Installation Material

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 318846

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 10 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 862032

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 6 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 190930

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 8 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 924918

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 90 - 100 mm
Sales unit: 25 pieces
Lieske Part No.: 513068

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 100 - 110 mm
Sales unit: 25 pieces
Lieske Part No.: 121882

NIEDAX - Make: BK 14
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy: 1 cable for cable diameter: 8 - 14 mm NIEDAX Model No.: BK 14th Type: BK14








Quantity: 1 unit.
Lieske Part No.: 117970

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 972080

NIEDAX - Make: BK 18
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. BK 18

Type: BK18
Quantity: 1 unit.
Lieske Part No.: 134655

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 393581

NIEDAX - Make: BK 22 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: BK 22 Type: BK22 item.
ST.
Lieske Part No.: 885317

NIEDAX - Make: BK 22/2 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameter:
. 8 - 22 mm NIEDAX Model No.: BK 22/2 Type: BK22 / 2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 825932

Hammer foot clamp, with plastic pressure tray, otherwise completely made of aluminum with screw according to DIN EN ISO 1207, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 540439

NIEDAX - Make: BK 26
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm . NIEDAX Model No.: BK 26 Type: BK26




Quantity: 1 unit.
Lieske Part No.: 168672

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 644653

NIEDAX - Make: BK 3 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model No.: BK 3 Type: BK3 item.
ST.
Lieske Part No.: 900086

NIEDAX - Make: BK 30/2
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays ( GW / GWS ...) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameters 26 - 30 mm

NIEDAX model no. BK 30/2 Type: BK30 / 2


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 465771

NIEDAX - Make: BK 34 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 3-34 mm NIEDAX model no. BK 34 Type: BK34 item:
ST.
Lieske Part No.: 937843

NIEDAX - Make: BK 34/2
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays ( GW / GWS ...) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cable



for cable diameters 30 - 34 mm

NIEDAX model no. BK 34/2 Type: BK34 / 2


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 194751

NIEDAX - Make: BK 38
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 34 - 38 mm

NIEDAX model no. BK 38

Type: BK38
Quantity: 1 unit.
Lieske Part No.: 398900

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 34 - 38 mm
Sales unit: 50 pieces
Lieske Part No.: 282255

NIEDAX - Make: BK 42
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately are.

Occupancy: 1 cable

for cable diameters 38 - 42 mm

NIEDAX model no. BK 42 Type: BK42


Quantity: 1 unit.
Lieske Part No.: 459217

NIEDAX - Make: BK 42/2
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays ( GW ...) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameters 38 - 42 mm NIEDAX Model No.: BC 42 / 2nd type: BK42 / 2








Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 620517

NIEDAX - Make: BK 46 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 42 - 46 mm NIEDAX Model No.: BK 46 Type: BK46 item.
ST.
Lieske Part No.: 510797

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 384509

NIEDAX - Make: BK 50
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately are.

Occupancy: 1 cable

for cable diameters 46 - 50 mm NIEDAX Model No.: BK 50th Type: BK50




Quantity: 1 unit.
Lieske Part No.: 287595

NIEDAX - Make: BK 50/2
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) and dual sinks ( DW ...) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameters 46 - 50 mm

NIEDAX model no. BK 50/2

Type: BK50 / 2
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 430688

Hammer foot clamp, with plastic pressure tray, otherwise completely made of aluminum with screw according to DIN EN ISO 1207, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 1313493

NIEDAX - Make: BK 54
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately. Occupancy: 1 cable for cable diameters 50 - 54 mm NIEDAX Model No.: BK 54th Type: BK54








Quantity: 1 unit.
Lieske Part No.: 559095

NIEDAX - Make: BK 58 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameters. 54-58 mm NIEDAX Model No.: BK 58 Type: BK58 item:
ST.
Lieske Part No.: 807238

NIEDAX - Make: BK 64
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately are.

