Installation Material

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680075

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 2062605

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680156

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680155

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680152

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680073

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680164

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680162

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680160

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680159

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 50 pieces
Lieske Part No.: 2121673

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 2121672

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 680163

The Bind-It fabric hose in flame-retardant design ensures excellent mechanical protection of wire and cable bundles and is also highly wear-resistant. Its design ensures 100% sheathing of the cables, which allows branches and subsequent installation. The Bind-It is ideal for applications in electrical engineering (e.g. switchgear), the automotive industry, mechanical and plant engineering, the marine industry, the railway industry and the electronics industry. In addition, the hose ends do not fray when cut to length and therefore do not need to be heat-welded. The practical roll design means that the protective hose can also be used on cables that have already been connected. The powerful Bind-It is a longitudinally slit, self-wrapping hose that is quick and easy to install and remove. The ends can be fastened and secured with our reliable Ty-Rap cable ties.
Lieske Part No.: 300099

Der Bind-It Gewebeschlauch in flammwidriger Ausführung gewährleistet einen exzellenten mechanischen Schutz von Draht- und Kabelbündeln und weist darüber hinaus eine hohe Verschleißfestigkeit auf. Durch seine Konstruktion wird eine 100%ige Ummantelung der Kabel erzielt, diese erlaubt Abzweigungen und eine nachträgliche Installation. Der Bind-It ist hervorragend geeignet für Anwendungen in der Elektrotechnik (z.B. Schaltanlagen), Automobilindustrie, im Maschinen- und Anlagenbau, bei der Marine, der Bahn und in der elektronischen Industrie. Zudem fasern die Schlauchenden beim Ablängen nicht aus und müssen daher auch nicht heißverschweißt werden. Durch das praktische Rolldesign kann der Schutzschlauch auch bei bereits angeschlossenen Kabeln eingesetzt werden. Der leistungsstarke Bind-It ist ein längs geschlitzter, selbstumwickelnder Schlauch, der schnell und einfach zu installieren und auch wieder zu entfernen ist. Die Enden können mit unseren zuverlässigen Ty-Rap Kabelbindern befestigt und gesichert werden. Verkaufseinheit: 1 ST.
Lieske Part No.: 1247737

The Bind-It fabric hose in flame-retardant design ensures excellent mechanical protection of wire and cable bundles and is also highly wear-resistant. Its design ensures 100% sheathing of the cables, which allows branches and subsequent installation. The Bind-It is ideal for applications in electrical engineering (e.g. switchgear), the automotive industry, mechanical and plant engineering, the marine industry, the railway industry and the electronics industry. In addition, the hose ends do not fray when cut to length and therefore do not need to be heat-welded. The practical roll design means that the protective hose can also be used on cables that have already been connected. The powerful Bind-It is a longitudinally slit, self-wrapping hose that is quick and easy to install and remove. The ends can be fastened and secured with our reliable Ty-Rap cable ties.
Lieske Part No.: 300100

The very flexible polyester cable protection braid from ABB is ideal for bundling and protecting cables and lines. It provides excellent protection against abrasion and excessive wear. The closed hose is very stretchy, halogen-free and has good chemical resistance. To prevent the braided hose end from fraying when cutting to length, a hot cutting tool is recommended (see product no.: WT-HSG).
Lieske Part No.: 319778

The Bind-It fabric sleeve is a robust but lightweight sleeve that is used to bundle and mechanically protect cables and wires from abrasion and sharp edges. In addition, the sleeve ends do not fray when cut to length and therefore do not need to be heat-welded. The practical roll design means that the protective sleeve can also be used on cables that have already been connected. The powerful Bind-It is a longitudinally slit, self-wrapping sleeve that is quick and easy to install and remove. The ends can be fastened and secured with our reliable Ty-Rap cable ties.
Lieske Part No.: 303600

The Bind-It fabric hose in flame-retardant design ensures excellent mechanical protection of wire and cable bundles and is also highly wear-resistant. Its design ensures 100% sheathing of the cables, which allows branches and subsequent installation. The Bind-It is ideal for applications in electrical engineering (e.g. switchgear), the automotive industry, mechanical and plant engineering, the marine industry, the railway industry and the electronics industry. In addition, the hose ends do not fray when cut to length and therefore do not need to be heat-welded. The practical roll design means that the protective hose can also be used on cables that have already been connected. The powerful Bind-It is a longitudinally slit, self-wrapping hose that is quick and easy to install and remove. The ends can be fastened and secured with our reliable Ty-Rap cable ties.
Lieske Part No.: 1936341

The very flexible polyester cable protection braid from ABB is ideal for bundling and protecting cables and lines. It provides excellent protection against abrasion and excessive wear. The closed hose is very stretchy, halogen-free and has good chemical resistance. To prevent the braided hose end from fraying when cutting to length, a hot cutting tool is recommended (see product no.: WT-HSG).
Lieske Part No.: 319772

Direct connection V-terminal 240mm² se, for AL + CU conductor 35-185mm² sm
Lieske Part No.: 135268

