Installation Material

The exterior of a lock washer resembles an open ring with three contact areas, which ensures high resistance to vibrations. The lock washer enables different components to be secured.
Sales unit: 100 pieces
Lieske Part No.: 622059

Holder for device markers for device identification. The holders can be attached using screws, glue or cable ties.
Lieske Part No.: 863982

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 468925

Socket for measurements on bridged terminal groups.
Sales unit: 50 pieces
Lieske Part No.: 969117

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 858532

Mounting feet are screwed to the wall, for example, in order to mount the support rails on them.
Sales unit: 10 pieces
Lieske Part No.: 240446

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 10 pieces
Lieske Part No.: 897684

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 770850

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 884391

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 801279

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 626371

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 801297

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 801302

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 200 pieces
Lieske Part No.: 433639

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 250 pieces
Lieske Part No.: 896143

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 735173

Mounting feet are screwed to the wall, for example, in order to mount the support rails on them.
Sales unit: 10 pieces
Lieske Part No.: 103349

Cover for terminals to protect against contact, dust and moisture.
Sales unit: 50 pieces
Lieske Part No.: 760484

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 330548

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 10 pieces
Lieske Part No.: 815634

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 505946

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 5 pieces
Lieske Part No.: 804445

PKH holder for receiving the Einzelmarkierer PK 2 / 4th
Length: 110 mm

Type: WPKH110HALTESTREIFEN
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 426008

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 20 pieces
Lieske Part No.: 991563

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 20 pieces
Lieske Part No.: 621115

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 217384

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 241784

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 336143

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 250170

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 623931

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 892089

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 872221

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 954355

Terminal block for isolating circuits during testing or measurements.
Lieske Part No.: 426518

Terminal block for isolating circuits during testing or measurements.
Sales unit: 5 pieces
Lieske Part No.: 220601

The end bracket guarantees a permanently secure fit on the mounting rail and prevents slipping. The end bracket has marking options for group markers and the option of accommodating test plugs.
Sales unit: 50 pieces
Lieske Part No.: 368822

The end bracket guarantees a permanently secure fit on the mounting rail and prevents slipping. The end bracket has marking options for group markers and the option of accommodating test plugs.
Sales unit: 50 pieces
Lieske Part No.: 250628

D-Sicherungseinsatz für die Unterbrechung des Stromkreises im Fehlerfall.
Sales unit: 25 pieces
Lieske Part No.: 493590

D-fuse link for interrupting the circuit in the event of a fault.
Sales unit: 25 pieces
Lieske Part No.: 1316738

Terminal block with multiple levels for connecting or linking conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Space-saving design.
Sales unit: 25 pieces
Lieske Part No.: 791113

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 20 pieces
Lieske Part No.: 783065

Terminal block for connecting or linking protective conductors to the mounting base (earth). Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 50 pieces
Lieske Part No.: 286054

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 396949

Halogen-free, low-emission markers for lines and cables. Fastened with cable ties.
Sales unit: 200 pieces
Lieske Part No.: 201413

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 100 pieces
Lieske Part No.: 712083

Socket for measurements on bridged terminal groups.
Sales unit: 50 pieces
Lieske Part No.: 1425149

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 25 pieces
Lieske Part No.: 859081

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 25 pieces
Lieske Part No.: 797327

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 25 pieces
Lieske Part No.: 797334

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 25 pieces
Lieske Part No.: 293787