Installation Material

Styrene-free vinyl ester composite mortar for expansion-free anchoring of high loads with threaded anchor rods. Coaxial cartridge including 1 mixing tube, to be applied with dispensing gun type VM-P 380 Profi.
European technical approval for cracked and non-cracked concrete, as well as masonry made of solid and perforated bricks. Earthquake-proof in concrete according to category C1. Fire protection approval for concrete and masonry with fire resistance classes up to 120 minutes.
Substrate temperature during application -10°C to +40°C (concrete), ambient temperature after complete hardening -40°C to +120°C (in concrete). Shelf life at least 18 months when stored in a dark, cool and dry place.
Lieske Part No.: 1044250

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044251

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Lieske Part No.: 1350014

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 104426

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044260

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 2014089

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044261

Mit der Ankerstange und dazu passender Kunststoff-Siebhülse werden Lasten, in Verbindung mit dem Injektionsmörtel VMU plus, spreizdruckfrei an Wänden aus Mauerwerk befestigt. Das System wird auch zur Befestigung in Decken aus Beton angewendet. An Wänden aus Beton und Vollstein wird die Ankerstange nur mit dem Injektionsmörtel VMU plus montiert, ohne Siebhülse.
Sales unit: 10 pieces
Lieske Part No.: 2144648

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 1044262

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Lieske Part No.: 1044263

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 1350012

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 2014090

Self-tapping screw for fixing the metal fire protection ducts and all molded parts to the supports during suspended installation.
Sales unit: 100 pieces
Lieske Part No.: 339283

Screw with special milling ribs for fire protection duct PYROLINE® Con D and PYROLINE® Con S, for fastening cable clamps in the duct. Required plate thickness at least 20 mm.
Sales unit: 100 pieces
Lieske Part No.: 826603

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With round head for universal fastenings. Torx drive T30.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Lieske Part No.: 1101391

Schraubanker zur direkten Montage ohne Dübel in gerissenem und ungerissenem Beton sowie Mauerwerk. Mit Rundkopf für universelle Befestigungen. Torx-Antrieb T30.
Gemäß EAD geprüftes, CE-gekennzeichnetes Bauprodukt mit Europäisch Technischer Bewertung (ETA) und Anwendbarkeitsnachweis. Tragfähigkeiten unter Brandbelastung bis zur Feuerwiderstandsklasse R120 nachgewiesen.
Sales unit: 100 pieces
Lieske Part No.: 539676

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With hexagon drive and pressed-on disc for supporting large loads. Suitable for fastening hanging supports and wall brackets.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Lieske Part No.: 1343504

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 200 pieces
Lieske Part No.: 1352446

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 100 pieces
Lieske Part No.: 1426210

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 100 pieces
Lieske Part No.: 1031814

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 100 pieces
Lieske Part No.: 1031815

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 50 pieces
Lieske Part No.: 1426211

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 50 pieces
Lieske Part No.: 1031830

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Lieske Part No.: 1441733

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 50 pieces
Lieske Part No.: 1032118

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With hexagon drive and pressed-on disc for supporting large loads. Suitable for fastening hanging supports and wall brackets.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 25 pieces
Lieske Part No.: 1343496

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With countersunk head for universal fastenings. Torx drive T40.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 50 pieces
Lieske Part No.: 1101392

Schraubanker zur direkten Montage ohne Dübel in gerissenem und ungerissenem Beton sowie Mauerwerk. Mit Sechskantantrieb und angepresster Scheibe zur Aufnahme großer Lasten. Geeignet für die Befestigung von Hängestielen und Wandauslegern in Feuchträumen und im Außenbereich.
Gemäß EAD geprüftes, CE-gekennzeichnetes Bauprodukt mit Europäisch Technischer Bewertung (ETA) und Anwendbarkeitsnachweis. Tragfähigkeiten unter Brandbelastung bis zur Feuerwiderstandsklasse R120 nachgewiesen.
Sales unit: 25 pieces
Lieske Part No.: 875449

Schraubanker zur direkten Montage ohne Dübel in gerissenem und ungerissenem Beton sowie Mauerwerk. Mit Ringöse für universelle Befestigungen. Setzwerkzeug im Lieferumfang enthalten.
Sales unit: 200 pieces
Lieske Part No.: 1296812

Screw anchor for direct installation without dowels in concrete and masonry. With small countersunk head for attaching cable clamps through the threaded base.
Load-bearing capacity under fire load proven up to fire resistance class R120.
Sales unit: 200 pieces
Lieske Part No.: 136495

Schraubanker zur direkten Montage ohne Dübel in gerissenem und ungerissenem Beton sowie Mauerwerk. Mit großem Rundkopf für die Befestigung von Montage- und Profilschienen. Torx-Antrieb T30.
Gemäß EAD geprüftes, CE-gekennzeichnetes Bauprodukt mit Europäisch Technischer Bewertung (ETA) und Anwendbarkeitsnachweis. Tragfähigkeiten unter Brandbelastung bis zur Feuerwiderstandsklasse R120 nachgewiesen.
Lieske Part No.: 539492

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With large round head for fastening mounting and profile rails. Torx drive T30.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 50 pieces
Lieske Part No.: 1101397

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. M6 connection thread for fastening clamps with threaded base.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 100 pieces
Lieske Part No.: 1343511

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With combined threaded socket M8/M10 for fastening threaded rods.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 40 pieces
Lieske Part No.: 469429

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With round head for universal fastenings. Torx drive T30.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 50 pieces
Lieske Part No.: 1010226

Stainless steel screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With round head for universal fastening in damp rooms and outdoor areas. Torx drive T30.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 50 pieces
Lieske Part No.: 1101398

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 50 pieces
Lieske Part No.: 368619

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 468865

The NK nail anchor can be used for multiple fastenings of non-load-bearing systems in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 100 pieces
Lieske Part No.: 628956

The nail anchor N can be used for multiple fastenings of non-load-bearing systems in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. The subsequent application of a torque is not necessary. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 100 pieces
Lieske Part No.: 368604

The nail anchor N can be used for multiple fastenings of non-load-bearing systems in areas with highly corrosive influences in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. The subsequent application of a torque is not necessary. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 50 pieces
Lieske Part No.: 346790

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069878

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069879

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069880

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069881

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069882

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069883

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069884

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069885

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069709