Installation Material

NIEDAX - Make: HM 308/40
T-head bolt M 8 with hexagon nut and washer, for C-series rail model 2913 and model 2914 C-anchor rail with 11 mm slot width and C-anchor rails model 2916 and 2917 with 12 mm slot width, galvanized Accor ding to DIN ISO 4042, blue passivated. lengths: 40 mm model no NIEDAX HM 308/40 Type: HM308/40






Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 230990

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 4 mm Thread: M 8 Length L: 50 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 521889

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 5 mm Thread: M 10 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 1426288

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 5 mm Thread: M 10 Length L: 40 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 755696

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 5 mm Thread: M 10 Length L: 50 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 318852

NIEDAX - Make: HM 408/20
T-head bolt M 8 with hexagon nut and washer, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width, galvanized according to DIN ISO 4042, blue passivated. lengths: 20 mm NIEDAX Model no. HM 408/20 Type: HM408/20






Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 150415

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Head length: 31 mm Head width: 15.5 mm Head height: 6 mm Thread: M 8 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 332112

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Head length: 31 mm Head width: 15.5 mm Head height: 6 mm Thread: M 8 Length L: 40 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 398308

NIEDAX - Make: HM 4
/ 3 hammer head screw M
with hexagon nut and washer, anchor channels for C-Model 297, 297
, 2972, 2975 and 298 with
6 mm slot width, galvanized 4 42, blue passivated according to DIN ISO. L Length: 3 mm NIEDAX model no. HM 4
/ 3 type: HM4
/ 3 Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 880216

NIEDAX - Make: HM 410/40
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width, galvanized according to DIN ISO 4042, blue passivated. lengths: 40 mm NIEDAX Model no. HM 410/40 Type: HM410/40






Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 244950

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Head length: 31 mm Head width: 15.5 mm Head height: 6 mm Thread: M 10 Length L: 50 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Lieske Part No.: 273479

Hammerkopfschraube, mit Verzahnung, einschließlich Sechskantmutter und Unterlegscheibe nach DIN EN ISO 7093-1, an jeder Stelle im Profil einsetzbar. Verwendung für : Ankerschienen 2996Z, 2997Z mit 22 mm Schlitzweite Wandausleger STRUT HKC 96Z/..., Hängestiel und Wandausleger STRUT HKC 96ZD/... Abmessungen (ca. Maße) Kopflänge : 34,5 mm Kopfbreite : 19,5 mm Kopfhöhe : 9 mm Gewinde : M 10 Länge L : 30 mm Festigkeitsklasse : 4.6 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461
Sales unit: 50 pieces
Lieske Part No.: 702358

Hammerkopfschraube, mit Verzahnung, einschließlich Sechskantmutter und Unterlegscheibe nach DIN EN ISO 7093-1, an jeder Stelle im Profil einsetzbar. Verwendung für : Ankerschiene 2996Z mit 22 mm Schlitzweite Wandausleger STRUT HKC 96Z/..., Hängestiel und Wandausleger STRUT HKC 96ZD/... Abmessungen (ca. Maße) Kopflänge : 34,5 mm Kopfbreite : 19,5 mm Kopfhöhe : 11 mm Gewinde : M 12 Länge L : 60 mm Festigkeitsklasse : 4.6 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461
Sales unit: 50 pieces
Lieske Part No.: 702273

Ceiling hook, with NIEDAX steel dowel with pressed-in cone nut, the cone of the steel dowel is captive with anti-twist protection. The dowel has not been approved by the building authorities and can therefore only be used for secondary fastenings. Dimensions (approx. dimensions) Dowel length L: 40 mm Nominal drilling diameter: 10 mm Hook diameter inside: 16 mm Hook screw: M 5X42 Material: Steel, galvanized according to DIN EN ISO 2081 or DIN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 460375

