Installation Material

CHESK-3I(A) hybrid terminations are suitable for all 3-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs.
Lieske Part No.: 1587696

CHESK-3F(A) hybrid terminations are suitable for all 3-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs.
Lieske Part No.: 1587697

Individually dosable 2-component potting compound in bottles as an all-in-one solution with mixing cup and spatula for the reliable protection of electrical and electronic components.
Lieske Part No.: 648357

Universell verwendbar zum Verbinden von Kunststoffkabeln mit Isolierungen aus PVC, PE und VPE (z. B. N(A)YY, NYM, TT). Mit Schraubverbindern mit Abreiskopfschrauben, geeignet für Aluminium- und Kupferleiter.
Lieske Part No.: 687860

The screwable Cellplux CTS cable plug connectors are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 36 kV with device plug connectors for outer cone systems type C according to EN 50180 and EN 50181.
Lieske Part No.: 1351496

The screwable Cellplux CTS cable plug connectors are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 36 kV with device plug connectors for outer cone systems type C according to EN 50180 and EN 50181.
Lieske Part No.: 1351497

Die schraubbaren Cellplux Kabelsteckanschlüsse CTS eignen sich für den Anschluss von allen kunststoffisolierten Einleiterkabeln (PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) sowie Schirmgestaltungen (Draht- oder Bandschirm) an Schaltanlagen und Transformatoren für maximale Netzspannung bis 36 kV mit Gerätesteckanschlüssen für Außenkonus-Systeme Typ C nach EN 50180 und EN 50181.
Lieske Part No.: 690688

Die schraubbaren Cellplux Kabelsteckanschlüsse CTS eignen sich für den Anschluss von allen kunststoffisolierten Einleiterkabeln (PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) sowie Schirmgestaltungen (Draht- oder Bandschirm) an Schaltanlagen und Transformatoren für maximale Netzspannung bis 36 kV mit Gerätesteckanschlüssen für Außenkonus-Systeme Typ C nach EN 50180 und EN 50181.
Lieske Part No.: 1284387

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344041

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344040

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344039

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344038

For the voltage-resistant termination of unarmoured plastic cables as well as plastic cables with concentric conductors with insulation made of PVC, PE and XLPE (e.g. N(A)YY, N(A)XY, TT, N(A)2Y2Y, N(A)2X2Y, N(A)YC(W)Y).
Lieske Part No.: 1588147

Für den spannungsfesten Endabschluss von unarmierten Kunststoffkabeln sowie von Kunststoffkabeln mit konzentrischem Leiter mit Isolierungen aus PVC, PE und VPE (z. B. N(A)YY, N(A)XY, TT, N(A)2Y2Y, N(A)2X2Y, N(A)YC(W)Y).
Lieske Part No.: 831365

The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 2121733

The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 2094389

The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 2094390

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051653

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051654

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2062571

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051655

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051656

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051657

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2062572

Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051658

Suitable for use on lead and aluminum cable sheaths, adhesive tapes or cable shielding wires and steel or aluminum armouring wires.
Sales unit: 10 pieces
Lieske Part No.: 2051659

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2128640

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 110268

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1102680

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1102686

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2135522

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2115998

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 838814

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1062552

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 680631

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1062553

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 871622

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1062554

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 838818

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 838821

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 838822

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Lieske Part No.: 838823

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 680634

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1102689

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2121734

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2135523

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2121735

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2121736

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2121737

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 871625