Installation Material

Inductive proximity switches according to DIN EN 60947-5-2. They detect the presence of metallic, electrically conductive objects in their measuring field without contact. The robust sensors can be used in a variety of ways in industry, e.g. in speed applications or for position determination.
Lieske Part No.: 265029

Lieske Part No.: 780692

Lieske Part No.: 779066

Lieske Part No.: 595667

Lieske Part No.: 704037

Lieske Part No.: 144927

Now there's a single stripping tool for multiple applications! The Universal Stripping Tool holds two cartridges. The cartridge in use loads easily into a slot for stripping, and an additional cartridge can be kept in a compartment in the body of the tool.
The UTP cartridge (included) is moulded from durable glass-filled polycarbonate, and its precision steel cutting blade is accurately set to industry-standard depth. The cartridge is configured for RJ-45 plugs. It can easily remove a UTP cable's outer jacket without nicking the twisted-pair conductors.

Now there's a single stripping tool for multiple applications! The Universal Stripping Tool holds two cartridges. The cartridge in use loads easily into a slot for stripping, and an additional cartridge can be kept in a compartment in the body of the tool.

The UTP cartridge (included) is moulded from durable glass-filled polycarbonate, and its precision steel cutting blade is accurately set to industry-standard depth. The cartridge is configured for RJ-45 plugs. It can easily remove a UTP cable's outer jacket without nicking the twisted-pair conductors.

Of course, not all cable is UTP! That’s why we also offer cartridges for coax and CATV cables. These cartridges are made from the same high-quality polycarbonate as the UTP cartridge, so your prep work is always quick and accurate.
Lieske Part No.: 699188

Cable ties secure the tags on your cable
They’re ideal for bundling cable
Comes with 100 pack
Lieske Part No.: 701343

Cable ties with ID plate include a built-in label area
Comes with 100 pack

technical data:

FT8350
Length - 10,2 cm
Maximum bundle diameter - 1,9 cm
label size - 8 x 25mm

FT8360
Length - 19,1 cm
Maximum bundle diameter - 4,4 cm
label size - 13 x 30 mm

FT8361
Length - 36,8 cm
Maximum bundle diameter - 10,2 cm
label size - 13 x 57 mm
Lieske Part No.: 200609

Don't let dangling, unorganized cables spoil your day. Keep a roll of Hook Loop Bundle Wrap on hand for a simple fix. The cable wrap is 1.6-cm wide and is available in 4.5-m or 22.8-m. For your convenience, FT9555A includes eight (8) 22.8-m reels, for a total of 182.8 meters.

All you have to do is grab a pair of scissors, bundle your cables, and snip. No more tripping over unsecured cables in your office or home!
Lieske Part No.: 185210

Sales unit: 1 ST.
Lieske Part No.: 1104499

Lighting insert for Busch-priOn® surface control element 1-way (6340-xxx) and 3-way (6342-xxx) with symbol >Scene<. Only for use in 1-way and 3-way control elements.
Lieske Part No.: 172830

Lieske Part No.: 887428

Conductor and cable markings simplify installation and maintenance and help with troubleshooting.
Lieske Part No.: 303251

Heat shrink end caps SKH with adhesive, as pressure and moisture protection for cables, lines and pipes from 5 - 105 mm diameter.
Sales unit: 10 pieces
Lieske Part No.: 867697

Sealing 3-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 10 pieces
Lieske Part No.: 1578892

Sealing 3-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 786902

Sealing 2-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 10 pieces
Lieske Part No.: 923120

Sealing 2-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 20 pieces
Lieske Part No.: 909598

Barrier tape red/white
Lieske Part No.: 819826

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). Suitable for compression connectors on aluminum and copper cables.
Lieske Part No.: 564805

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 971551

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 913315

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 758306

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). Suitable for compression connectors on aluminum and copper cables.
Lieske Part No.: 271269

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 961024

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 300 meters
Lieske Part No.: 490847

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 150 meters
Lieske Part No.: 961400

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 150 meters
Lieske Part No.: 961343

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 100 meters
Lieske Part No.: 961171

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 100 meters
Lieske Part No.: 490878

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 100 meters
Lieske Part No.: 961212

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 961254

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 490880

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962958

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962370

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 963354

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 490889

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 963317

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 1315402

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 962467

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 962640

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 963083

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 300 meters
Lieske Part No.: 490908

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 300 meters
Lieske Part No.: 490886

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 150 meters
Lieske Part No.: 1578753

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 150 MTR
Sales unit: 150 meters
Lieske Part No.: 490890

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 100 meters
Lieske Part No.: 806193

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 100 meters
Lieske Part No.: 964096

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 1316302