Installation Material

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337822

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337821

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337790

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337834

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 1337747

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 5000 pieces
Lieske Part No.: 1439206

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337760

The detectable mounting base can be identified by metal detectors and X-ray machines. The blue color also makes visual recognition easier. This series is therefore particularly suitable for applications such as in the food and pharmaceutical industries. The detectable base is available in several variations. It can be purchased as a flat profile base, as a base for screw mounting, as a base with a support saddle and as a base with 2 and 4 entries. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 1337759

The U-shaped serrated edge protector is ideal for protecting cables and wires when passing through, for example, housings and sheets. The narrow profile of the edge protector fits snugly against the punched cutout and provides clean, mechanical protection. If necessary, a drop of epoxy reinforces the edging. The powerful and reliable edge protector is particularly suitable for inner radii and is also easy to work with. It is available on a roll in various sizes for different sheet thicknesses.
Lieske Part No.: 300030

The four-entry mounting base features a new design and material for higher stress levels. The flat, ramp-like design saves space and makes it easier to insert the tie. The mounting base also has longer struts (to the edge of the base) for better fastening and a special adhesive mixture for high pull-off forces. For greater strength, the base can also be fastened with two screws. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 500 pieces
Lieske Part No.: 879785

The four-entry mounting base features a new design and material for higher stress levels. The flat, ramp-like design saves space and makes it easier to insert the tie. The mounting base also has longer struts (to the edge of the base) for better fastening and a special adhesive mixture for high pull-off forces. For greater strength, the base can also be fastened with two screws. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 100 pieces
Lieske Part No.: 1439010

The four-entry mounting base features a new design and material for higher stress levels. The flat, ramp-like design saves space and makes it easier to insert the tie. The mounting base also has longer struts (to the edge of the base) for better fastening and a special adhesive mixture for high pull-off forces. For greater strength, the base can also be fastened with two screws. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 928950

The two-entry mounting base is available in four material variations. These are natural-colored standard polyamide 6.6, black UV-resistant polyamide 6.6, flame-retardant polyamide 6.6 and the high-quality ETFE fluoropolymer (aquamarine blue) for use in extreme conditions. It is available with a foam-coated adhesive surface made of synthetic polymer, without a self-adhesive surface for screwing or for gluing with 2-component adhesive. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 1235894

The two-entry mounting base is available in four material variations. These are natural-colored standard polyamide 6.6, black UV-resistant polyamide 6.6, flame-retardant polyamide 6.6 and the high-quality ETFE fluoropolymer (aquamarine blue) for use in extreme conditions. It is available with a foam-coated adhesive surface made of synthetic polymer, without a self-adhesive surface for screwing or for gluing with 2-component adhesive. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Lieske Part No.: 300036

The two-entry mounting base is available in four material variations. These are natural-colored standard polyamide 6.6, black UV-resistant polyamide 6.6, flame-retardant polyamide 6.6 and the high-quality ETFE fluoropolymer (aquamarine blue) for use in extreme conditions. It is available with a foam-coated adhesive surface made of synthetic polymer, without a self-adhesive surface for screwing or for gluing with 2-component adhesive. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Lieske Part No.: 1318096

The mounting base made of aluminum (3003, ASTMB-209) is characterized by its low installation height, which makes it very space-saving. In addition, the soft material (aluminum) can be easily adapted to contours and is also lightweight. The stable base is self-adhesive, but can also be glued or screwed on. In addition, the mounting base is resistant to aging even under extreme temperatures. The high-performance fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 1318263

The cable fastening base with support saddle guarantees high stability thanks to its compact design. The prism-shaped saddle ensures that wires and cables are secured against twisting. In addition, it is non-conductive, corrosion-proof and resistant to fuels, lubricants and most chemicals. The binder base can be screwed or riveted on. It is available in natural or black UV-resistant, heat-stabilized versions. The high-performance fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 500 pieces
Lieske Part No.: 202931

The mounting base with integrated expanding rivet is very easy to install in normal holes or blind holes, as the expanding rivet base only needs to be inserted into the hole provided and the expanding mandrel needs to be hammered in with a hammer up to the base surface. The base is also characterized by its flat design. In addition, the bases are color-coded to distinguish them depending on the expanding rivet and hole diameter. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Lieske Part No.: 338787

The mounting base with plug-in clip is ideal for concealed mounting (blind mounting). The mounting clip contains a plug-in nose for housings as well as mounting and front panels. The flat design is also very advantageous because the base is so easy to handle. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 1318261

The fastening base for screw mounting in a particularly small and low design is characterized by its easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Lieske Part No.: 1586581

