Installation Material

Nail clamp TC10-14 Nail: (2.0/30/17mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 454230

Nail clamp TC10-14 (2.0/45/32) WHITE (100 pieces/pack). Safety pins bend these instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible - each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1857832

Pin clamp TC 14-20-WHITE
Sales unit: 100 pieces
Lieske Part No.: 583606

Nail clamp TC14-20 Nail: (2.0/35/18mm) white
Sales unit: 100 pieces
Lieske Part No.: 733334

Nail clamp TC14-20 Nail: (2.0/35/18mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 599620

Nail clamp TC14-20 (2.0/45/28mm) light green. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Lieske Part No.: 1770368

Nail clamp TC18-22 Nail: (2.5/45/25mm) white
Sales unit: 50 pieces
Lieske Part No.: 725935

Nail clamp TC18-22 nail: (2.5/45/25mm) grey
Sales unit: 50 pieces
Lieske Part No.: 172301

Nail clamp TC22-26 Nail: (2.5/45/21mm) white
Sales unit: 50 pieces
Lieske Part No.: 674342

Nail clamp TC22-26 Nail: (2.5/45/21mm) grey
Sales unit: 50 pieces
Lieske Part No.: 240512

NAIL CLAMP TC22-26 (2.5/55/31MM) LIGHT GRAY. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible; each clamp type covers several cable cross-sections. Pins in various thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in various designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 50 pieces
Lieske Part No.: 1858998

Nail clamp for flat cable TC3X5 (1.2/20/15) natural
Sales unit: 100 pieces
Lieske Part No.: 487998

Sales unit: 100 pieces
Lieske Part No.: 894460

Sales unit: 100 pieces
Lieske Part No.: 765797

Sales unit: 100 pieces
Lieske Part No.: 540490

Cable clamp without screw TK10-14 (14/27/13) white. Cable clamps for laying round cables. For installing cables or cable ducts. Mounting on wood is done with wood screws. For mounting on concrete, stone, plasterboard, etc., friction dowels TP or screw nail dowels TPS are required. Flexible, each size covers different cable cross-sections, high impact strength and resistance to extreme heat and cold as well as acid exposure, wide range, fastening with screw nail dowel TPS or wood screw. Impact-resistant PP (polypropylene) Temperature range: -40 to +80 °C.
Sales unit: 100 pieces
Lieske Part No.: 323103

Installation tape/perforated tape steel tape-PELD coated TUB-14x2.5 white ring 10M. Applications: pendulum mounting, anchoring etc. for electrical, building, heating, water and sanitary installations. Advantages: wide range, suitable for light and heavy loads, suitable for almost all installation cases under all environmental conditions, corrosion-resistant, easy to cut and shape.
Lieske Part No.: 1861519

Installation tape / perforated tape ZN galvanized steel tape TGB-12x0.7MM (ring with 10M). Applications: pendulum mounting, anchoring, etc. in electrical, construction, heating, water and sanitary installations. Advantages: wide range, suitable for light and heavy loads, suitable for almost all installation cases under all environmental conditions, corrosion-resistant, easy to cut and shape.
Lieske Part No.: 1861108

Installation tape / perforated tape ZN galvanized steel tape TGB-20x1.0MM (ring with 10M). Applications: pendulum mounting, anchoring, etc. for electrical, construction, heating, water and sanitary installations. Advantages: wide range, suitable for light and heavy loads, suitable for almost all installation cases under all environmental conditions, corrosion-resistant, easy to cut and shape.
Lieske Part No.: 1861508

Installation tape / perforated tape ZN galvanized steel tape TGB-25x2.0MM (ring with 10M). Applications: pendulum mounting, anchoring, etc. in electrical, construction, heating, water and sanitary installations. Advantages: wide range, suitable for light and heavy loads, suitable for almost all installation cases under all environmental conditions, corrosion-resistant, easy to cut and shape.
Lieske Part No.: 1861581

Installation tape/perforated tape, plastic and galvanized, TPG-12x0.7 white (ring with 10M). Applications: pendulum mounting, anchoring, etc. for electrical, building, heating, water and sanitary installations. Advantages: wide range, suitable for light and heavy loads, suitable for almost all installation cases under all environmental conditions, corrosion-resistant, easy to cut and shape.
Lieske Part No.: 1861521

