5 x 2.5 mm²
Sales unit: 25 pieces
Lieske Part No.: 907454

Flat cable end piece, for flat cable 5 x 2.5 mm² + 2 x 1.5 mm², plastic, transparent
Sales unit: 25 pieces
Lieske Part No.: 907439

Fastening clamp for screwing on plastic
Sales unit: 100 pieces
Lieske Part No.: 904391

WALTHER intermediate socket M20
made of nickel-plated brass
hexagon
Sales unit: 5 pieces
Lieske Part No.: 1918254

WALTHER intermediate socket M25
made of nickel-plated brass
hexagon
Lieske Part No.: 1918255

Sleeve housing for single locking system, cable entry straight version: 24-pin, M25 x 1, H. 76 Type: 717 667

Please in 10 units Order
Lieske Part No.: 433292

Sleeve housing for double locking latch, cable entry sideways version: 24-pin, M25 x 1, H. 76 Type: 717 668

Lieske Part No.: 433295

WALTHER adapter
brass adapter nickel-plated
with external thread metric
and internal thread PG from M32 to PG29
Lieske Part No.: 418471

WALTHER PE screw M4
for series B, BB, DD, MO, BV, D40 and D64
Sales unit: 10 pieces
Lieske Part No.: 2013460

WALTHER cable grommet
with cable diameter 11-12mm
from 10mm diameter
with strain relief through cable ties (max. 8mm wide)
Sales unit: 10 pieces
Lieske Part No.: 1581102

The fastening screw ensures secure contact between the conductor and the busbar.
Sales unit: 100 pieces
Lieske Part No.: 980225

Plug-in card holder for industrial applications to accommodate multiple 19' cards.
Lieske Part No.: 944742

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 497578

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 727583

Mounting rails, steel
Type: Perforated
Standard length: 2 meters

Type: TS15X5/LL2M/ST/ZN
Quantity: 1 MTR
Sales unit: 2 meters
Lieske Part No.: 273218

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 166463

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 292488

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 809025

Electronics housing in profile form for snapping onto a mounting rail.
Sales unit: 20 pieces
Lieske Part No.: 897818

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 20 pieces
Lieske Part No.: 817097

Electronics housing in profile form for snapping onto a mounting rail.
Sales unit: 20 pieces
Lieske Part No.: 869108

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 646543

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 647557

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 262546

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 100 pieces
Lieske Part No.: 658312

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 100 pieces
Lieske Part No.: 1581122

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 288190

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 250674

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 500 pieces
Lieske Part No.: 1203566

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 897711