Installation Material

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
4.5 mm Ø
Length: 30 mm

Type: X30 4758 4.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 131734

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
4.5 mm Ø
Length: 35 mm

Type: X35 4758 4.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 227819

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) Ø 4.5 mm Length: 4 mm Type: X4 4758 4.5 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 889948

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
4.5 mm Ø
Length: 45 mm

Type: X45 4758 4.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 239924

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 4.5 mm
Length: 50 mm Type: X50 4758 4.5


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 618404

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 5 mm Ø Length: 3 mm Type: 4758 5X3 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 885247

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) Ø 5 mm Length: 35 mm Type: 5X35 4758 item 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 815369

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 5 mm Ø Length: 4 mm Type: 4758 5X4 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 855884

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 594421

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 5.0 mm
Length: 50 mm Type: 4758 5X50


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 684765

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 417196

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 220568

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 348010

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
6.0 mm Ø
: 6,0 x 50 mm

Type: 4758/6X50
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 561418

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 578411

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 937048

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 662369

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426034

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 972219

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 225171

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 617994

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 285698

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 639576

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 686739

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 162686

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 786395

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 528974

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 538584

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 322434

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 430318

Hardened steel, galvanized and yellow passivated, as well as Hostaflon coated, panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 894118

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 365359

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 124035

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 941946

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426022

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 800546

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426325

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561638

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 982421

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561688

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561693

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426285

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 318781

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 146155

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561696

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 309211

Sprint screw T-hardened 4759 steel, galvanized and gelbchro formatted and Hostaflon, countersunk head with T-bit (hexagon round). The Gr. Ø 3 mm T
, Ø 3.5 mm T
5, 4 and 4.5 mm Ø T2, T25 Ø 5 mm Ø 7.5 mm Length: 2 mm Type: 4759T 4 x2 Quantity: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 877694

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426292

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 317680

Sprint screw T-hardened 4759 steel, galvanized and gelbchro formatted and Hostaflon, countersunk head with T-bit (hexagon round). The Gr. Ø 3 mm T
, Ø 3.5 mm T
5, 4 and 4.5 mm Ø T2, T25 Ø 5 mm Ø 7.5 mm Length: 35 mm Type: 4759T 4 x35 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 883295