Profile clamp for clamping connection to steel beam flanges. Dimensions (approx. dimensions) Clamp height H: 15 mm Width B: 50 mm Length L: 50 mm Material thickness t: 6 mm Mounting hole: 11 x 15 mm for beam flange thickness: 10 - 14 mm Material: Stainless steel, material no. 1.4301, AISI 304
Sales unit: 10 pieces
Lieske Part No.: 330642

Profile clamp for clamping connection to steel beam flanges. Dimensions (approx. dimensions) Clamp height H: 25 mm Width B: 50 mm Length L: 50 mm Material thickness t: 6 mm Mounting hole: 11 x 15 mm for beam flange thickness: 20 - 24 mm Material: Stainless steel, material no. 1.4301, AISI 304
Sales unit: 10 pieces
Lieske Part No.: 230407

E-clips, wall hooks, open, for connection to wall and ceiling with 4-hole fastening, for rope suspension. Dimensions (approx. dimensions) Fastening plate: 50 x 50 mm Plate thickness: 5 mm Fastening holes: 4 x Ø 5.5 mm Center hole spacing: 32 mm Hook length: 55 mm Hook opening size: 8 mm Load capacity F: 0.25 kN Material: Steel, hot-dip galvanized
Sales unit: 10 pieces
Lieske Part No.: 817169

Emergency link, for extending knotted chains. for knotted chain: KCH... Dimensions (approx. dimensions) Emergency link inner dimension H: 28 mm Material thickness: 4 mm Material: Stainless steel, material no. 1.4301, 1.4303
Sales unit: 100 pieces
Lieske Part No.: 1345162

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 26 mm Outer chain link dimension B: 12 mm Material thickness t: 3 mm Load-bearing capacity F: 0.45 kN Delivery length L: 30 m Material: Steel, hot-dip galvanized
Sales unit: 30 meters
Lieske Part No.: 112490

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 32 mm Outer chain link dimension B: 16 mm Material thickness t: 4 mm Load-bearing capacity F: 0.8 kN Delivery length L: 30 m Material: Steel, hot-dip galvanized
Sales unit: 30 meters
Lieske Part No.: 364460

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 32 mm Outer chain link dimension B: 16 mm Material thickness t: 4 mm Load-bearing capacity F: 0.8 kN Delivery length L: 30 m Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 30 meters
Lieske Part No.: 614227

E-clips, T-claw with eyelet, T-claw with hole for additional securing to the ceiling profile, with central connection eyelet, for fastening to ceiling profiles, for rope and chain fastening. Dimensions (approx. dimensions) Ceiling profile width: 25 mm Eyelet: Ø 6 mm Center hole spacing to ceiling profile surface: 7 mm Claw hole: Ø 3 mm Load capacity F: 0.22 kN Material: Steel, painted Color: white
Sales unit: 100 pieces
Lieske Part No.: 460734

Screw head plate, head plate with welded connection plate and two pre-assembled connector brackets, for mounting on sloping ceilings or horizontally inclined beams, with a vertical adjustment range of max. +/- 50°, including hot-dip galvanized proportional fastening accessories. For profile: I 80/... in accordance with DIN 1025 Dimensions (approx. dimensions) Head plate L x W x t: 200 x 80 x 6 mm Fastening hole: 13 x 28 mm center distance: 152 mm Connector bracket hole: ¿ 11 mm center distance: 100 mm Total length L: 261 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 675790

Link chain, according to DIN 763, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 22 mm Outer chain link dimension B: 8 mm Material thickness t: 2 mm Load-bearing capacity F: 0.5 kN Delivery length L: 50 m Material: Stainless steel, material no. 1.4401, 1.4404
Sales unit: 50 meters
Lieske Part No.: 577743

Link chain, according to DIN 763, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 26 mm Outer chain link dimension B: 12 mm Material thickness t: 3 mm Load-bearing capacity F: 1.2 kN Delivery length L: 50 m Material: Stainless steel, material no. 1.4401, 1.4404
Sales unit: 50 meters
Lieske Part No.: 1315972

