Installation Material

Protective conductor terminal 6mm², 2 connections, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 361413

Feed-through terminal 6mm² phase, 800V-41A, 2 connections, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 469939

Feed-through terminal 6mm²-neutral, 800V-41A, 2 connections, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 870124

Feed-through terminal 10mm²-neutral, 800V-57A, 2 connections, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 2112160

Protective conductor terminal 16mm², 2 connections, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 948865

Feed-through terminal 16mm² phase, 800V-76A, 2 connections, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 679765

Protective conductor terminal 10mm², plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 657765

Feed-through terminal block phase 10mm², 800V-57A, plug-in technology. Series terminal block for distributor/cabinet on a DIN rail.
Lieske Part No.: 190496

Feed-through terminal block-neutral 10mm², 1000V-57A, plug-in technology. Series terminal block for distributor/cabinet on a DIN rail.
Lieske Part No.: 129577

Protective conductor terminal 16mm², plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 887961

Feed-through terminal phase 16mm², 800V-76A, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 323461

N-isolating terminal for N-SaS 16mm², 1 connection, plug-in technology. Series terminal for distributor/cabinet on a DIN rail.
Lieske Part No.: 572564

Feed-through terminal block-neutral 16mm², 800V-76A, plug-in technology. Series terminal block for distributor/cabinet on a DIN rail.
Lieske Part No.: 901220

Quick fastening spring (10 pieces), 20 mm wide with screw
Lieske Part No.: 371586

Cylinder tapping screw 3.5x12.0 +/- PZ1, for fastening the PE/N terminals
Lieske Part No.: 415005

Cover for main line branch terminal 35mm²
Lieske Part No.: 534458

Screw connection M8x20mm stainless steel
Lieske Part No.: 1596911

Screws M12x30 for busbar connection rust-protected
Lieske Part No.: 1596910

Contact protection cover universN 75x250mm closed. Replacement item for retrofitting in a low-voltage distribution up to 1600A, rated voltage 3AC 690 V / 50Hz. Sealable contact protection covers as standard, reinforced using an internal gas pressure process with four quick-release bolts each. VDE mark approval according to DIN EN 61439-1/-2/-3 (VDE 0660 Part 600-1/-2/-3), dimensional standard: DIN 43870.
Lieske Part No.: 662994

Contact protection cover universN 150x750mm closed. Replacement item for retrofitting in a low-voltage distribution up to 1600A, rated voltage 3AC 690 V / 50Hz. Sealable contact protection covers as standard, reinforced using an internal gas pressure process with four quick-release bolts each. VDE mark approval according to DIN EN 61439-1/-2/-3 (VDE 0660 Part 600-1/-2/-3), dimensional standard: DIN 43870.
Lieske Part No.: 252046

Contact protection cover universN 300x750mm closed. Replacement item for retrofitting in a low-voltage distribution up to 1600A, rated voltage 3AC 690 V / 50Hz. Sealable contact protection covers as standard, reinforced using an internal gas pressure process with four quick-release bolts each. VDE mark approval according to DIN EN 61439-1/-2/-3 (VDE 0660 Part 600-1/-2/-3), dimensional standard: DIN 43870.
Lieske Part No.: 714227

Contact protection cover universN 450x500mm closed. Replacement item for retrofitting in a low-voltage distribution up to 1600A, rated voltage 3AC 690 V / 50Hz. Sealable contact protection covers as standard, reinforced using an internal gas pressure process with four quick-release bolts each. VDE mark approval according to DIN EN 61439-1/-2/-3 (VDE 0660 Part 600-1/-2/-3), dimensional standard: DIN 43870.
Lieske Part No.: 503093

Contact protection cover universN 450x750 closed. Replacement item for retrofitting in a low-voltage distribution up to 1600A, rated voltage 3AC 690 V / 50Hz. Sealable contact protection covers as standard, reinforced using an internal gas pressure process with four quick-release bolts each. VDE mark approval according to DIN EN 61439-1/-2/-3 (VDE 0660 Part 600-1/-2/-3), dimensional standard: DIN 43870.
Lieske Part No.: 333406

