Installation Material

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 6 - 12 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 744276

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 10 - 12 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426321

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 398748

NIEDAX - Make: BW 14 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 10 - 14 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 14 AL Type: BW14AL


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 443431

U-clamp, for angle iron, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, bracket hot-dip galvanized in accordance with DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 16 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 526834

U-clamp for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426322

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 14 - 18 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 187045

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 16 - 18 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426312

NIEDAX - Make: BW 18 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 18 AL

Type: BW18AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 595103

NIEDAX - Make: BW 22
Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 18 - 22 mm
angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm NIEDAX Model No.: BW 22nd Type: BW22




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 142561

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 18 - 22 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 426151

NIEDAX - Make: AL BW 22 Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO
2 7, also use to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 22 AL Type: BW22AL item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 505992

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 26 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 578658

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426324

NIEDAX - Make: BW 26 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 26 AL

Type: BW26AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 363106

NIEDAX - Make: BW 3 Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 3 Type: BW3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 707354

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 26 - 30 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426311

Bügelschelle, für Winkeleisen, mit Druckwanne und Zapfenschraube M 8 nach DIN EN ISO 1207 mit Mehrfachantrieb, einsetzbar an gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen. Gegenwanne GWU ... bitte gesondert bestellen. Verwendung für : gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen mit einer Schenkellänge von max. 40 mm sowie einer Dicke von 4 - 6 mm Abmessungen (ca. Maße) Belegung : 1 Kabel für Kabel-Ø : 26 - 30 mm Werkstoff Bügel : Aluminium Werkstoff Druckwanne : Aluminium
Sales unit: 100 pieces
Lieske Part No.: 796758

NIEDAX - Make: BW 34
Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 30 - 34 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 34

Type: BW34
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 490447

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 30 - 34 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426326

NIEDAX - Make: AL BW 34 Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO
2 7, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 3-34 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 34 AL Type: BW34AL item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 959916

NIEDAX - Make: BW 38 Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 34 - 38 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 38 Type: BW38 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 718188

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 34 - 38 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426327

NIEDAX - Make: AL BW 38 Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO
2 7, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 34 - 38 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 38 AL Type: BW38AL item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 548975

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 38 - 42 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 474577

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426328

NIEDAX - Make: AL BW 42 Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO
2 7, also use to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameters 38 - 42 mm angle iron Dimensions H x W x D:. 4 x 4 x 4-6 mm NIEDAX Model No.: BW 42 AL Type: BW42AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 852531

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 42 - 46 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 411177

NIEDAX - Make: AL BW 46
Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately. Occupancy: 1 cable for cable diameter: 42 - 46 mm angle iron dimensions H x W x D: 40 x 40 x 4-6 mm NIEDAX Model No.: BW. 46 AL Type: BW46AL










Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 563053

NIEDAX - Make: BW 5 Strap clamp for angle iron, in galvanized steel pressure tank according to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 46 - 5 mm angle iron Dimensions H x W x D:. 4 x 4 x 4-6 mm NIEDAX Model No.: BW 5 Type: BW5 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 823694

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426329

NIEDAX - Make: BW 50 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 46 - 50 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 50 AL

Type: BW50AL
Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 467735

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 50 - 54 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 507645

NIEDAX - Make: AL BW 54 Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO
2 7, also use to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter 5 - 54 mm angle iron Dimensions H x W x D:. 4 x 4 x 4-6 mm NIEDAX Model No.: BW 54 AL Type: BW54AL item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 953888

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 54 - 58 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 521601

NIEDAX - Make: BW 58 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 54 - 58 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 58 AL

Type: BW58AL
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 151683

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 253596

NIEDAX - Make: BW 64 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 58 - 64 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 64 AL Type: BW64AL


Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 634896

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426028

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 288992

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 76 - 82 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 744271

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 82 - 90 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 25 pieces
Lieske Part No.: 1426029

NIEDAX - Make: BWK
4, clamp for angle iron, with PP plastic pressure trough, halogen-free, bath mat galvanized to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 8 -
4 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX model no. BWK
Type 4: BWK
4 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 985235

NIEDAX - Make: BWK 18
Cable clamp for angle iron, plastic pressure trough made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BWK 18 Type: BWK18


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 604638

NIEDAX - Make: BWK 22 Cable clamp for angle iron, with PP plastic pressure trough, halogen-free, bath mat galvanized to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BWK 22 Type: BWK22 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 760040

NIEDAX - Make: BWK 26
Cable clamp for angle iron, plastic pressure trough made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BWK 26 Type: BWK26


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 190501

NIEDAX - Make: BWK 30
Cable clamp for angle iron, plastic pressure trough made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 26 - 30 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BWK 30

Type: BWK30
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 396617

NIEDAX - Make: BWK 34 Cable clamp for angle iron, with PP plastic pressure trough, halogen-free, bath mat galvanized to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 3-34 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BWK 34 Type: BWK34 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 707926

NIEDAX - Make: BWK 38 Cable clamp for angle iron, with PP plastic pressure trough, halogen-free, bath mat galvanized to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter. 34-38 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BWK 38 Type: BWK38 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 723275

NIEDAX - Make: BWK 42
Cable clamp for angle iron, plastic pressure trough made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 38 - 42 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BWK 42 Type: BWK42


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 220134