Screw head plate, head plate with welded C-profile with continuous holes on both sides, for mounting on horizontal ceilings, including hot-dip galvanized fastening accessories. Please observe additional regulations for use in functional maintenance! Use for: Profile U 6040/... Anchor rail/profile rail 2996Z/... Dimensions (approx. dimensions) Head plate L x W x D: 200 x 80 x 6 mm Fastening holes: 13 x 28 mm Center distance: 152 mm Two-sided profile holes, single row: 13 x 25 mm Center distance: 50 mm Total length L: 106 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 146146

Kabeltragwannensystem, für die Wandmontage oder zur Befestigung an Schienen. In Anlehnung an die VDE 0298-565-1 und VDE 0298-565-2 sollte ein max. Stützabstand von 0,8 m nicht überschritten werden. Die Tragfähigkeitsangaben gelten nur bei ausreichender Verankerung mit dem tragenden Untergrund und wenn im Klemmbereich die Oberflächen der vertikal verlaufenden Profil-/Ankerschienen und der Wannentragschienen aus Stahl oder verzinktem Stahl sind. Ist der Klemmbereich mit einem Farbanstrich versehen, muss dieser entfernt werden, da sonst die Tragfähigkeit nicht gegeben bzw. gewährleistet ist. Gefahr des Abrutschens! 1. Das Kabeltragwannensystem in den Wannenbreiten 40, 50, 60, 70, 80 und 120 mm auf Anfrage als Sonderanfertigung lieferbar. Befestigungsmaterial muss, je nach Anwendungsfall, gesondert bestellt werden. Abmessungen (ca. Maße) Wanne B x L : 100 x 200 mm Anzahl der Tragwannen übereinander : 5 Abstand der Tragwannen : 100 mm Tragfähigkeit F bei B/2 : 0,5 kN Schiene H x B : 485 x 72 mm Schienenlochung : 11 x 16 mm mittiger Lochabstand : 100 mm Anzahl der Lochung : 5 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461
Lieske Part No.: 509654

NIEDAX - Make: LW 16
Long trough for clamp clamp type B 16, BA 16, BU 16, BF 16 and BW 16, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 16 + BU 16

for cable diameter: 8 - 13 mm

L Length: 200 mm

NIEDAX model no. LW 16

Type: LW16
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 150979

NIEDAX - Make: LW 22 long trough for clamp clamp type B 22, BA 22, BU 22, BF 22 and BW 22, from steel strip galvanized to DIN EN
346th Additionally approved for function maintenance to DIN 4
2, part
2 /
.9
If the conditions are met for integrity and then only for the Band type B 22 + BU 22 for cable diameter:
3 -
9 mm Length L: 2 mm NIEDAX model no. LW 22 Type: LW22 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 845505

NIEDAX - Make: LW 26
long trough for clamp clamp type B 26, BA 26, BU 26, BF 26 and BW 26, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 26 + BU 26 for cable diameters 19 - 23 mm



L Length: 200 mm

NIEDAX model no. LW 26 Type: LW26


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 370240

NIEDAX - Make: LW 34
long trough for clamp clamp type B 34, BA 34, BU 34, BF 34 and BW 34, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 34 + BU 34 for cable diameters 23 - 31 mm



L Length: 200 mm

NIEDAX model no. LW 34 Type: LW34


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 635644

NIEDAX - Make: LW 38
long trough for clamp clamp type B 38, BA 38, BU 38, BF 38 and BW 38, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 38 + BU 38 for cable diameters: 31 - 36 mm



L Length: 200 mm

NIEDAX model no. LW 38 Type: lw38


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 613556

NIEDAX - Make: LW 42
Long trough for clamp clamp type B 42, BA 42, BU 42, BF 42 and BW 42, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 42 + BU 42

for cable diameters 36 - 40 mm

L Length: 200 mm

NIEDAX model no. LW 42

Type: LW42
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 564796

Long tray, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter tray BU ... without counter tray for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 39 - 43 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 100 pieces
Lieske Part No.: 545417

