Installation Material

Bridge, 6-way, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928191

Brücker, 6-fach, isoliert, rot
Sales unit: 25 pieces
Lieske Part No.: 303436

Brücker, 6-fach, isoliert, blau
Sales unit: 25 pieces
Lieske Part No.: 335198

Triangle jumper, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 949762

Bridge, 7-way, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928204

Brücker, 7-fach, isoliert, rot
Sales unit: 25 pieces
Lieske Part No.: 303421

Kammbrücker isoliert 7-fach Nennstrom 14 A

Sales unit: 25 pieces
Lieske Part No.: 303990

Bridge, 8-way, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928220

Brücker, 8-fach, isoliert, rot
Sales unit: 25 pieces
Lieske Part No.: 303417

Brücker, 8-fach, isoliert, blau
Sales unit: 25 pieces
Lieske Part No.: 335213

Bridge, 9-way, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928252

Brücker, 9-fach, isoliert, rot
Sales unit: 25 pieces
Lieske Part No.: 303369

Brücker, 9-fach, isoliert, blau
Sales unit: 25 pieces
Lieske Part No.: 303900

Bridge, 10-way, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 297992

Brücker, 10-fach, isoliert, rot
Sales unit: 25 pieces
Lieske Part No.: 303810

Brücker, 10-fach, isoliert, blau
Sales unit: 25 pieces
Lieske Part No.: 304497

Bridge, from 1 to 3, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928337

Jumper, from 1 to 3, isolated, red
Sales unit: 25 pieces
Lieske Part No.: 1947725

Bridge, from 1 to 3, isolated, blue
Sales unit: 25 pieces
Lieske Part No.: 1872458

Brücker, von 1 auf 4, isoliert, lichtgrau
Sales unit: 25 pieces
Lieske Part No.: 242586

Bridge, from 1 to 5, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928343

Brücker, von 1 auf 6, isoliert, lichtgrau
Sales unit: 25 pieces
Lieske Part No.: 240000

Brücker, von 1 auf 7, isoliert, lichtgrau
Sales unit: 25 pieces
Lieske Part No.: 242699

Bridge, from 1 to 8, insulated, light grey
Sales unit: 25 pieces
Lieske Part No.: 928436

Brücker, von 1 auf 9, isoliert, lichtgrau
Sales unit: 25 pieces
Lieske Part No.: 535579

Brücker, von 1 auf 10, isoliert, lichtgrau
Sales unit: 25 pieces
Lieske Part No.: 401010

Vertical jumper, insulated, light grey
Lieske Part No.: 1133764

TOPJOB®SL test plug module, stackable, for jumper slots, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1352071

TOPJOB®SL test plug module, stackable, for jumper slots, 1-pole, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1949772

3-wire actuator terminal, for NPN (minus) switching actuators, with PE via comb jumper,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 386626

3-conductor actuator terminal, for PNP (plus) switching actuators, with PE via push-in jumper bar, with color-printed conductor entries, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 1948500

3-wire actuator terminal, yellow LED, for NPN (minus) switching actuators, with PE via comb jumper,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 347839

3-wire actuator terminal, yellow LED, for PNP (plus) switching actuators, with PE via push-in jumper bar, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948503

Pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 347100

3-wire initiator terminal, yellow LED, for NPN (minus) switching initiators,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal
Sales unit: 50 pieces
Lieske Part No.: 347862

3-wire initiator terminal, yellow LED, for PNP (plus) switching initiators,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 347874

3-conductor actuator terminal, for NPN (minus) switching actuators, with PE connection, with color-printed conductor entries, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 1948499

3-wire actuator terminal, for PNP (plus) switching actuators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 387816

3-wire actuator terminal, yellow LED, for NPN (minus) switching actuators, with PE connection, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948502

3-wire actuator terminal, yellow LED, for PNP (plus) switching actuators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 350491

3-wire initiator feed terminal, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 348063

3-wire initiator feed terminal, green LED, for PNP (plus) switching initiators, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 374460

3-wire actuator feed terminal, for NPN (minus) switching actuators, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables connection from Z. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 348057

3-wire actuator feed terminal, for PNP (plus) switching actuators, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables connection from Z. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 378127

3-wire initiator feed terminal, internal bridging,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 377515

3-wire initiator feed terminal, LED green,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 349941

3-wire actuator feed terminal, for NPN (minus) switching actuators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 378629

3-wire actuator feed terminal, for PNP (plus) switching actuators, with PE connection, internal bridging,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.

Sales unit: 15 pieces
Lieske Part No.: 376401

End and intermediate plate 1 mm thick for 3-wire terminals, gray
Sales unit: 25 pieces
Lieske Part No.: 386434

4-wire initiator terminal, with PE via comb jumper,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 385948