Contact protection cover universN 600x250mm closed. Replacement item for retrofitting in a low-voltage distribution up to 1600A, rated voltage 3AC 690 V / 50Hz. Sealable contact protection covers as standard, reinforced using an internal gas pressure process with four quick-release bolts each. VDE mark approval according to DIN EN 61439-1/-2/-3 (VDE 0660 Part 600-1/-2/-3), dimensional standard: DIN 43870.
Lieske Part No.: 918618

Hexagon nut M12 (100 pieces)
Lieske Part No.: 2115581

Setzmutter M10 , für Isolierträger-Profil (12 Stück)
Lieske Part No.: 640294

Setting nut M12, for busbars (12 pieces)
Lieske Part No.: 1101783

Setting nut M8, for insulation support profile (12 pieces)
Lieske Part No.: 1991218

PE/N terminal, 90SL, 2 x 70 mm², for U81P, U82P. Meter cabinet solution Cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, flush-mounted or partially recessed installation. Consists of a cabinet with door made of powder-coated, baked-in, sturdily profiled 1 mm thick sheet steel. Interior lining made entirely of plastic. Cable entries at the top and bottom through built-in plastic flange plates. Rear pre-punching in the plastic part. Busbar bushings as flanges on both sides that can be opened without tools in the lower area as a way of connecting busbars between different cabinets or in conjunction with a cable junction box and connection set. In addition to the bushing in the NAR, there are also openings in the area of the AAR (for installation heights of 1100 and 1400 mm) and RfZ (for installation heights of 1100 mm). Door flush with the front with internal, adjustable hinges, can be opened on the right or left with an opening angle of 110°. Door lock with cam lock. Door lock can be replaced with other locks. Cabinets can be flanged next to each other or one above the other. Cabinet size 1 to 5 fields with 72 to 540 space units (PLE). Note: The main line must be inserted into the lower connection compartment of the meter cabinet from below or from the side and connected there in accordance with VDE-AR-N 4100:2019-04. Height: __ mm (1100mm or 1400mm) Width: __ mm Depth: 205 / 160 mm, RAL color: 9010 Protection type 44, protection class II Nominal current of the busbar system 250 A Design in accordance with VDE-AR-N 4100:2019-04 Meter system for __ meter space(s). According to the technical connection conditions (TAB) of the VNB __ for: __ Electronic household meters (eHZ) or __ meters with 3-point fastening (3HZ). __ for supply systems with normal household consumption max. 63 A (10mm²) according to DIN 18015-1 (__ apartments, __ general, __ reserve, __ heat pump) __ for continuous current applications max. 32 A (10 mm²) according to VDE-AR-N 4100:2019-04 (e.g. PV up to 22 KW) __ for continuous current applications max. 44 A (16 mm²) according to VDE-AR-N 4100:2019-04 (e.g. PV up to 30 KW) __ for meter locations with more than 63 A in intermittent operation or 44 A in continuous operation (transformer measurement) Nominal current _ A, nominal power _ kW __ Tariff ripple control receiver as three-point version alternatively __ Tariff ripple control receiver as top-hat rail version __ Distribution panel (__ PLE), with/without busbars for feeding in __ Distribution panel (__ PLE) with APZ room according to VDE-AR-N 4100:2019-04, with/without busbars for feed-in __ Communication panel, 1- or 2-panel __ Communication panel with APZ room according to VDE-AR-N 4100:2019-04, with/without busbars for feed-in __ SLS switch Hager HTS3xxE in __ A.. Voltage tap for power supply additional devices according to VDE-AR-N 4100:2019-04: __ before the SLS with fuse box pluggable 25 kA __ before the SLS with LS switch 10 A / 25 kA __ behind the SLS with fuse box pluggable 25 kA. Surge protection with combination arrester type 1/2/3 for busbar mounting in the UAR.To comply with the requirements of DIN VDE 0100-443 and -534: ___for TNS/TT network, without external lightning protection, back-up fuse in the HAK - 160 A ___for TNC network, without external lightning protection, back-up fuse in the HAK - 160 A ___for TNS/TT network, with external lightning protection, back-up fuse in the HAK - 160 A ___for TNC network, with external lightning protection, back-up fuse in the HAK - 160 A ___for TNS/TT network, with external lightning protection, back-up fuse in the HAK - 315 A ___for TNC network, with external lightning protection, back-up fuse in the HAK - 315 A Fuse for cellar, washing machine, dryer (if TAB / DIN compliant) per WE (max. 6 PLE) __ pieces of FI/LS switch 10 kA, 16 A, 30 mA (ADA516D). General distribution panel equipped with: __ pcs. LS switch 6 kA, 16 A (MBS116) __ pcs. FI/LS switch 6 kA, 16 A, 30 mA (ADS916D) __ pcs. RCD type 40 A 4-pole, 30 mA (CDS440D). Consisting of: __ pcs. ZB__S, meter cabinet __ pcs. ZK__ Complete panel for __ meters __ selected make/type: HAGER/univers Z or equivalent, supply, install and connect ready for operation.
Lieske Part No.: 699866

