Installation Material

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 108877

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 584095

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 610844

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 395528

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 898424

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 134169

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Sales unit: 5 pieces
Lieske Part No.: 577586

Universally applicable for connecting cables with EPR insulation (e.g. A07RN-F, H07RN-F). Suitable for press connectors.
Lieske Part No.: 1346063

Sealing 5-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 1323841

Sealing 5-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 196871

Sealing 5-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 994312

Die Warmschrumpfschläuche vom Typ SRBB sind mittelwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind Mittelspannungs-Schaltanlagen bis 36 kV sowie Schutz gegen Korrosion.
Lieske Part No.: 500184

Die Warmschrumpfschläuche vom Typ SRBB sind mittelwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind Mittelspannungs-Schaltanlagen bis 36 kV sowie Schutz gegen Korrosion.
Lieske Part No.: 500185

The heat shrink tubing type SRBB is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications are medium-voltage switchgear up to 36 kV and protection against corrosion.
Lieske Part No.: 1564605

The heat shrink tubing type SRBB is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications are medium-voltage switchgear up to 36 kV and protection against corrosion.
Lieske Part No.: 1323840

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 829067

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 933146

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 909486

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 471678

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 594731

Mouldable, thermoplastic putty sealant based on butyl rubber. It can be easily moulded into precise shapes and allows for quick and high-quality sealing options.
Lieske Part No.: 968076

The pluggable Cellplux angle cable connectors CWS are suitable for the connection of all single-core cables with XLPE or (H)EPR) insulation, with PVC or PE outer sheath, with different conductive layers (stripable or removable) as well as shield designs (wire or tape shield) to switchgear, transformers and junction boxes for maximum mains voltage up to 36 kV for bushings with outer cone type B according to EN 50180 and EN 50181.
Lieske Part No.: 181984

The pluggable Cellplux angle cable connectors CWS are suitable for the connection of all single-core cables with XLPE or (H)EPR) insulation, with PVC or PE outer sheath, with different conductive layers (stripable or removable) as well as shield designs (wire or tape shield) to switchgear, transformers and junction boxes for maximum mains voltage up to 36 kV for bushings with outer cone type B according to EN 50180 and EN 50181.
Lieske Part No.: 140709

The pluggable Cellplux angle cable connectors CWS are suitable for the connection of all single-core cables with XLPE or (H)EPR) insulation, with PVC or PE outer sheath, with different conductive layers (stripable or removable) as well as shield designs (wire or tape shield) to switchgear, transformers and junction boxes for maximum mains voltage up to 36 kV for bushings with outer cone type B according to EN 50180 and EN 50181.
Lieske Part No.: 141014

For quickly connecting and insulating drilled or otherwise damaged cables without inserting new cable parts. The cable repair kit restores the electrical and mechanical properties of the installation cable.
Sales unit: 20 pieces
Lieske Part No.: 288791

Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 435459

The voltage-resistant insulating caps CIK are used for the electrical insulation of device connection parts type A 250A and type C 630A according to EN 50180 and EN 50181 on encapsulated switchgear and transformers up to 36 kV.
Lieske Part No.: 1321077

The voltage-resistant insulating caps CIK are used for the electrical insulation of device connection parts type A 250A and type C 630A according to EN 50180 and EN 50181 on encapsulated switchgear and transformers up to 36 kV.
Lieske Part No.: 1321076

Universell verwendbar zum Übergang von Kabeln mit Papierisolierung auf Kabel mit Isolierungen aus PVC, PE und VPE, z. B. NAKLEY, N(A)KBA auf N(A)YY. Mit Schraubverbindern mit Abreißkopfschraube, geeignet für Aluminium- und Kupferleiter.
Lieske Part No.: 506157

Universally applicable for transition from cables with paper insulation to cables with insulation made of PVC, PE and VPE, e.g. NAKLEY, N(A)KBA to N(A)YY. With screw connectors with shear-off head screw, suitable for aluminum and copper conductors.
Lieske Part No.: 1321191

Contrax terminations CAESK-F are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (wire or tape shield). With screw cable lugs.
Lieske Part No.: 1566696

Contrax Endverschlüsse CAESK-I eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Draht- oder Bandschirm). Mit Schraubkabelschuhen.
Lieske Part No.: 506161

Contrax terminations CAESK-I are suitable for all 1-core plastic cables (PVC, PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (wire or tape shield). With screw cable lugs.
Lieske Part No.: 985270

CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 1585897

CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 1585950

Cellplux angle cable plug connectors CWS are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 24 kV with device plug connectors for outer cone systems type A according to EN 50180 and EN 50181.
Lieske Part No.: 709360

Cellplux straight cable plug connections CGS are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 24 kV with device plug connections for outer cone systems type A according to EN 50180 and EN 50181
Lieske Part No.: 885504

Universell verwendbar zum Verbinden von Kunststoffkabeln mit Isolierungen aus PVC, PE und VPE (z. B. N(A)YY, NYM, TT). Mit Schraubverbindern mit Abreiskopfschrauben, geeignet für Aluminium- und Kupferleiter.
Lieske Part No.: 1095401

Cellplux angle cable plug connectors CWS are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 24 kV with device plug connectors for outer cone systems type A according to EN 50180 and EN 50181.
Lieske Part No.: 983253

Cellplux gerade Kabelsteckanschlüsse CGS eignen sich zum Anschluss aller kunststoffisolierten Einleiterkabel (PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) sowie Schirmgestaltungen (Draht- oder Bandschirm) an Schaltanlagen und Transformatoren fu¨r maximale Netzspannung bis 24 kV mit Gerätesteckanschlüssen fu¨r Außenkonus-Systeme Typ A nach EN 50180 und EN 50181
Lieske Part No.: 508912

Prüfset CPS dient der galvanischen Kopplung zwischen den Kabelleitern an allen Cellplux T-Steckanschlüssen Typ CTS und Typ CTKS.
Lieske Part No.: 512855

Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 2128078

CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 1585896

CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 999443

CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 686206

CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 574433

Hybrid-Endverschlüsse CHESK-I eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Kupferdraht- oder Bandschirm). Mit Schraubkabelschuhen für Hauptleiter und Kupferdrahtschirm.
Lieske Part No.: 512922

Hybrid-Endverschlüsse CHESK-F eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Kupferdraht- oder Bandschirm). Mit Schraubkabelschuhen für Hauptleiter und Kupferdrahtschirm.
Lieske Part No.: 512921

CHESK-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 991121

CHESK-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 576953