Der hochbelastbare Befestigungssockel für Außeninstallationen ist eine stabile und dauerhafte Befestigungslösung für Rohrleitungen, Schläuche und Kabel im Freien. Er ist in mehreren Variationen erhältlich. So ist er zum einen mit integriertem Dübel für Wandmontagen verfügbar. Da der Dübel lediglich in eine Bohrung eingeschlagen werden muss, erfolgt die Montage hierbei problemlos. Darüber hinaus sorgt der aus lamellenartig übereinander angeordneten Schichten bestehende Dübel für eine höhere Belastbarkeit und dauerhaften Halt. Zum anderen kann der Sockel auch mit Auflagesattel in ergonomischer Form für die problemlose Montage erworben werden. Hierbei kann er sowohl angeschraubt als auch angenietet werden. Der leistungsstarke Befestigungssockel vervollständigt die Produktpalette unserer zuverlässigen Premium-Kabelbinder und deckt die am häufigsten angefragten Anwendungsmöglichkeiten im Kabelmanagement ab.
Sales unit: 25 pieces
Lieske Part No.: 955119

The fastening base for screw mounting in a particularly small and low design is characterized by its easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 1581147

The cable fastening base with support saddle guarantees high stability thanks to its compact design. The prism-shaped saddle ensures that wires and cables are secured against twisting. In addition, it is non-conductive, corrosion-proof and resistant to fuels, lubricants and most chemicals. The binder base can be screwed or riveted on. It is available in natural or black UV-resistant, heat-stabilized versions. The high-performance fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 500 pieces
Lieske Part No.: 1581146

The fastening base for screw mounting is characterized by its low height and easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Lieske Part No.: 118783

GD-001-TB Cable edge holder, heat stabilizing, PA6.6
Lieske Part No.: 645143

TC402 Cable edge holder, U-type, weather resistant, black
Lieske Part No.: 645147

TC403 Cable edge holder, W-type, weatherproof, black, cable parallel to frame,
Lieske Part No.: 645151

TC401 Cable edge holder, acetal copolymer, black
Lieske Part No.: 645144

TC412X Cable edge holder, U-type, weather resistant, black, PA 6.6, heat stabilizing,
Lieske Part No.: 645148

TC413X Cable edge holder, W-type, weather resistant, black, PA 6.6, heat stabilizing,
Lieske Part No.: 645155

The mounting base for screw mounting for cross bundling is characterized by its particularly low height and its ease of use. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted. It is equipped with 4 entries for inserting cable ties, which makes cross mounting possible. The mounting base with integrated, angled support is ideal for cables, pipes, lines and hoses. The two mounting holes make the base particularly resilient - it can be screwed or riveted. Parallel, double or cross mounting are possible. It is also particularly suitable for cable harnesses with a large diameter. The powerful mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 200 pieces
Lieske Part No.: 1337758

The screw-on cable strips enable the simultaneous installation of up to 6 cable bundles or other parts. Installation can be carried out particularly quickly because the cable tie is guided through the cable strip during assembly. In addition, our cable strips are available in several variations. On the one hand, they can be purchased in a flat design, which allows several cable strands to be installed easily and safely at the same time. On the other hand, the cable strip is available with a slot on one side, which leads to more flexibility during installation. There is also a strip for vertical installation and fastening on both sides. The powerful screw-on cable strip completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 303832

The screw-on cable strips enable the simultaneous installation of up to 6 cable bundles or other parts. Installation can be carried out particularly quickly because the cable tie is guided through the cable strip during assembly. In addition, our cable strips are available in several variations. On the one hand, they can be purchased in a flat design, which allows several cable strands to be installed easily and safely at the same time. On the other hand, the cable strip is available with a slot on one side, which leads to more flexibility during installation. There is also a strip for vertical installation and fastening on both sides. The powerful screw-on cable strip completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 1778769

TY-TOTE-25 Belt bag dispenser, dispenser for TY25M incl. 1 pack
Lieske Part No.: 582370

The self-adhesive PVC cable holder is ideal for one or more layers of ribbon cables. The flexible and raised tongue allows easy insertion and installation of cables. The clamps are supplied in pairs on foam-coated, rubber-based adhesive tape. The powerful cable holders complete the product range of our reliable premium cable ties and cover the most frequently requested applications in cable management.
Sales unit: 100 pieces
Lieske Part No.: 1325383

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1584495

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 223168

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 300039

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 105017

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 105015

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 300045

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 105304

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1317167

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 118411

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1311020

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 978520

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1311287

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1311017

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 1317164

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 1317166