Installation Material

NIEDAX - Make: BWK 46
Cable clamp for angle iron, plastic pressure trough made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 42 - 46 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BWK 46

Type: BWK46
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 595778

NIEDAX - Make: BWK 50
Cable clamp for angle iron, plastic pressure trough made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 46 - 50 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BWK 50

Type: BWK50
Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 358334

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 54 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426333

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 52 - 58 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426334

U-clamp, for angle iron, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426335

E-clips, steel cable, with 7 strands and 7 wires each, for universal suspension. Dimensions (approx. dimensions) Length L: 30000 mm Rope Ø: 3 mm Wire rope Strands: 7 Wires: 7 Load capacity F: 1.9 kN Material: Steel, hot-dip galvanized
Lieske Part No.: 1315954

ISO-D clamp, made of impact-resistant grey polystyrene, halogen-free, closed design, for 1 cable. for cable Ø: 16 - 24 mm
Lieske Part No.: 1427622

ISO-D clamp, made of impact-resistant grey polystyrene, halogen-free, closed design, for 1 cable. For cable Ø: 24 - 34 mm
Lieske Part No.: 1426297

Push-through anchor with metric connection thread M 6, including galvanized flange nut. Permissible loads for centric tension, transverse load and diagonal tension at any angle as well as anchor characteristics and component dimensions for concrete strength classes = B 25 or C 20/25 and = B 55 or C 50/60. The entire approval notice no.: ETA-18/0541 must be observed when dimensioning! For outdoor areas we recommend push-through anchors made of stainless steel! For use in functional maintenance or for suspended ceilings with fire protection requirements (model pipe system guideline MLAR 2/2015) please note additional regulations! Area of application: The anchor can be used as a multiple fastening for anchoring light ceiling cladding and suspended ceilings in accordance with DIN 18168, as well as for statically comparable anchoring up to 1 kN/m² - also in the tensile zone generated by load stresses. When setting the push-through anchor, ensure that the effective anchoring depth is maintained. Compliance is ensured by adhering to the permissible thickness of the fixture (clamping range). Technical details Connecting thread: M 6 Total length L: 55 mm Nominal drilling diameter: 6 mm Clamping range t fix: = 10 mm Effective anchoring depth h ef: 30 mm Recommended torque: 4 Nm Wrench size: 10 Material: Steel, galvanized in accordance with DIN EN ISO 2081/4042, blue passivated Approval no.: ETA-18/0541 DoP NI001
Sales unit: 100 pieces
Lieske Part No.: 1337353

NIEDAX - Make: DAM 6X5
Through anchor, steel, galvanized to DIN 50961, passivated, including galvanized nut and galvanized washer. For use in the functional integrity please follow additional rules! Permissible loads for train-centric, cross and shear loading at any angle and anchor characteristics and dimensions for concrete strength> = B 25 and C 20 / 25th When calculating the
entire certification No.: ETA-06/0175 to note! For outdoor use, we recommend anchor made of stainless steel!

Dimensions:

permissible load of single anchors: 1.6 kN

Permissible bending moment M: 4 Nm
max. Torque when attaching the fixture with torque =
Key M (D): 4 Nm

Nominal drill hole diameter d (0) = 6 mm

Cutting diameter of <= 6,4 mm
Through hole in the subsequent
Component d (f) <= 7 mm

minimum hole depth h (0)> = 40 mm

minimum anchoring depth h (v)> = 30 mm
Center distance between the outer anchors of adjoining groups
or single anchors az> = 200 mm
Spacing of the outer anchor
to the component edge ar> = 100 mm

Minimum thickness d (a) = 80 mm

Total length l = 50 mm

Fixture thickness t fix <= 5 mm

Certificate No.:. ETA-06/0175

Scope: The anchor may as multiple fixing for the anchorage for suspended ceilings and suspended ceilings according to DIN 18168, as well as for static anchors similar to 1 kN / mý - used - even in the tension zone generated from load voltages.

NIEDAX model no. DAM 6x5

Type: DAM6x5
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 253806

NIEDAX - Make: DAZ 10X10
stud anchor, steel, galvanized to DIN 50961, blue passivated, including galvanized galvanized washer and nut. For use in the functional integrity please follow additional rules! For outdoor use, we recommend anchor made &#8203;&#8203;of stainless steel!

