Installation Material

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490889

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 963317

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 1315402

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 962467

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 962640

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 963083

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 300 meters
Lieske Part No.: 490908

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 300 meters
Lieske Part No.: 490886

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 150 meters
Lieske Part No.: 1578753

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 150 meters
Lieske Part No.: 490890

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 100 meters
Lieske Part No.: 806193

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 100 meters
Lieske Part No.: 964096

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 1316302

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 963040

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 961665

Die Warmschrumpfschläuche vom Typ SB 2:1 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Lieske Part No.: 2144086

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 295688

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 169668

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 634076

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 941365

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 391240

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 956376

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 510156

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 211362

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 583104

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 490363

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 500605

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 131337

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 154629

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 728529

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 753781

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 955273

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 468220

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 485796

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 273277

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 394839

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 424176

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 857310

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 902252

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 512124

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1316164

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 441462

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 220006

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 499390

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 314652

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 304995

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 413734

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 171760

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 694451

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 298154