TORIX T6 red cable twisting aid Schneider Electric 100 pieces/pack. TORIX T6 cable connectors for use with all types of cable combinations. The connections are equipped with a test hole that makes testing the connection easy with conventional test instruments. TORIX T6 is approved for all types of cable connections from 0.5 sqmm to 12.5 sqmm. Advantages: Test hole at the top for quick and easy testing of the voltage, hexagon wrench surface for 1/4 inch wrench, ergonomically shaped wings, it is not necessary to twist stripped cables. Can be unscrewed and reused in the same or a larger cable area, one product for all connections Material: PA polyamide, Approval: For 440 V according to IES Standard 685-2-4.
Sales unit: 100 pieces
Lieske Part No.: 1852632

Wiring set IVE for Masterpact NT/NW/NS630b-1600 fixed installation/drawer-in.
Lieske Part No.: 591479

Collar washer for covering screw heads type TTI-KB. Disc washers for covering the screw heads inside the installation ducts to protect simply insulated cables. Material PE.
Sales unit: 100 pieces
Lieske Part No.: 1860597

Cable grommet desk feedthrough aluminum metallic 24/diameter 65mm type CBL-G1. Cable grommet for routing cables through the desk. Material zinc, chrome-plated.
Lieske Part No.: 1860617

Cable grommet desk feedthrough aluminum metallic 24/diameter 85mm type CBL-G2. Cable grommet for routing cables through the desk. Material zinc, chrome-plated.
Lieske Part No.: 1860603

Single pole distribution block for universal mounting frames. It is a clip-on mounting on 35mm DIN rail or Telequick mounting plate.
Sales unit: 10 pieces
Lieske Part No.: 984143

Spacial CRN, 100 pcs. Clip nuts. ISO thread M4. Mounting accessories. For support rails AM1-ED. Mounting bracket 35 mm asymmetrical rail, 35 mm symmetrical rail. Clip-on nut.
Sales unit: 100 pieces
Lieske Part No.: 584532

Spacial CRN, 100 pcs. Clip nuts. ISO thread M5. Mounting accessories for support rails AM1-DP. Mounting bracket 35 mm symmetrical rail. Clip-on nut.
Sales unit: 100 pieces
Lieske Part No.: 584536

Sliding nut diameter -.
Sales unit: 100 pieces
Lieske Part No.: 585296

Spacial SM, 100 pcs. Clip nuts. ISO thread M5. Mounting accessories. Device short name AM3EC AM3MU. Clip-on nut. Accessories included with the housing: channel bracket, pre-slotted mounting plates (Telequick).
Sales unit: 100 pieces
Lieske Part No.: 580177

Spacial SM, 100 pcs. Clip nuts. ISO thread M6. Mounting accessories. Device short name AM3EC AM3MU. Clip-on nut. Accessories included with the housing: fastening tab, pre-slotted mounting plates (Telequick).
Sales unit: 100 pieces
Lieske Part No.: 580181

Spacial CRN, 100 pcs. Fastening screws. ISO thread M5 x 18mm. Mounting bracket Asymmetric DZ5-MB rail, Combi AM1-ED rail, Omega AM1-DE rail, Omega AM1-DP rail. Slotted hexagon head. Set of 100 pieces.
Sales unit: 100 pieces
Lieske Part No.: 623196

Linergy. Assortment with 200 marking sleeves. Marking sleeves, yellow, 0-9, 200 pieces each. For wire end ferrules DZ5CAxxxx or marking flag AR1SC03. Incl. 400 coloured sleeves (green + yellow), 200 characters + and 200 characters -, 1 slip-on fork.
Lieske Part No.: 125073

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 0 printed in black. It also contains 400 grounding markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 300326

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 1 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 308077

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with number 2 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 305554

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 3 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 309867

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 4 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 309868

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 5 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 316293

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 6 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 221514

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with number 7 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 236345

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with the number 8 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 234661

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with number 9 printed in black. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 265250

Marking sleeve, yellow, packaging unit: 200 pieces, unlabelled.
Sales unit: 200 pieces
Lieske Part No.: 560717

Sales unit: 200 pieces
Lieske Part No.: 650684

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with black + symbol. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 401945

Marking accessory for insulated, markable cable ends of Linergy TR products. It is a wallet of markers for DZ5CA cable ends or clip-on marker tags. It contains a bag of 200 yellow tags with black symbol. It also contains 400 ground markers and 1 tool for positioning the markers.
Sales unit: 200 pieces
Lieske Part No.: 401956

Assortment with 200 marking collars. For ferrules DZ5-CA ... or designation flag AR1-SC03, including 400 color sleeves (green + yellow), 200 characters + and 200 characters -, 1 Aufsteckgabel execution: letters A to Z, respectively 200 pieces Type: AR1MB01
Sales Unit: 1 ST.
Lieske Part No.: 411199

Marking sleeve, yellow, packaging unit: 200 pieces, sign O.
Sales unit: 200 pieces
Lieske Part No.: 291306