Installation Material

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 3-8 mm
load limit: 900 N Type: 4H24-2


Package: 10 PCS.
Sales unit: 100 pieces
Lieske Part No.: 271687

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 8-14 mm
Load limit: 900 N

Type: 2-4H58
Package: 10 PCS.
Lieske Part No.: 355447

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 14-20 mm
Load limit: 900 N

Type: 2-4H912
Quantity: 1 unit.

Please order in increments of 100 Packs
Sales unit: 100 pieces
Lieske Part No.: 489607

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 597065

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 575200

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 547508

Knock-on fastener for attaching device boxes, devices and other applications to support flanges. Stainless steel fastener, attaches to flanges from 3 to 8 mm, accepts M6 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 972872

CADDY EM-clamp connections ERICO two zinc coating available in stainless steel flange thickness:
4-2 mm Max load: 45 kg Type: EM9
2-2 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 999204

Fastening element for knocking on, for threaded pin fastening of device boxes, devices and other applications to support flanges. Stainless steel fastening, is attached to flanges from 3 to 8 mm, with M6 x 11 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 386744

Fastening element for knocking on, for threaded pin fastening of device boxes, devices and other applications to support flanges. Stainless steel fastening, is attached to flanges from 8 to 14 mm, with M6 x 11 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 946924

Fastening element for knocking on, for threaded pin fastening of device boxes, devices and other applications on support flanges. Stainless steel fastening, is attached to flanges from 14 to 20 mm, with M6 x 11 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 676229

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 262625

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 1316072

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Lieske Part No.: 109279

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 548922

Provides attachment for nVent CADDY Speed Link assemblies, wire, S-hook or chain from roof purlin and steel joists. Installs from ground level using VAFT tool and conduit.
Sales unit: 100 pieces
Lieske Part No.: 164901

Effective way to attach steel cable and chain to a Z-purlin structural member. Attaches to 1/16-1/4¿ flange with 1/4¿ bore.
Sales unit: 100 pieces
Lieske Part No.: 370521

Trapezoidal ceiling suspension with hole and locking rod. 14 mm hole.
Lieske Part No.: 451689

CADDY-clip MTD
ERICO zinc coating
Model: M6
Screw M 8

Type: TDHM6
Item: 100 ST.
Lieske Part No.: 210907

ERICO CADDY clip MTD-zinc coating Design: M8 grub screw M 6 Type: TDHM8 item:
ST.
Lieske Part No.: 707909

CADDY-clip MTD
ERICO zinc coating
Model: M10
Screw M 10

Type: TDHM10
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 493356

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 25 mm (1¿) diameter.
Sales unit: 50 pieces
Lieske Part No.: 1259765

Non-continuous cable management solution with a wide base and smooth bevelled edges. Provides optimal support for high performance data cables including CAT7 and fibre optic cables. 50mm (2?) diameter.
Sales unit: 50 pieces
Lieske Part No.: 912450

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 75 mm (3¿) diameter.
Sales unit: 25 pieces
Lieske Part No.: 1259764

Non-continuous cable management solution with a wide base and smooth bevelled edges. Provides optimal support for high-performance data cables, including CAT7 and fibre optic cables. 100 mm (4¿) diameter.
Sales unit: 25 pieces
Lieske Part No.: 1259763

Easily installs to beam flanges. Requires no screws, rivets or special tools for assembly. For increased rigidity and strength, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 50 pieces
Lieske Part No.: 1259729

Knock on or install from the ground using the VAFT tool. Requires no screws, rivets or special tools for assembly. For increased rigidity and stability, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 50 pieces
Lieske Part No.: 1259727

Easily installs to raised floor bases. Requires no screws, rivets or special tools for assembly. For added rigidity and stability, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 25 pieces
Lieske Part No.: 1259599

Base clip requires no installation tools. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single holder alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1324112

Reduces tension per TIA 568-C.5.3.1 during installation of high-performance data cables. Includes bracket, screw, mounting bracket, post connector, snap hook and support bracket.
Sales unit: 2 pieces
Lieske Part No.: 1259594

Versatile beam clamp with bottom and side threaded holes for various mounting methods. M6 threaded holes on the bottom and sides.
Lieske Part No.: 407571

