Installation Material

NIEDAX - Manufacturer: B 14/2 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameters 12 - 14 mm NIEDAX model No.:. B 14/2 E3 Type: B14/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 556878

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 548578

NIEDAX - Manufacturer: B 14 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameters 10 - 14 mm

NIEDAX model no. B 14 AL Type: B14AL


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 625783

NIEDAX - Manufacturer: B 14 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 10 - 14 mm NIEDAX model no. B 14 E3 Type: B14E3




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 156155

NIEDAX - Manufacturer: B 16
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 12 - 16 mm

NIEDAX model no. B 16

Type: B16
Quantity: 1 unit.
Lieske Part No.: 310270

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 570205

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 925836

NIEDAX - Manufacturer: B 18
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. B 18 Type: B18


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 365107

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 318804

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 173159

NIEDAX - Manufacturer: B 18/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameter: 16 - 18 mm

NIEDAX model no. B 18/2 E3

Type: B18/2E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 698779

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 262693

NIEDAX - Manufacturer: B 18 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. B 18 AL Type: B18AL


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 179314

NIEDAX - Manufacturer: B 18 E3
hammer Foot-clamp with pressure trough, completely made ​​of stainless steel, material no 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no B 18 E3 Type: B18E3


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 161213

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 18 - 20 mm
Sales unit: 100 pieces
Lieske Part No.: 783468

NIEDAX - Manufacturer: B 22 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: B 22 Type: B22 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 983724

NIEDAX - Manufacturer: B 22/2
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ... ) and dual sinks (DW. ..) must be ordered separately. For use in the functional integrity please additive regulations! occupancy above the other 2 cables for cable diameters 18 - 22 mm NIEDAX Model No.: B 22 / 2nd Type: B22 / 2








Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 636686

NIEDAX - Manufacturer: B 22/2 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately are.

Occupancy over each other: 2 cable

for cable diameters 18 - 22 mm

NIEDAX model no. B 22/2 AL

Type: B22/2AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 385482

NIEDAX - Manufacturer: B 22/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameters 20 - 22 mm

NIEDAX model no. B 22/2 E3

Type: B22/2E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 390257

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 20 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 814474

NIEDAX - Manufacturer: B 22 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 18 - 22 mm

NIEDAX model no. B 22 AL

Type: B22AL
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 444180

NIEDAX - Manufacturer: B 22 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: B 22 E3 Type: B22E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 882307

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 22 - 24 mm
Sales unit: 100 pieces
Lieske Part No.: 379363

NIEDAX - Manufacturer: B 26
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 22 - 26 mm

NIEDAX model no. B 26 Type: B26


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 376383

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 690895

NIEDAX - Manufacturer: B 26/2 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameters 22 - 26 mm NIEDAX model no. B 26/2 AL Type: B26/2AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 532796

NIEDAX - Manufacturer: B 26/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameter: 24 - 26 mm NIEDAX Model No.: B 26/2 E3. Type: B26/2E3




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 464035

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 24 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 398488

NIEDAX - Manufacturer: B 26 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameters 22 - 26 mm

NIEDAX model no. B 26 AL Type: B26AL


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 330770

NIEDAX - Manufacturer: B 26 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm

NIEDAX model no. B 26 E3

Type: B26E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 447721

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 26 - 28 mm
Sales unit: 100 pieces
Lieske Part No.: 137202

NIEDAX - Manufacturer: B 29
Series clip, made of impact-resistant polystyrene, gray, halogen-free, cylinder head screw M4 x ... according to DIN EN ISO
2 7 and square nut galvanized to DIN ISO 42 or DIN 4 5 96
For NIEDAX C rails 29
, 29
3, 29
4 and 292 with

mm slot width. for cable diameter: 5 - 25mm NIEDAX Model No.: B 29th
Type: B29
Sales unit:
ST.
Lieske Part No.: 800287

NIEDAX - Manufacturer: B 293 Series clip, made ​​of impact-resistant polystyrene, gray, halogen-free, cylinder head screw M4 x ... according to DIN EN ISO
7 and 2 slide nut galvanized to DIN ISO 42 or DIN 4 5 96
, for NIEDAX C rails 29
, 29
3, 29
4 and 292 with mm slot width.

for cable diameter:
3 - 38 mm NIEDAX Model No.: B293 Type: B293 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 803219

NIEDAX - Manufacturer: B 30
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 26 - 30 mm

NIEDAX model no. B 30

Type: B30
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 152640

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 26 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 363742

NIEDAX - Manufacturer: B 3/2 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameter. 26-3 mm NIEDAX Model No.: B 3/2 AL Type: B3 / 2AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 817358

NIEDAX - Manufacturer: B 30/2 E3
hammer Foot-clamp with pressure trough, completely made ​​of stainless steel, material no 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW.. .) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameter: 28 - 30 mm NIEDAX model no.:. B 30/2 E3 Type: B30/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 208460

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 28 - 30 mm
Sales unit: 100 pieces
Lieske Part No.: 720291

NIEDAX - Manufacturer: B 3 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model No.: B 3 AL Type: B3 AL sales unit.
ST.
Lieske Part No.: 710244

NIEDAX - Manufacturer: B 3 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm NIEDAX Model No.: B 3 E3 Type: B3 E3 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 752886

NIEDAX - Manufacturer: B 34
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 30 - 34 mm

NIEDAX model no. B 34

Type: B34
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 178168

NIEDAX - Manufacturer: B 34/2
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ... ) and dual sinks (DW. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy above the other 2 cables for cable diameters 30 - 34 mm NIEDAX model no. B 34/2 Type: B34 / 2






Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 564577

Hammer foot clamp, with pressure pan and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 30 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 890883

NIEDAX - Manufacturer: B 34/2 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameter: 32 - 34 mm NIEDAX model No.:. B 34/2 E3 Type: B34/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 661399

NIEDAX - Manufacturer: B 34 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 30 - 34 mm

NIEDAX model no. B 34 AL

Type: B34AL
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 440172

NIEDAX - Manufacturer: B 34 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 30 - 34 mm

NIEDAX model no. B 34 E3

Type: B34E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 270677

NIEDAX - Manufacturer: B 38 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter: 34 - 38 mm NIEDAX Model No.: B 38 Type: B38 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 768170

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 34 - 38 mm
Sales unit: 50 pieces
Lieske Part No.: 477068

NIEDAX - Manufacturer: B 38/2 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameter: 34 - 38 mm NIEDAX model no. B 38/2 AL Type: B38/2AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 957976

NIEDAX - Manufacturer: B 38/2 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameters 36 - 38 mm NIEDAX model no. B 38/2 E3 Type: B38/2E3 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 960423