Labeling strip set, self-adhesive plastic strips and A4 paper labeling sheet for inserting into plastic strips, width 215mm, set of 9 pieces
Lieske Part No.: 560036

Cable house connection box K12,1x3xNH2/1
Lieske Part No.: 483950

UP-frame wall frame for K3/K4, prepared for profile half cylinder
Lieske Part No.: 829720

Cable house connection box K12,2x3xNH00,2x50-185mm²,2x100A
Lieske Part No.: 253661

Insulating hose PVC for data cable to APL, protective hose, +90°C to -40°C, black, 12mm
Lieske Part No.: 585646

ZAS/STAS accessories, hood IP54 with door for 450mm h
Lieske Part No.: 275031

Verbindungsschienensatz für Parallelbetrieb von 2xNH1-NH3 inkl,Anschlussgarnitur,Verbindungsschienensatz, Verkaufseinheit: 1 ST.
Lieske Part No.: 686750

Verbindungsschienensatz,3-polig,Cu 30 x10 von LSS 800A,auf 185mm Sammelschiene,Verbindungsschienensatz Verkaufseinheit: 1 ST.
Lieske Part No.: 686749

Lieske Part No.: 303862

POWER FRAME installation frame 3-way, for installation in worktops, housing made of powder-coated sheet steel, color: white aluminum, RAL 9006, holder for socket insert, individually packed in a polybag. Please refer to the installation instructions at: www.bachmann.com/de/downloads for the dimensions.
Lieske Part No.: 769453

Ceramic socket terminal up to 4mm² 2-pole Non-flammable, temperature-resistant Dimensionally stable up to approx. 1000°C (Ceramic only) Steatite unglazed C220, IEC 672-1 With mounting hole in the middle Color: Light beige Continuous use temperature: max. 200°C Rated insulation voltage: 450V Test current: 32A Clamping range 2.5-10mm², hole diameter approx. 4.2mm Clamp body: Brass, galvanically refined Screws: Steel, galvanically refined Screws are fully screwed in, M3.5 LxWxH: approx. 24x21.2x19.8mm
Lieske Part No.: 677031

Our short-circuit-proof, single-phase, extra-narrow power supplies are approved according to CE/TÜV. The power supplies support predictive maintenance in the sense of Industry 4.0: The IO-Link interface enables all parameters to be integrated into the overall system diagnostics. Features: DIN rail mounting, adjustable output voltage from 24 V, output power 60 to 480 W, IP20, HEARTBEAT® - status display. Dimensions=116 x 70 x 150 mm, design=IP67, mounting=flange mounting, housing material=aluminum, connection (power supply IN)=7/8' plug, connection (power supply OUT)=7/8' socket, input voltage=100.240 V AC, single-phase, nominal output voltage DC=24 V, nominal output current=8 A, output power max.=192 W, output current max.=12 A for max. 4 s, protection class=IP67 with connector, approval/conformity=CEcURusWEEE, ambient temperature=-25...70 °C
Lieske Part No.: 992762

Functional principle = general electronic tool, design = sensor tester, connection = terminal connection, housing material = plastic, use = 3-wire sensor DC PNP/NPN
Lieske Part No.: 2070566

Our universal mounting system consists of the components base holder, mounting rods, cross connectors and joint pieces. Balluff offers a wide selection of sensor and reflector holders. You can choose between different materials such as POM, Al anodized, GD-Zn chrome-plated and stainless steel. The mounting system is flexible and robust as well as easy to install. Functional principle=mounting system, use=for optoelectronic sensors BOS 21Mfor reflectors BOS R-9, material=stainless steel, dimensions=61.5 x 34 x 59 mm, fastening=clamps
Lieske Part No.: 536531

Our sensor holders can be combined with the BMS mounting system. The high-quality sensor holders are designed and tested for Balluff magnetic field sensors. They are characterized by precision and durability. Functional principle=BMF mounting bracket, application=pneumatic cylinder with integrated groove, use=for magnetic field sensors BMF 305, material=anodized aluminum, ambient temperature=-40...85 °C
Lieske Part No.: 393104

The right reflector for every environment: Our round and cuboid reflectors and reflective foils are heat and chemical resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors are ideal for applications with BOS sensors. You can choose between different sizes and mounting options. Design=cube corner 1.2 mm, use=for optoelectronic reflective light barriersfor optoelectronic laser reflective light barriers, shape=cube2 mounting holes, dimensions=51 x 61 x 7.5 mm, active area=22.6 cm², ambient temperature=-20...60 °C, active area, material=PMMA, material=ABS, light type=unpolarized light, also for polarized light, mounting=adhesive screw M4
Lieske Part No.: 983982

The right reflector for every environment: Our round and cuboid reflectors and reflective foils are heat and chemical resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors are ideal for applications with BOS sensors. You can choose between different sizes and mounting options. Design=cube corner 4 mm, use=for optoelectronic reflective light barriers, shape=cube2 mounting holes, dimensions=19 x 60 x 6.1 mm, active area=4.9 cm², ambient temperature=-20...60 °C, active area, material=PMMA, material=ABS, light type=unpolarized light, also for polarized light, mounting=adhesive screw M4
Lieske Part No.: 983997