Dimensions:

Diam.x max. Mat thickness: M 10 x 10 mm embedment depth: 60 mm Mounting Torque: 45 Nm Drill diameter: 10 mm Hole depth including mounting part thickness: 80mm Certificate No.:. ETA-00/0001 and ETA-05/0069 NIEDAX Model No. .: DAZ 10x10 Type: DAZ10X10 item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 114924

NIEDAX - Make: DAZ 10X30
stud anchor, steel, galvanized to DIN 50961, blue passivated, including galvanized galvanized washer and nut. For use in the functional integrity please follow additional rules! For outdoor use, we recommend anchor made of stainless steel!

Dimensions:

Diam. x max.Mat thickness: M 10 x 30 mm embedment depth: 60 mm Mounting Torque: 45 Nm Drill diameter: 10 mm






Including drill hole depth
Assembly part thickness: 100 mm

Certificate No.:. ETA-00/0001 and ETA-05/0069

NIEDAX model no. DAZ 10x30 Type: DAZ10X30


Item: 100 ST.
Sales unit: 25 pieces
Lieske Part No.: 663291

Cover fastening, consisting of plastic rivet and screw, for fastening the GRP cable tray/cable ladder covers as well as GRP cable tray and cable ladder fitting covers, halogen-free. A hole Ø 8.2 mm is required to fasten the cover. When fastening, ensure that under normal conditions 2 pieces per meter are attached alternately. Due to external influences, such as wind loads, the number of cover fastenings must be increased. . Can be used for: GRP cable tray/cable ladder cover KKD... GRP cable tray cover KPD... GRP cover for cable tray BKDR 200, BKDR 300 and BKDR 400 GRP cable tray fitting cover Bend 45° KKCD... Bend 90° KKBD... Bend 90°, small KKWD... Gutter riser bend KKBID... Gutter fall bend KKBAD... Level KKETD... Attachment T-piece, small KKSSD... Attachment T-piece, large KKSTD... Reduction, right KKRRD... Reduction, left KKRLD... GRP cable ladder fitting cover Bend 90° ULBD... Bend 90°, large ULBGD... Bend 2x45° ULBAD... T-piece ULTED... Crossing ULXD... Dimensions (approx. dimensions) Rivet Ø: 9 mm Rivet height: 14 mm Rivet plate : Ø 20 mm Material : PA (polyamide) Colour : black RAL : 9005 (similar)
Sales unit: 50 pieces
Lieske Part No.: 587017

Roof tile, concrete tile with hot-dip galvanized anchor rail 2986 and foam rubber pad, for laying cable trays, pipes, rails and cables using U-clamps, sliding nuts and screws, the installation is suitable e.g. on flat roof surfaces or for floor mounting, the foam rubber pad made of rot-proof material serves as a solid support surface and prevents damage to the existing roof covering, for cable tray fastening on the anchor rail sliding nut GMZ M... F please order separately. Please note: The roof-mounted installation must be coordinated with the building owner or specialist planner with regard to the possible additional loads depending on the location. Dimensions (approx. dimensions) Foam rubber pad H x W x L : 10 x 150 x 500 mm Concrete block H x W x L : 110 x 150 x 500 mm Anchor rail H x W x L : 22 x 40 x 500 mm Slot width : 18 mm Pad material : Foam rubber, halogen-free Stone material : Concrete Rail material : Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 1344999

Double tray, for all clamps, to be inserted between the cables, halogen-free. for clamps: with 2 or 3 cables Dimensions (approx. dimensions) for cable Ø: 8 - 12 mm Length L: 40 mm Operating temperature range: -30° to 60°C Color: light gray RAL: 7035 (similar) Material: polystyrene (PS), impact-resistant, silicone-free (free from paint-wetted substances)
Sales unit: 100 pieces
Lieske Part No.: 211223

Double tray, for all clamps, for insertion between the cables, halogen-free. for clamps: with 2 or 3 cables Dimensions (approx. dimensions) for cable Ø: 12 - 14 mm Length L: 40 mm Operating temperature range: -30° to 60°C Color: light gray RAL: 7035 (similar) Material: polystyrene (PS), impact-resistant, silicone-free (free from paint-wetted substances)
Sales unit: 100 pieces
Lieske Part No.: 596496

Double tray, for all clamps, for insertion between the cables, halogen-free. for clamps: with 2 or 3 cables Dimensions (approx. dimensions) for cable Ø: 14 - 16 mm Length L: 40 mm Operating temperature range: -30° to 60°C Color: light gray RAL: 7035 (similar) Material: polystyrene (PS), impact-resistant, silicone-free (free from paint-wetted substances)
Lieske Part No.: 712374

