Installation Material

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Lieske Part No.: 2068382

For attaching cables to support flanges. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 468715

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 8 pieces
Lieske Part No.: 2068383

Provides attachment for wire, nVent CADDY Speed Link or other assemblies to flanges and extrusions. Fits most beams. Installs easily with a hammer.
Sales unit: 10 pieces
Lieske Part No.: 1343685

Designed to accommodate an nVent CADDY Speed Link wire rope or hook.
Sales unit: 100 pieces
Lieske Part No.: 859036

Eyelet for the CADDY Speed Link wire hanging system for connection to the building. M8 thread, with an 8.5 mm through hole, compatible with the Speed Link hook end piece.
Sales unit: 100 pieces
Lieske Part No.: 781205

Designed to accommodate an nVent CADDY Speed Link wire rope or hook.
Sales unit: 100 pieces
Lieske Part No.: 961411

Spring steel cable fastener. For attaching electrical cables to nVent CADDY Speed Link steel cables.
Sales unit: 100 pieces
Lieske Part No.: 1261130

Spring steel cable fastener. For attaching electrical cables to nVent CADDY Speed Link steel cables.
Sales unit: 100 pieces
Lieske Part No.: 917750

For use in concrete and stone. Includes screw-in bit for easy installation.
Sales unit: 100 pieces
Lieske Part No.: 1313418

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is guided through openings.
Sales unit: 2 pieces
Lieske Part No.: 799527

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is guided through openings.
Sales unit: 2 pieces
Lieske Part No.: 968829

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is guided through openings.
Sales unit: 2 pieces
Lieske Part No.: 1311231

For mounting in simple through holes in a variety of components or devices. Ideal for lighting fixtures. The Y design increases stability.
Sales unit: 20 pieces
Lieske Part No.: 481536

Wire rope spools that allow installers to customize nVent CADDY Speed Link systems for each project. 300 meter spool with 1.5 mm steel rope.
Lieske Part No.: 1324308

Wire rope spools that allow installers to customize nVent CADDY Speed Link systems for each project. 300 meter spool of 2 mm wire rope.
Lieske Part No.: 1324124

Safe suspension for projectors, routers, etc.
Sales unit: 20 pieces
Lieske Part No.: 1324391

Easy to use stainless steel latch for wire rope suspension systems. Tool operated latch compatible with 1.5 gauge steel rope.
Sales unit: 200 pieces
Lieske Part No.: 926597

The double hook makes it easy to attach cable trays or lighting fixtures. The design allows a hook to be temporarily released to carry out maintenance work or to remove or add cables to a cable tray. The Y-design increases stability. The spring tab holds the rope securely in the hook.
Sales unit: 10 pieces
Lieske Part No.: 1324390

Drum with nVent CADDY Speed Link steel cable. Steel cable made of 7 bundles with 7 strands each consisting of aviation-grade wire.
Lieske Part No.: 1263167

Drum with nVent CADDY Speed Link steel cable. Steel cable made of 7 bundles with 7 strands each consisting of aviation-grade wire.
Lieske Part No.: 347472

Steel cable suspension with ultra-flat locking, ideal for attaching electrical boxes and lights. Hook end on one side, keyless flat M6 thread lock on the other side, 1m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 1324410

The system includes the steel cable with hook and the fastener. Ideal for hanging lighting fixtures, ventilation ducts and other installations. The small fastener is almost invisible. The fastener can be opened without tools and therefore allows for very easy adjustment.
Sales unit: 20 pieces
Lieske Part No.: 1324409

The system includes the steel cable with tilting element and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures. The small lock is almost invisible. The lock can be opened without tools and therefore allows very easy adjustment.
Sales unit: 20 pieces
Lieske Part No.: 1264258

Steel cable suspension kit consisting of a reel of steel wire and keyless locks. Reel of 50m of 1.5mm steel cable, packed with 25 keyless locks.
Lieske Part No.: 1340399

Der Satz umfasst eine Spule nVent CADDY Speed Link Light 1-mm-Drahtseil sowie 100 werkzeuglose Verschlüsse (10kg) mit ultraflachem Profil, was den Transport zur Baustelle vereinfacht und das Inventar verringert - 1mm Drahtseil.
Lieske Part No.: 1568814

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 20 pieces
Lieske Part No.: 2068323

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 20 pieces
Lieske Part No.: 2068324

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Lieske Part No.: 2068325

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 20 pieces
Lieske Part No.: 1325665

Versatile, height adjustable suspension for quick installation on various metal structures. Ceiling hook end piece on one side, keyless locking on the other side, 3m length, 1.5mm cable.
Lieske Part No.: 1325465

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Quick and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and hold it there securely. The design reliably protects the cable from damage caused by sharp sheet metal edges.
Sales unit: 20 pieces
Lieske Part No.: 1325478

The system includes the steel cable, the lock and the pre-assembled nVent CADDY spring steel clamp. Is easily installed with a hammer. Fits most carriers.
Sales unit: 20 pieces
Lieske Part No.: 1261575

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 1m length, 1.5mm cable.
Lieske Part No.: 872893

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 2m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 872873

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 3m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 872872

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 5m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 873304

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 20 pieces
Lieske Part No.: 873301

Versatile, height-adjustable suspension for quick installation on various building elements. Loop end piece on one side, keyless locking on the other side, 2 m length, 1.5 mm cable.
Sales unit: 20 pieces
Lieske Part No.: 298442

Versatile, height-adjustable suspension for quick installation on various building elements. Loop end piece on one side, keyless locking on the other side, 3 m length, 1.5 mm cable.
Sales unit: 20 pieces
Lieske Part No.: 1325640

Versatile, height-adjustable suspension for quick installation on various building elements. Loop end piece on one side, keyless locking on the other side, 5 m length, 1.5 mm cable.
Sales unit: 20 pieces
Lieske Part No.: 1325639

The system includes the steel cable with tilting element and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures. Also available in Y configuration.
Sales unit: 20 pieces
Lieske Part No.: 873278

Versatile, height adjustable suspension for quick installation of various luminaires and low voltage equipment. Tilting element end piece on one side, keyless locking on the other side, 2m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 873277

Versatile, height adjustable suspension for quick installation of various luminaires and low voltage equipment. Tilting element end piece on one side, keyless locking on the other side, 3m length, 1.5mm cable.
Lieske Part No.: 298443

Versatile, height adjustable suspension for quick installation of various luminaires and low voltage equipment. Tilting element end piece on one side, keyless locking on the other side, 5m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 873274

The system includes the steel cable with tilting element and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures. Also available in Y configuration.
Sales unit: 20 pieces
Lieske Part No.: 1261579

Versatile, height adjustable suspension for quick installation on various metal structures. Ceiling hook end piece on one side, keyless locking on the other side, 3m length, 2mm cable.
Sales unit: 10 pieces
Lieske Part No.: 1325477

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Quick and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and hold it there securely. The design reliably protects the cable from damage caused by sharp sheet metal edges.
Sales unit: 10 pieces
Lieske Part No.: 1325476

The system includes the steel cable, the lock and the pre-assembled nVent CADDY spring steel clamp. Is easily installed with a hammer. Fits most carriers.
Sales unit: 10 pieces
Lieske Part No.: 1261580

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 1m length, 2mm cable.
Sales unit: 10 pieces
Lieske Part No.: 873297