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 33 mm (1 5/16¿) diameter.
Sales unit: 50 pieces
Lieske Part No.: 1264075

Easy to use screw for closing conduit and pipe support. 3/4¿ EMT, 19 to 25mm conduit with 1/4¿, 6.4mm bore.
Sales unit: 100 pieces
Lieske Part No.: 1427596

Easy installation to support flanges. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263608

Ideal for attaching to concrete, steel, threaded rod or wood surfaces. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1261699

Non-continuous cable management solution combined with CADDY attachment to threaded rods. 25m (1¿) J-hook with multifunctional M4-M8 (1/4¿) threaded rod suspension, combining optimal support and easy installation.
Sales unit: 50 pieces
Lieske Part No.: 1261667

Non-continuous cable management solution combined with CADDY attachment to threaded rods. 50mm (2¿) J-hook with multifunctional M4-M8 (1/4¿) threaded rod suspension, combining optimal support and easy installation.
Sales unit: 50 pieces
Lieske Part No.: 1261666

Easy installation to support flanges. Pivot bearing to support various cable directions. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263620

Easy installation to support flanges. Pivot bearing to support various cable directions. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1264062

Non-continuous cable management solution combined with CADDY attachment to threaded rods. 33 mm (1 5/16¿) J-hook with multifunctional M4-M8 (1/4¿) threaded rod hanger that combines optimal support and easy installation.
Sales unit: 50 pieces
Lieske Part No.: 1264105

Multifunctional support clamp for mounting rail or threaded rod. Screws included. Assembly in pairs required.
Sales unit: 10 pieces
Lieske Part No.: 171137

Ideal for small amounts of cables. The elastic metal clip keeps its shape when the cables are hooked in from the side. Rounded edges prevent damage to the cable. The cables are laid neatly and professionally. The slim appearance is well suited to small installation spaces.
Sales unit: 50 pieces
Lieske Part No.: 1003344

Ideal for small amounts of cables. The elastic metal clip keeps its shape when the cables are hooked in from the side. Rounded edges prevent damage to the cable. The cables are laid neatly and professionally. The slim appearance is well suited to small installation spaces.
Sales unit: 50 pieces
Lieske Part No.: 1003343

Ideal for small amounts of cables. The elastic metal clip keeps its shape when the cables are hooked in from the side. Rounded edges prevent damage to the cable. The cables are laid neatly and professionally. The slim appearance is well suited to small installation spaces.
Sales unit: 50 pieces
Lieske Part No.: 1003341

Ideal for small amounts of cables. The elastic metal clip keeps its shape when the cables are hooked in from the side. Rounded edges prevent damage to the cable. The cables are laid neatly and professionally. The slim appearance is well suited to small installation spaces.
Sales unit: 50 pieces
Lieske Part No.: 1003340

With insert for functional integrity E30 according to DIN 4102-12. Ideal for small quantities of cables. The elastic metal clip retains its shape when the cables are hooked in from the side. Rounded edges prevent damage to the cable. The cables are laid neatly and professionally. The slim appearance is well suited to small installation spaces.
Sales unit: 50 pieces
Lieske Part No.: 1003342

With insert for functional integrity E30 according to DIN 4102-12. Ideal for small quantities of cables. The elastic metal clip retains its shape when the cables are hooked in from the side. Rounded edges prevent damage to the cable. The cables are laid neatly and professionally. The slim appearance is well suited to small installation spaces.
Sales unit: 50 pieces
Lieske Part No.: 1003339

With insert, the metal cable bracket achieves a functional integrity of E30 according to DIN 4102-12.
Sales unit: 50 pieces
Lieske Part No.: 2068517

Innovativer Sammelhalter mit Funktionserhalt zur Decken- und Wandmontage. Darauf ausgelegt, Installateuren durch den einzigartigen Schließmechanismus, der vom Boden aus betätigt wird, Zeit bei der Arbeit zu sparen, 15 Kabel.
Lieske Part No.: 683620

Innovativer Sammelhalter mit Funktionserhalt zur Decken- und Wandmontage. Darauf ausgelegt, Installateuren durch den einzigartigen Schließmechanismus, der vom Boden aus betätigt wird, Zeit bei der Arbeit zu sparen, 30 Kabel.
Lieske Part No.: 683621