Installation Material

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm
Sales unit: 50 pieces
Lieske Part No.: 806232

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 528654

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 466812

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 318805

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 76 - 82 mm
Sales unit: 50 pieces
Lieske Part No.: 318808

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 82 - 90 mm
Sales unit: 50 pieces
Lieske Part No.: 318809

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 90 - 100 mm
Sales unit: 25 pieces
Lieske Part No.: 339094

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 100 - 110 mm
Sales unit: 25 pieces
Lieske Part No.: 976883

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 8 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 587993

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 592488

NIEDAX - Brand: BAK 22
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX rows / anchor channels (2910-2920) with 11-12 mm slot width, counter trays (GWA / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 18 - 22 mm

NIEDAX model no. BAK 22

Type: BAK22
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 178253

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 658054

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 591745

NIEDAX - Brand: BAK 3 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX rows / anchor channels (29
-292) To

-
2 mm slot width, counter trays (GWA / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model Number: BAK 3 Type: BAK3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 823014

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 28 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 161726

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 30 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 704718

NIEDAX - Brand: BAK 38
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX rows / anchor channels (2910-2920) with 11-12 mm slot width, counter trays (GWA / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 34 - 38 mm

NIEDAX model no. BAK 38

Type: BAK38
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 329347

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 34 - 42 mm
Sales unit: 100 pieces
Lieske Part No.: 737035

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized steel according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 1426332

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 40 - 46 mm
Sales unit: 100 pieces
Lieske Part No.: 189504

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 939838

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 984422

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 54 mm
Sales unit: 50 pieces
Lieske Part No.: 538184

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 54 - 58 mm
Sales unit: 50 pieces
Lieske Part No.: 365466

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm
Sales unit: 50 pieces
Lieske Part No.: 968521

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 842157

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 360343

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 76 - 82 mm
Sales unit: 50 pieces
Lieske Part No.: 825966

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 82 - 90 mm
Sales unit: 25 pieces
Lieske Part No.: 422890

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 6 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 472123

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 399330

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 109798

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 1426330

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 705465

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 439482

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 254652

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 3 cables for cable Ø: 28 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 318832

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 28 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 834221

U-clamp, with toothed clamp base, made entirely of aluminum with screw in accordance with DIN EN ISO 1207, for profiles with a thickness of 4-12 mm, can also be used on existing steel structures, counter troughs (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 30 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 318838

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 34 - 38 mm
Sales unit: 100 pieces
Lieske Part No.: 707758

NIEDAX - Make: BF 42
, clamp with serrated Schellenfuß, in galvanized steel pressure tank according to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, for flat irons of 4-12 mm thickness, also applicable to existing steel structures, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 38 - 42 mm NIEDAX Model No.: BF 42nd Type: BF42




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 679829

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 42 - 46 mm
Sales unit: 100 pieces
Lieske Part No.: 187902

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 632672

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 54 mm
Sales unit: 50 pieces
Lieske Part No.: 995946

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 231513

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 8 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 773479

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 593047

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 360354

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 817897

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 52 - 58 mm
Sales unit: 50 pieces
Lieske Part No.: 854387