Installation Material

4-wire initiator terminal, yellow LED, for NPN (minus) switching initiators, with PE via push-in jumper, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948524

4-wire initiator terminal, yellow LED, for PNP (plus) switching initiators, with PE via push-in jumper, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948525

4-wire initiator terminal, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 385943

4-wire initiator terminal, yellow LED, for NPN (minus) switching initiators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 350261

4-wire initiator terminal, yellow LED, for PNP (plus) switching initiators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 350260

4-wire initiator feed terminal, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 378335

4-wire initiator feed terminal, green LED, for PNP (plus) switching initiators, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
Twice the pitch width of this terminal family allows you to connect e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 348009

4-wire initiator feed terminal, with PE connection, internal bridging,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 348055

4-wire initiator feed terminal, green LED, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 378933

Blind module, can be connected in series, for skipping bridged terminals, for example, grey
Sales unit: 25 pieces
Lieske Part No.: 1949626

End and intermediate plate 1mm thick for 4-wire terminals gray
Sales unit: 25 pieces
Lieske Part No.: 386721

Modular TOPJOB®S connector, stackable, for jumper slots, 2-pin, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1352378

Modular TOPJOB®S connector, stackable, for jumper slots, 3-pin, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1352377

Modular TOPJOB®S connector, stackable, for jumper slots, 4-pin, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1949619

Modular TOPJOB®S connector, stackable, for jumper slots, 5-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949620

Modular TOPJOB®S connector, stackable, for jumper slots, 6-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949621

Modular TOPJOB®S connector, stackable, for jumper slots, 7-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949622

Modular TOPJOB®S connector, stackable, for jumper slots, 8-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949623

Modular TOPJOB®S connector, stackable, for jumper slots, 9-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949624

Modular TOPJOB®S connector, stackable, for jumper slots, 10-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949625

2-wire feed-through terminal suitable for Ex e II applications grey
Lieske Part No.: 337748

2-wire feed-through terminal suitable for Ex e II applications orange
Sales unit: 100 pieces
Lieske Part No.: 773976

2-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 949764

2-wire feed-through terminal suitable for Ex e II applications suitable for Ex i applications blue
Lieske Part No.: 150674

2-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 1960308

2-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 1960309

2-wire protective conductor terminal suitable for Ex e II applications green-yellow
Lieske Part No.: 373700

2-conductor shield terminal, 1.5 mm², side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², white
Sales unit: 100 pieces
Lieske Part No.: 1948490

2-wire diode terminal with diode 1N4007 grey
Sales unit: 100 pieces
Lieske Part No.: 909913

Component terminal, 2 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², Push-in CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1967599

3-wire feed-through terminal suitable for Ex e II applications grey
Lieske Part No.: 850309

3-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 673620

3-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 1960310

3-wire feed-through terminal suitable for Ex e II applications suitable for Ex i applications blue
Sales unit: 100 pieces
Lieske Part No.: 773760

3-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 1960311

3-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 1237685

3-wire protective conductor terminal suitable for Ex e II applications green-yellow
Sales unit: 100 pieces
Lieske Part No.: 647145

3-conductor shield terminal, 1.5 mm², side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², white
Sales unit: 100 pieces
Lieske Part No.: 1948508

Component terminal, 3 conductors, with diode 1N4007, anode left, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², Push-in CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 909914

Component terminal, 3 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², Push-in CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1242166

Component terminal, 3 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², Push-in CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1967600

Component terminal, 3 conductors, red LED, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 1.5 mm², Push-in CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 1967601

4-wire feed-through terminal suitable for Ex e II applications grey
Sales unit: 100 pieces
Lieske Part No.: 112589

4-conductor feed-through terminal 1.5 mm² suitable for Ex e II applications side and center labeling for mounting rail 35 x 15 and 35 x 7.5 Push-in CAGE CLAMP® orange
Sales unit: 100 pieces
Lieske Part No.: 391821

4-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 949767

4-conductor feed-through terminal 1.5 mm² suitable for Ex e II and Ex i applications, side and center labeling for mounting rail 35 x 15 and 35 x 7.5 Push-in CAGE CLAMP® blue
Sales unit: 100 pieces
Lieske Part No.: 203223

4-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 949768

4-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 1237684

4-conductor protective conductor terminal 1.5 mm² suitable for Ex e II applications side and center labeling for mounting rail 35 x 15 and 35 x 7.5 Push-in CAGE CLAMP® green-yellow
Sales unit: 100 pieces
Lieske Part No.: 887172

4-conductor shield terminal, 1.5 mm², side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², white
Sales unit: 100 pieces
Lieske Part No.: 1960654