Installation Material

Knock-on flange clamp for attaching threaded rods to a C-purlin structural member. Attaches to 1.5-4mm flanges, accepts an M6 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 709180

Attachment to beams and C-roof purlins. Threaded rod support. Threaded rod hanger can be moved vertically downwards.
Sales unit: 100 pieces
Lieske Part No.: 923073

Attaches to beams and C-purlins. Threaded rod hanger. Threaded rod hanger can be moved vertically downwards. Effortless 'push and go' feature allows installers to simply slide the threaded rod through the mounting hole where it instantly locks into place. Prefabricated components with threaded rods are easy to lift and insert, saving time and money. Works with slightly damaged threads and small burrs on the threaded rod. Opening mechanism is operated with pliers.
Lieske Part No.: 2068701

Spring steel, impact flange clamp for attaching threaded rods to a mild steel flange. Attaches to a 3-8mm flange and accepts an M8 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 314959

Spring steel, impact flange clamp for attaching threaded rods to a mild steel flange. Attaches to an 8-14mm flange and accepts an M8 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 945662

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 736646

Fastening threaded rods to horizontal structures such as laminated timber or concrete beams, joists, ceilings and walls.
Sales unit: 100 pieces
Lieske Part No.: 1317481

Simple knock-on flange clamp for securing threaded rods to a C-purlin structural member. Attaches to 1.5-4mm flanges, accepts M8 threaded rod.
Lieske Part No.: 1262626

Attachment to beams and C-roof purlins. Threaded rod support. Threaded rod hanger can be moved vertically downwards.
Sales unit: 100 pieces
Lieske Part No.: 1262641

Spring steel clip for fitting onto roof purlins, compensating the angle of the purlin. Provides a method for attaching threaded rods to roof purlins.
Lieske Part No.: 2068208

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 132657

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 356627

Fastening threaded rods to horizontal structures such as laminated timber or concrete beams, joists, ceilings and walls.
Sales unit: 100 pieces
Lieske Part No.: 1317482

Attachment to beams and C-roof purlins. Threaded rod support. Threaded rod hanger can be moved vertically downwards.
Sales unit: 100 pieces
Lieske Part No.: 1262640

Spring steel clip for fitting onto roof purlins, compensating the angle of the purlin. Provides a method for attaching threaded rods to roof purlins.
Sales unit: 100 pieces
Lieske Part No.: 1316719

Spring steel mount with push-in system that supports the conduit below or above the flange. 1/2¿ EMT or 18 to 22 mm conduit to 9/16¿-3/4¿ or 14 to 20 mm flange, mounting on the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 347348

Spring steel fastener with push-in system that supports the conduit below or above the flange. 3/4¿ EMT 1/2¿ or 22 to 30 mm conduit to 5/16¿-1/2¿ or 8 to 14 mm flange, mounting on the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 378702

Requires only a hammer for installation. Available for EMT, rigid, IMT and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 937134

Requires only a hammer for installation. Available for EMT, rigid, IMT and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 424806

Requires only a hammer for installation. Available for EMT, rigid, IMT and aluminum conduit. Rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1317407

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 575130

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 424854

Spring steel mount with push-in system that supports the conduit adjacent to the flange. 1/2¿ EMT or 18 to 22mm conduit to 5/16¿-1/2¿ or 8 to 14mm flange, side mount.
Sales unit: 100 pieces
Lieske Part No.: 334021

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 628231

Spring steel mount with push-in system that supports the conduit next to the flange. 3/4¿ EMT 1/2¿ rigid or 22 to 30mm conduit to 1/8¿ - 1/4¿ or 3 to 8mm flange, side mount.
Sales unit: 100 pieces
Lieske Part No.: 414921

Spring steel mount with push-in system that supports the conduit next to the flange. 3/4¿ EMT 1/2¿ rigid or 22 to 30 mm conduit to 5/16¿-1/2¿ or 8 to 14 mm flange, side mount.
Sales unit: 100 pieces
Lieske Part No.: 486476

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 795130

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 326584

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 404934

For attaching cable conduit to supports. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 295569

Spring steel fastening with push-in system that supports the cable conduit directly below or above the flange. 18 to 22 mm cable conduit on 8 to 14 mm flange, mounting on the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 837393

For attaching cable conduit to supports. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 509697

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 250 pieces
Lieske Part No.: 1427569

Pipe diameter 42-50 mm
Flange thickness: 3-8 mm

Type: 24M24SM
Package: 10 PCS.
Sales unit: 50 pieces
Lieske Part No.: 607606

CADDY 4G
6M clip ERICO zinc coating, painted white. Flange width 24-26 mm flange thickness
, 5 mm screw M 6 x 25 mm Type: 4G
6M25 sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 838789

For attaching cables to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1317406

Spring steel mount with cable tie base to secure cable parallel to support flange. Mounted on 8-12mm flange, cable tie not included.
Sales unit: 100 pieces
Lieske Part No.: 327370

Spring steel mount with cable tie base to secure cable parallel to support flange. Mounted on 12-20mm flange, cable tie not included.
Sales unit: 100 pieces
Lieske Part No.: 1427782

For attaching cables to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1263949

Quick and easy to install clip with retaining lips for a threaded pin attachment point in acoustic T-grid applications. For 24 mm T-grid with M6 x 7 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 405568

CADDY 4G
6M clip ERICO zinc coating, painted white. Flange width 24-26 mm flange thickness
, 5 mm screw M 6 x

mm Type: 4G
6M

Sales unit:
ST.
Lieske Part No.: 705763

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 1311232

Fast, easy and safe twist installation. No special tools required. To reduce scratches on grid ceiling profiles.
Sales unit: 100 pieces
Lieske Part No.: 802976

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 3-8 mm
load limit: 900 N Type: 4H24-2


Package: 10 PCS.
Sales unit: 100 pieces
Lieske Part No.: 271687

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 8-14 mm
Load limit: 900 N

Type: 2-4H58
Package: 10 PCS.
Lieske Part No.: 355447

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 14-20 mm
Load limit: 900 N

Type: 2-4H912
Quantity: 1 unit.

Please order in increments of 100 Packs
Sales unit: 100 pieces
Lieske Part No.: 489607

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 597065

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 575200

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 547508

Knock-on fastener for attaching device boxes, devices and other applications to support flanges. Stainless steel fastener, attaches to flanges from 3 to 8 mm, accepts M6 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 972872