Occupancy: 1 cable

for cable diameter: 58 - 64 mm

NIEDAX model no. BK 64

Type: BK64
Quantity: 1 unit.
Lieske Part No.: 135698

Hammer foot clamp, with plastic pressure tray, otherwise completely made of aluminum with screw according to DIN EN ISO 1207, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm
Sales unit: 50 pieces
Lieske Part No.: 466907

NIEDAX - Make: BK 70
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 64 - 70 mm . NIEDAX Model No.: BK 70 Type: BK70




Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 605887

NIEDAX - Make: BK 76
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 70 - 76 mm NIEDAX Model No.: BK 76th Type: BK76




Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 223111

NIEDAX - Make: BK 82 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameters. 76-82 mm NIEDAX Model No.: BK 82 Type: BK82 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 809556

NIEDAX - Make: BK 90
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW. ..) must be ordered separately are.

Occupancy: 1 cable

for cable diameters 82 - 90 mm

NIEDAX model no. BK 90

Type: BK90
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 430619

Cup screw, including hexagon nut and washer according to DIN EN ISO 7093-1, for fastening the cable ladder fastening ULKG and HSK 15 E3 to the boom KTA.... Dimensions (approx. dimensions) Thread: M 6 Thread length L: 30 mm Max. screw tightening torque: 7 Nm Material: Stainless steel, material no. 1.4401, 1.4404
Lieske Part No.: 193600

NIEDAX - Make: BU
Universal Clamp clip, in galvanized steel pressure tank according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels (2985-2996) with
8-22 mm slot width, counter trays (GWU. ..) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter: 9 -
NIEDAX mm model no. BU
Type: BU

ST.
Sales unit: 25 pieces
Lieske Part No.: 931960

NIEDAX - Make: BU 110
universal-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays (GWU. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 100 - 110 mm . NIEDAX Model No.: BU 110 Type: BU110




Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 653196

NIEDAX - Make: BU 12
Universal Clamp clip, in galvanized steel pressure tank according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays (GWU. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter 6 - 12 mm

NIEDAX model no. BU 12

Type: BU12
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 155594

Universal clamp with strip-galvanized steel pressure tray in accordance with DIN EN 10346, clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) and double trays (DW...) must be ordered separately. Please note additional regulations for use in functional maintenance! Allocation one above the other: 3 cables for cable Ø: 10 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 475821

Universal clamp, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trough (GWU...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 6 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 1426302

Universal clamp, made entirely of stainless steel E5, material no. 1.4571, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trough (GWU...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 6 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 244589

NIEDAX - Make: BU
4 Universal-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels (2985-2996) with
8-22 mm slot width, counter trays (GWU / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter:
-
4 mm NIEDAX model no. BU
4 Type: BU
4 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 811396

Universal U-clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 116667

Universal-Bügelschelle, mit Druckwanne und Zapfenschraube M 6 nach DIN EN ISO 1207 mit Mehrfachantrieb. Gegenwanne GWU ... bitte gesondert bestellen. Verwendung für : C-Profilschienen mit 18 - 22 mm Schlitzweite Abmessungen (ca. Maße) Belegung : 1 Kabel für Kabel-Ø : 10 - 14 mm Werkstoff Bügel : Aluminium Werkstoff Druckwanne : Aluminium
Sales unit: 100 pieces
Lieske Part No.: 801270

Universal clamp, made entirely of stainless steel E5, material no. 1.4571, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trough (GWU...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 10 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 718790

NIEDAX - Make: BU 16
Universal Clamp clip, in galvanized steel pressure tank according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays (GWU / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 12 - 16 mm

NIEDAX model no. BU 16

Type: BU16
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 409846

Universal clamp with strip-galvanized steel pressure tray in accordance with DIN EN 10346, clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU/GWS...) and double trays (DW...) must be ordered separately. Please note additional regulations for use in functional maintenance! Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 914040

Universal U-clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 709961