Our universal mounting system consists of the components base holder, mounting rods, cross connectors and joint pieces. Balluff offers a wide selection of sensor and reflector holders. You can choose between different materials such as POM, anodized aluminum, chrome-plated GD-Zn and stainless steel. The mounting system is flexible and robust as well as easy to install. Functional principle=mounting system, use=for mounting systems BMS for holding rods with Ø12 mm, material=chrome-plated zinc, matt, dimensions=60 x 30 x 36 mm, fastening=screws, clamps
Lieske Part No.: 620402

Functional principle=clamp holder, use=for capacitive sensors BCS R08, material=PP, dimensions=22 x 10 x 35 mm, fastening=screws, clamps, ambient temperature=-25...85 °C
Lieske Part No.: 2079494

Our brackets for our SmartLight signal lights and displays offer positioning and fastening in one. They are characterized by easy installation and a robust construction. The high-quality brackets are designed and tested for Balluff devices. You can combine the brackets for human machine interfaces with the BMS mounting system. Functional principle=SmartLight bracket, Use=for SmartLight signal light, Material=anodized aluminum, natural, Dimensions=Ø 70 x 250 mm, Fastening=screws
Lieske Part No.: 2070482

Our brackets for our SmartLight signal lights and displays offer positioning and fastening in one. They are characterized by easy installation and a robust construction. The high-quality brackets are designed and tested for Balluff devices. You can combine the brackets for human machine interfaces with the BMS mounting system. Functional principle=SmartLight bracket, Use=for Smartlight indicator, Material=anodized aluminum, natural, Dimensions=Ø 70 x 100 mm, Fastening=M5 screw
Lieske Part No.: 2070480

Our brackets for our SmartLight signal lights and displays offer positioning and fastening in one. They are characterized by easy installation and a robust construction. The high-quality brackets are designed and tested for Balluff devices. You can combine the brackets for human machine interfaces with the BMS mounting system. Functional principle=SmartLight bracket, Use=for SmartLight signal light, Material=anodized aluminum, natural, Dimensions=Ø 70 x 38 mm, Fastening=screws, clamps
Lieske Part No.: 2070485

Our sensor holders can be combined with the BMS mounting system. The high-quality sensor holders are designed and tested for Balluff magnetic field sensors. They are characterized by precision and durability. Functional principle=Adapter BMP, Application=Holder for round cylinders from Ø 10 mm, Use=for magnetic field position measuring system BMP, Material=PP
Lieske Part No.: 2070477

Our high-pressure-resistant inductive sensors can withstand a pressure of up to 500 bar. They are therefore perfect for monitoring the position of your hydraulics, such as for the end position control on hydraulic cylinders or the monitoring of valve positions. Inductive sensor, Ø 12 x 56 mm, connector, normally open (NO), nominal switching distance Sn=1.5 mm, flush, 500 bar, oil pressure-resistant, housing material=stainless steel, active surface, material=ceramic
Lieske Part No.: 981933

Magnetic field sensor, connection type 01=cable with connector, switching output 01=PNP, switching function 01=normally open (NO), housing material primary=LCP, protection class=IP67, fastening=mounting bracket BMF 303-HW*, application=particularly suitable for short-stroke cylinders due to optimized response path.
Lieske Part No.: 499107

Mechanical position switches are the classics in automation. The switching process is carried out by a telescopic plunger. This plunger is used to switch a mechanical switching element in a separate, sealed chamber. The optimal choice of plunger shape for the application in combination with our cams guarantees a long service life. Continuous current=1st switching point: 6.0 A, connection type=1st switching point: screw connection, ambient temperature=-5...80 °C, approval/conformity=CECSAWEEE
Lieske Part No.: 950120

Functional principle=switchgear, component=mechanical switchgear, design=safety DIN EN 60204-1, dimensions=185 x 140 x 187 mm, housing material=aluminum, switching element=1-6. Switching point: BSE 61, contact material=1-6. Switching point: fine silver, cable bushings, number=4 threaded outputs M25, cam rings=1-6. Switching point: 180°, drive type=right, max. speed=200 rpm, speed monitoring=without switching point loss, rated operating voltage Ue=1-6. Switching point: 250 V AC, continuous current=1-6. Switching point: 6 A, ambient temperature=-5...80 °C, approval/conformity=CEBGWEEE
Lieske Part No.: 950161

BEGA pipe clamp 70280A with G½ connection thread. For mounting spotlights with G½ connection thread on on-site structures. Pipe clamp is made of cast aluminum and stainless steel. Color graphite. 5 m connection cable with safety plug. Clamping range 30 - 80 mm.
Lieske Part No.: 613823

Blind module, accessories, polar white. 1-way blind module for support plates for MINI-COM modules.
Lieske Part No.: 996681