Cable gland, for base housing, clamping range: 11.5 ... 15.5 mm, black
Sales unit: 10 pieces
Lieske Part No.: 768225

Reduction, with O-ring, Pg 21 Pg 13.5
Sales unit: 10 pieces
Lieske Part No.: 754151

Reduction, with O-ring, Pg 21 Pg 16
Sales unit: 10 pieces
Lieske Part No.: 808243

Reduction, with O-ring, Pg 29 Pg 21
Sales unit: 10 pieces
Lieske Part No.: 838097

Blind plug, with O-ring, Pg 13.5, wrench size: 22, metal
Sales unit: 10 pieces
Lieske Part No.: 973770

Cable gland, Pg 11, clamping range: 7 ... 10.5 mm, cable gland material: metal, IP68, wrench size: 22
Sales unit: 10 pieces
Lieske Part No.: 944826

Cable gland, Pg 16, clamping range: 7 ... 10.5 mm, cable gland material: metal, IP68, wrench size: 24
Sales unit: 10 pieces
Lieske Part No.: 548740

Cable gland, Pg 21, clamping range: 7 ... 10.5 mm, cable gland material: metal, IP68, wrench size: 30
Sales unit: 10 pieces
Lieske Part No.: 816950

Cable gland, Pg 36, clamping range: 32 ... 36 mm, cable gland material: metal, IP68, wrench size: 50
Sales unit: 10 pieces
Lieske Part No.: 860690

Cable gland, Pg 21, clamping range: 13 ... 18 mm, cable gland material: plastic, IP68, wrench size: 33
Sales unit: 10 pieces
Lieske Part No.: 411265

Cable gland, for sleeve housing, for coupling housing, clamping range: 17 ... 20.5 mm, black
Sales unit: 10 pieces
Lieske Part No.: 280487

Cable grommet, for ASI cable, plastic, black
Sales unit: 10 pieces
Lieske Part No.: 110386

Female connector, solder lug connection, rated current: 6 A, contacts: 32, straight, copper alloy, precious metal over Ni on the plug side, Sn over Ni on the connection side, requirement level: 1, according to IEC 60603-2, coding: hole coding, coding with contact loss, PCB mounting: with flange, thermoplastic molding material, glass fiber reinforced, RAL 7032 (pebble gray)
Sales unit: 20 pieces
Lieske Part No.: 734801

Module lock, 2 per pack
Lieske Part No.: 507517

Cable clamp, cable diameter: 6...10 mm, zinc die-cast
Sales unit: 10 pieces
Lieske Part No.: 1595863

Protective cap, for device side, with nylon fastening strap, protection class: IP65, IP67
Sales unit: 10 pieces
Lieske Part No.: 1044634

Protective cap, for cable side, with nylon fastening strap, protection class: IP65, IP67
Lieske Part No.: 1044635

Cable gland, EMC version, Pg 11, clamping range: 4 ... 6.5 mm, shield diameter: 2.5 ... 6.5 mm, cable gland material: metal, IP68, wrench size: 20
Sales unit: 10 pieces
Lieske Part No.: 497667

Connector, wave solder connection, rated current: 7.5 A, socket, size: D-Sub 1, thermoplastic molded material, glass fiber reinforced (PBTP), shell: steel, tinned, white, contacts: 9, copper alloy, precious metal over Ni
Sales unit: 100 pieces
Lieske Part No.: 140825

Male connector, reflow solder connection (SMT), contacts: 12, straight, copper alloy, precious metal over Ni on the plug side, Sn over Ni on the connection side, performance level: 1, liquid-crystal polymer (LCP)
Lieske Part No.: 1779310

Reduced size
Sales unit: 10 pieces
Lieske Part No.: 715945