Installation Material

Component terminal, double-deck, with 2 diodes 1N4007, anodes below, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1967403

Component terminal, double-deck, with 2 diodes 1N4007, anodes at the top, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1243110

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 908646

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 1967404

Component terminal, double-deck, with 2 diodes 1N4007, anode top, anode right, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 828237

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 908647

Double-deck terminal protective conductor/through terminal PE/N without label carrier for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² Push-in CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 578124

Double-deck terminal, protective conductor/through terminal, with end plate, 2.5 mm², PE/N, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945676

Double-deck terminal, shield conductor/through terminal, 2.5 mm², shield/N, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1961202

Double-deck terminal, shield conductor/through terminal, with end plate, 2.5 mm², shield/N, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945690

Component terminal, double-deck, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1967405

Component terminal, double-deck, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1243109

Double-deck terminal protective conductor/through terminal PE/L without label carrier for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² Push-in CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 149847

Double-deck terminal, protective conductor/through terminal, with end plate, 2.5 mm², PE/L, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945675

Double-deck terminal, shield conductor/through terminal, 2.5 mm², shield/L, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945688

Double-deck terminal, shield conductor/through terminal, with end plate, 2.5 mm², shield/L, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945689

Double-deck terminal Feed-through/feed-through terminal L/L with label carrier Housing colour grey Suitable for applications Ex e II grey
Lieske Part No.: 615228

Double-deck terminal, feed-through/feed-through terminal, with end plate, L/L, with label holder, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1586268

Double-deck terminal, feed-through/feed-through terminal, N/L, with label holder, suitable for Ex e II applications, conductor entry EG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 111597

Double-deck terminal, feed-through/feed-through terminal, with end plate, N/L, with label holder, conductor entry EG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945673

Double-deck terminal Feed-through/feed-through terminal L/N with label carrier Housing colour grey Suitable for applications Ex e II grey
Sales unit: 50 pieces
Lieske Part No.: 1216787

Double-deck terminal, feed-through/feed-through terminal, with end plate, L/N, with label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945670

Double-deck terminal Feed-through/feed-through terminal N/N with label carrier Housing colour blue Suitable for applications Ex e II Suitable for applications Ex i Blue
Sales unit: 50 pieces
Lieske Part No.: 111602

Double-deck terminal, feed-through/feed-through terminal, with end plate, N/N, with label holder, suitable for Ex i applications, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1945674

Double-deck terminal 4-conductor protective conductor terminal PE with label carrier Housing color green-yellow internally bridged for applications Ex e II suitable green-yellow
Lieske Part No.: 911801

Double-deck terminal, 4-conductor protective conductor terminal, with end plate, 2.5 mm², PE, with label carrier, internally bridged, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 213463

Double-deck terminal block 4-conductor feed-through terminal block L with label carrier Housing color gray internally bridged Conductor entry violet printed Suitable for applications Ex e II gray
Lieske Part No.: 419099

Double-deck terminal, 4-conductor feed-through terminal, with end plate, L, with label carrier, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945667

Double-deck terminal block 4-conductor feed-through terminal block N with label carrier Housing color blue internally bridged Conductor entry violet printed Suitable for applications Ex e II Suitable for applications Ex i Blue
Sales unit: 50 pieces
Lieske Part No.: 914540

Double-deck terminal, 4-conductor feed-through terminal, with end plate, N, with label carrier, suitable for Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1945671

Double-deck terminal, protective conductor/through terminal, 2.5 mm², PE/N, suitable for Ex e II applications, with label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 897855

Double-deck terminal, protective conductor/through terminal, with end plate, 2.5 mm², PE/N, with label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945677

Double-deck terminal, shield conductor/through terminal, 2.5 mm², shield/N, with label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1961673

Double-deck terminal, shield conductor/through terminal, with end plate, 2.5 mm², shield/N, with label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945693

Double-deck terminal Protective conductor/through terminal PE/L with label carrier Housing colour grey suitable for applications Ex e II grey
Sales unit: 50 pieces
Lieske Part No.: 112006

Double-deck terminal, protective conductor/through terminal, with end plate, 2.5 mm², PE/L, with label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1328611

Double-deck terminal, shield conductor/through terminal, 2.5 mm², shield/L, with label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1960672

Double-deck terminal, shield conductor/through terminal, with end plate, 2.5 mm², shield/L, with label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945694

End and intermediate plate 0.8 mm thick grey
Lieske Part No.: 883022

End and intermediate plate 0.8 mm thick orange
Lieske Part No.: 132315

Partition wall, upper floor protruding, snap-on, 2 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 1587471

Partition wall, upper floor protruding, snap-on, 2 mm thick, orange
Sales unit: 25 pieces
Lieske Part No.: 1949773

4-conductor double-deck terminal block Feed-through/feed-through terminal block L/L without label holder Housing colour grey grey
Sales unit: 50 pieces
Lieske Part No.: 906368

4-conductor double-deck terminal block Feed-through/feed-through terminal block N/L without label holder Housing colour grey grey
Sales unit: 50 pieces
Lieske Part No.: 348548

4-conductor double-deck terminal, feed-through/feed-through terminal, L/N, without label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1967530

4-conductor double-deck terminal block Feed-through/feed-through terminal block N/N without label carrier Housing colour blue Suitable for Ex i applications blue
Sales unit: 50 pieces
Lieske Part No.: 853689

4-conductor double-deck terminal 8-conductor protective conductor terminal PE without label carrier Housing colour green-yellow internally bridged green-yellow
Lieske Part No.: 906375

4-conductor double-deck terminal, 8-conductor through-terminal, L, without label carrier, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 503730

4-conductor double-deck terminal, 8-conductor feed-through terminal, N, without label carrier, suitable for Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1967531

4-conductor double-deck terminal, protective conductor/through terminal, 2.5 mm², PE/N, without label holder, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1564603