NIEDAX - Make: LW 5 long trough for clamp clamp type B 5, 5 BA, BU 5, 5 BF and BW 5, from steel strip galvanized to DIN EN
346th Additionally approved for function maintenance to DIN 4
2, part
2 /
.9
If the conditions are met for integrity and then only for the Band type B 5 + BU 5th for cable diameters 43 - 47 mm Length L: 2 mm NIEDAX Model No.: LW 5 Type: LW5 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 882897

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 47 - 51 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 893472

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 51 - 55 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 557701

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 55 - 61 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 678117

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 61 - 67 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 212985

Long tray, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter tray BU ... without counter tray for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 67 - 73 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 599983

Machine installation pipe for the cable protection pipe system. Dimensions (approx. dimensions) Pipe Ø: 30 mm Material thickness t: 1.5 mm Delivery length L: 6000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO 1461
Sales unit: 6 meters
Lieske Part No.: 882710

Machine installation pipe for the cable protection pipe system. Dimensions (approx. dimensions) Pipe Ø: 60 mm Material thickness t: 2 mm Delivery length L: 6000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO 1461
Sales unit: 6 meters
Lieske Part No.: 315626

Pole connection holder, with coupling, for crossing fastening of cable protection pipes to the poles of cable trays and cable ladders. Can be used for: Machine installation pipe MI 30... on cable trays RL..., RS... etc. and cable ladders KL... Dimensions (approx. dimensions) for pole clamp width B: = 15 mm Clamp length: 120 mm Coupling Ø: 30 mm Coupling length: 80 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 317845

Beam connection holder, with round steel bracket, for crossing fastening of cable protection pipes to beams of cable trays and cable ladders. Can be used for: Machine installation pipe MI 30... on cable trays RL..., RS... etc. and cable ladders KL... Dimensions (approx. dimensions) for beam clamp width B: = 15 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125531

Stile connection holder, with round steel bracket, for crossing fastening of cable protection pipes to stiles of wide-span cable trays and wide-span cable ladders. Can be used for: Machine installation pipe MI 30... on wide-span cable trays WRL..., WRLM... and wide-span cable ladders WSL..., WSLM... Dimensions (approx. dimensions) for stile clamp width B: = 30 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125529

Pole connection holder, with round steel bracket, for crossing fastening of cable protection pipes to the poles of the Allround cable ladders. Can be used for: Machine installation pipe MI 30... on Allround cable ladders KRC... / KRO... Dimensions (approx. dimensions) for cable ladder poles H x W: 60 x 20 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 593760

Stile connection holder, with round steel bracket, for crossing fastening of cable protection pipes to stiles of wide-span cable trays and wide-span cable ladders. Can be used for: machine installation pipe MI 60..., machine installation pipe MIG 60... and installation pipe connection MIA 60... on wide-span cable trays WRL..., WRLM... and wide-span cable ladders WSL..., WSLM... Dimensions (approx. dimensions) for stile clamp width B: = 30 mm Clamp length: 120 mm Round steel bracket Ø: 60 mm Material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125489

Coupling for connecting machine installation pipes aligned lengthwise, for connecting pipe bends and for fastening to the floor connection. Can be used for: Machine installation pipe MI 30... Dimensions (approx. dimensions) Coupling Ø: 30 mm Coupling length: 80 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 835956

Coupling for connecting machine installation pipes aligned lengthwise, for connecting pipe bends and for fastening to the floor connection. Can be used for: machine installation pipe MI 60..., machine installation pipe MIG 60... and installation pipe connection MIA 60... Dimensions (approx. dimensions) Coupling Ø: 60 mm Coupling length: 115 mm Material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 317959

Pipe clamp, double-lobed, with mounting holes, for fastening machine installation pipes. Can be used for: Machine installation pipe MI 30... Dimensions (approx. dimensions) Height H x Width W x Length L: 29.5 x 25 x 85 mm Mounting holes: 8.5 x 10 mm Center distance: 60 mm for pipe Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 125494