Installation Material

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical applications include pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 50 meters
Lieske Part No.: 1316306

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical applications include pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 776641

Die Warmschrumpfschläuche vom Typ SR3 sind dickwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Druck- und Feuchtigkeitsschutz von Kabeln sowie die Verwendung in Schrumpfmuffen und Schrumpfendverschlüssen.
Lieske Part No.: 1276600

The heat shrink tubing type SR3 is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 918263

The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 803956

2 medium wall heat shrink tubing type SRH Offer ideal of power engineering for electrical insulation, pressure and moisture-proof coating, eg joints, length
mm. VE:
m =
St. x
m,
m =
St. x
m Wall thickness: 3,
mm before / after shrinking:
6/4 mm Type: SRH3
6-4 /

ST.
Sales unit: 20 pieces
Lieske Part No.: 729077

Shielded connecting cables are used to create earth connections in cable network construction.
Lieske Part No.: 391930

Shielded connecting cables are used to create earth connections in cable network construction.
Lieske Part No.: 528211

Centering aid as insulation, for protection and easy assembly, easy separation and positioning.
Lieske Part No.: 1316167

Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 20 pieces
Lieske Part No.: 480905

Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 962131

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 751572

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 377955

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 930996

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 132650

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 944223

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 710068

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 852811

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 737009

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 557415

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 514949

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 204687

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 979636

Zur Reparatur von Mantelschäden aller kunststoff- und gummiisolierten Kabel und Leitungen.
Lieske Part No.: 1275937

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 718439

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 699125

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 914070

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 891051

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 508250

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 152716

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 298709

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 806247

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 1315398

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 860855

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 1578751

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 575086

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 310049

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 718672

The heat shrink tubing type SRH2 is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 514984

The heat shrink tubing type SRH2 is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 562933

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 100 meters
Lieske Part No.: 490879

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 1316304

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490882

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490881

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962944

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962854

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490888

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490887

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490892

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 25 meters
Lieske Part No.: 490848