Installation Material

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized steel according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 1426332

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 40 - 46 mm
Sales unit: 100 pieces
Lieske Part No.: 189504

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 939838

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 984422

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 54 mm
Sales unit: 50 pieces
Lieske Part No.: 538184

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 54 - 58 mm
Sales unit: 50 pieces
Lieske Part No.: 365466

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm
Sales unit: 50 pieces
Lieske Part No.: 968521

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 842157

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 360343

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 76 - 82 mm
Sales unit: 50 pieces
Lieske Part No.: 825966

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 82 - 90 mm
Sales unit: 25 pieces
Lieske Part No.: 422890

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 6 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 472123

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 399330

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 109798

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 1426330

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 705465

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 439482

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 254652

U-clamp, with toothed clamp base, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 3 cables for cable Ø: 28 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 318832

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 28 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 834221

U-clamp, with toothed clamp base, made entirely of aluminum with screw in accordance with DIN EN ISO 1207, for profiles with a thickness of 4-12 mm, can also be used on existing steel structures, counter troughs (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 30 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 318838

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 34 - 38 mm
Sales unit: 100 pieces
Lieske Part No.: 707758

NIEDAX - Make: BF 42
, clamp with serrated Schellenfuß, in galvanized steel pressure tank according to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, for flat irons of 4-12 mm thickness, also applicable to existing steel structures, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 38 - 42 mm NIEDAX Model No.: BF 42nd Type: BF42




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 679829

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 42 - 46 mm
Sales unit: 100 pieces
Lieske Part No.: 187902

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 632672

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 54 mm
Sales unit: 50 pieces
Lieske Part No.: 995946

U-clamp, with toothed clamp base, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 231513

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 8 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 773479

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 593047

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 360354

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 817897

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 52 - 58 mm
Sales unit: 50 pieces
Lieske Part No.: 854387

U-clamp, with toothed clamp base, with plastic pressure tray made of PP, halogen-free, tray insert strip-galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, for flat iron with a thickness of 4-12 mm, can also be used on existing steel structures, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 318846

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 10 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 862032

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 6 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 190930

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 8 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 924918

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 90 - 100 mm
Sales unit: 25 pieces
Lieske Part No.: 513068

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 100 - 110 mm
Sales unit: 25 pieces
Lieske Part No.: 121882

NIEDAX - Make: BK 14
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy: 1 cable for cable diameter: 8 - 14 mm NIEDAX Model No.: BK 14th Type: BK14








Quantity: 1 unit.
Lieske Part No.: 117970

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 972080

NIEDAX - Make: BK 18
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. BK 18

Type: BK18
Quantity: 1 unit.
Lieske Part No.: 134655

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 393581

NIEDAX - Make: BK 22 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: BK 22 Type: BK22 item.
ST.
Lieske Part No.: 885317

NIEDAX - Make: BK 22/2 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameter:
. 8 - 22 mm NIEDAX Model No.: BK 22/2 Type: BK22 / 2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 825932

Hammer foot clamp, with plastic pressure tray, otherwise completely made of aluminum with screw according to DIN EN ISO 1207, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 540439

NIEDAX - Make: BK 26
Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays (GW / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm . NIEDAX Model No.: BK 26 Type: BK26




Quantity: 1 unit.
Lieske Part No.: 168672

Hammer foot clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 644653

NIEDAX - Make: BK 3 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model No.: BK 3 Type: BK3 item.
ST.
Lieske Part No.: 900086

NIEDAX - Make: BK 30/2
Hammerfoot-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels from 2970 to 2980 with 16-17 mm slot width, counter trays ( GW / GWS ...) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameters 26 - 30 mm

NIEDAX model no. BK 30/2 Type: BK30 / 2


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 465771

NIEDAX - Make: BK 34 Hammerfoot-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 3-34 mm NIEDAX model no. BK 34 Type: BK34 item:
ST.
Lieske Part No.: 937843