Double tray, for all clamps, for insertion between the cables, halogen-free. for clamps: with 2 or 3 cables Dimensions (approx. dimensions) for cable Ø: 16 - 18 mm Length L: 40 mm Operating temperature range: -30° to 60°C Color: light gray RAL: 7035 (similar) Material: polystyrene (PS), impact-resistant, silicone-free (free from paint-wetted substances)
Sales unit: 100 pieces
Lieske Part No.: 737211

Double tray, for all clamps, to be inserted between the cables, halogen-free. for clamps: with 2 or 3 cables Dimensions (approx. dimensions) for cable Ø: 18 - 20 mm Length L: 40 mm Operating temperature range: -30° to 60°C Color: light gray RAL: 7035 (similar) Material: polystyrene (PS), impact-resistant, silicone-free (free from paint-wetted substances)
Lieske Part No.: 982704

NIEDAX - Make: DW 22 double sink, all clamps, made of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables. for cable diameter: 2-22 mm Length: 4 mm NIEDAX Model No.: DW 22 Type: DW22 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 984136

NIEDAX - Make: DW 26 double sink, all clamps, made of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables. for cable diameters 22 - 26 mm Length: 4 mm NIEDAX Model No.: DW 26 Type: DW26 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 850974

NIEDAX - Make: DW 30
double sink, all clamps, made &#8203;&#8203;of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables. suitable for cable diameters 26 - 30 mm Length: 40 mm . NIEDAX Model No.: DW 30 Type: DW30








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 115261

NIEDAX - Make: DW 34 double sink, all clamps, made of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables. for cable diameter: 3-34 mm Length: 4 mm NIEDAX Model No.: DW 34 Type: DW34 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 526388

NIEDAX - Make: DW 38
double sink, all clamps, made &#8203;&#8203;of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables. suitable for cable diameters: 34 - 38 mm Length: 40 mm . NIEDAX Model No.: DW 38 Type: DW38








Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 580785

NIEDAX - Make: DW 42
Double sink, all clamps, made of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables.

for cable diameters 38 - 42 mm

Length: 40 mm

NIEDAX model no. Ext 42

Type: DW42
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 236506

Double tray, for all clamps, for insertion between the cables, halogen-free. for clamps: with 2 or 3 cables Dimensions (approx. dimensions) for cable Ø: 42 - 46 mm Length L: 40 mm Operating temperature range: -30° to 60°C Color: light gray RAL: 7035 (similar) Material: polystyrene (PS), impact-resistant, silicone-free (free from paint-wetted substances)
Lieske Part No.: 973738

NIEDAX - Make: DW 5 double sink, all clamps, made of impact-resistant polystyrene, halogen-free, for 2 or 3 wire, for insertion between the cables. for cable diameter: 46 - 5 mm Length: 4 mm NIEDAX Model No.: DW 5 Type: DW5 item.
ST.
Lieske Part No.: 547022

E-clips, universal claw for cable clamps, for striking with a hammer on a wide variety of support flanges and for holding up to three flange cable clamps, for cable and pipe fastening. for flange cable clamp: ECS... Dimensions (approx. dimensions) for flange thickness T: 15 - 20 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 480573

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 8 - 12 mm for pipe Ø: 20 - 24 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 304639

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 8 - 12 mm for pipe Ø: 25 - 32 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460722

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 4 - 7 mm for pipe Ø: 15 - 19 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 688486

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 2 - 4 mm for pipe Ø: 15 - 19 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 270759

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 2 - 4 mm for pipe Ø: 20 - 24 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 709088

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 207995

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 414798

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315698

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 537586

E-clips, flange claw, for hammering onto a wide variety of support flanges. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227 EP Material___________ EP Labor__________Unit price/pieceE-clips, flange claw, for hammering onto a wide variety of support flanges. for flange thickness: 8 - 14 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 840668

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 3 - 8 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 12 - 19 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 886709

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 12 - 19 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 289611

E-clips, universal flange claw with pipe clip, for hammering onto a wide range of support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 19 - 26 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230366

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 26 - 32 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 286896

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 22 - 29 mm Load capacity F: 0.11 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315957

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg: 50 mm for connecting threaded rod A: M 10 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 454878

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for threaded rod through hole: Ø 11 mm Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 126748

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 23 mm Height H x Width B: 54 x 49 mm Width of lower leg A: 59 mm for connecting threaded rod: M 12 Load capacity F: 3 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 336117

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 23 mm Height H x Width B: 54 x 49 mm Width of lower leg A: 59 mm for threaded rod through hole: Ø 13 mm Load capacity F: 3 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 977519

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for connecting threaded rod: M 6 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 811615

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for connecting threaded rod: M 8 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 906491

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for threaded rod through hole: Ø 9 mm Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 537588