Installation Material

Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 810342

Sealing 3-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 1578875

Sealing 2-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 10 pieces
Lieske Part No.: 953480

Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 567871

Heat shrink connection sleeve can be used universally for connecting plastic cables and lines with a nominal voltage of 3.5 kV DC.
Lieske Part No.: 1346417

Sealing 3-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 271167

CHE-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 1316148

CHE-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 930198

CHE-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 1013558

CHE-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 1316133

CHE-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 1580282

Hybrid-Endverschlüsse CHE-F eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Kupferdraht- oder Bandschirm). Geeignet für Presskabelschuhe.
Lieske Part No.: 490834

Hybrid-Endverschlüsse CHE-F eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Kupferdraht- oder Bandschirm). Geeignet für Presskabelschuhe.
Lieske Part No.: 490837

CHE-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 1013559

CHE-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 805872

CHE-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 1578896

Contrax CAE-I terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 305024

Contrax CAE-I terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 305019

Contrax CAE-I terminations are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 749847

Contrax terminations CAE-F are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (wire or tape shield). Suitable for compression cable lugs.
Lieske Part No.: 961827

The heat shrink tubing type SRBB is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications are medium-voltage switchgear up to 36 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 957381

The heat shrink tubing type SRBB is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications are medium-voltage switchgear up to 36 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 971592

The heat shrink tubing type SRBB is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications are medium-voltage switchgear up to 36 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 442118

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 420701

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 717785

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 135903

Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors.
Lieske Part No.: 107384

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 1583795

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 898416

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 970377

Die Warmschrumpfschläuche vom Typ SB 3:1 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Lieske Part No.: 494974

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 1311303

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 976263

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 897510

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 897530

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 897887

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 897888

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 897889

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 252412

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 737032

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 494471

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 897890

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 299851

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 971251

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 897891

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 494472

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 501797

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 799442

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 853122

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 385986