Installation Material

Cable gland SKINTOP® MS-M ATEX BRUSH 63X1.5, cable gland, M 63, clamping range (min./max.): 34 - 45 mm, wrench size 1: 67, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in Ex areas, EMC shielding, areas of application: Withstands high chemical and mechanical stress,For device group II, category 2G and 1D,For use on devices, machines and systems with the ignition protection type 'Increased Safety' ('e'),Especially in Ex areas of the chemical and petrochemical industry,For EMC-compliant introduction of copper-shielded cables, Benefits: Approval for the potentially explosive area according to ATEX Directive 2014/34/EU,Safe, quick and uncomplicated installation,Reliable EMC protection guaranteed even after dismantling and reinstallation, as the copper shielding braid is not damaged by the brass brush,Best possible sealing enables protection class IP 68 (10 bar),Optimal EMC protection through unique 360° brass brush, which creates a low-resistance contact between the copper shielding braid and the screw connection
Lieske Part No.: 652904

Cable gland SKINTOP® MS-XL PG 9, cable gland, PG 9, clamping range (min./max.): 4 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 439793

Cable gland SKINTOP® MS-XL PG 11, cable gland, PG 11, clamping range (min./max.): 4 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and equipment engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 439777

Cable gland SKINTOP® MS-XL PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 5 - 12 mm, wrench size 1: 22, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 439784

Cable gland SKINTOP® MS-XL PG 16, cable gland, PG 16, clamping range (min./max.): 8 - 14 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 1231012

Cable gland SKINTOP® MS-XL PG 21, cable gland, PG 21, clamping range (min./max.): 11 - 18 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 439785

Cable gland SKINTOP® MS-XL PG 29, cable gland, PG 29, clamping range (min./max.): 16 - 25 mm, wrench size 1: 40, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 1312345

Sealing ring SKINDICHT® O-RING M12 (9X2) FKM, sealing ring, M 12, inner diameter: 9mm, outer diameter: 13mm, fluororubber, FKM, green, areas of application: For secure sealing to the housing, protection against oil, acids, chemicals on the connection thread of a screw connection, or similar parts under extreme conditions, benefits:
Sales unit: 100 pieces
Lieske Part No.: 440260

Sealing ring SKINDICHT® O-RING M20 (17X2) FKM, sealing ring, M 20, inner diameter: 17mm, outer diameter: 21mm, fluororubber, FKM, green, areas of application: For secure sealing to the housing, protection against oil, acids, chemicals on the connection thread of a screw connection, or similar parts under extreme conditions, benefits:
Sales unit: 100 pieces
Lieske Part No.: 440261

Type: SKINTOP CUBE FRAME 16

Lieske Part No.: 396080

Multiple entry SKINTOP® CUBE FRAME 24, Multiple entry, Number of cable entries: 1, UV-resistant, , Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the SKINTOP® CUBE MODULE quick-release modules, Benefits: Easy installation using 4 fastening screws, UL/CSA certification in accordance with the technical data enables the product to be used in North America, Multiple entry of cables enables higher packing density (up to 10 cables depending on the variant), Integrated flat seal enables secure sealing to the housing when filled (protection class IP 64), Modular system simplifies service work as individual cables can be flexibly replaced without removing the frame from the housing, Available in two sizes for 16- or 24-pin connector mounting cutouts, Made from Robust polyamide (flammability class HB according to UL94 test method for the flammability of plastics)
Lieske Part No.: 887297

Multiple entry SKINTOP® CUBE MODULE 20X20 SMALL, Multiple entry, Number of cable entries: 1, IP 64, UV-resistant, Halogen-free, Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the fixed frame SKINTOP® CUBE FRAME, Benefits: UL/CSA certification in accordance with the technical data enables the product to be used in North America, Quick-release modules are divisible and can therefore be easily clamped around the pre-assembled cable, Modular system simplifies service work, as individual cables can be flexibly replaced by removing the quick-release modules using a screwdriver, Patented sealing system enables protection class IP 64, Vibration-proof locking in the appropriate frame, Available in various sizes, with variable clamping areas for different cable outer diameters as well as clamping areas especially for AS-I bus cables, Made of robust polypropylene (flammability class V-0 according to UL94 test method for the flammability of plastics)
Sales unit: 5 pieces
Lieske Part No.: 928962

Type: SKINTOP CUBE MODULE 20X20 LARGE

Sales unit: 5 pieces
Lieske Part No.: 675369

Type: SKINTOP CUBE MODULE 20X20 BLIND

Sales unit: 5 pieces
Lieske Part No.: 608882

Multiple entry SKINTOP® CUBE MODULE 40X40 SMALL, Multiple entry, Number of cable entries: 1, IP 64, UV-resistant, Halogen-free, Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the fixed frame SKINTOP® CUBE FRAME, Benefits: UL/CSA certification in accordance with the technical data enables the product to be used in North America, Quick-release modules are divisible and can therefore be easily clamped around the pre-assembled cable, Modular system simplifies service work, as individual cables can be flexibly replaced by removing the quick-release modules using a screwdriver, Patented sealing system enables protection class IP 64, Vibration-proof locking in the appropriate frame, Available in various sizes, with variable clamping areas for different cable outer diameters as well as clamping areas especially for AS-I bus cables, Made of robust polypropylene (flammability class V-0 according to UL94 test method for the flammability of plastics)
Sales unit: 5 pieces
Lieske Part No.: 960865

Type: SKINTOP CUBE MODULE 40X40 LARGE

Sales unit: 5 pieces
Lieske Part No.: 634837

Multiple entry SKINTOP® CUBE MODULE 40X40 BLIND, Multiple entry, Number of cable entries: 1, IP 64, UV-resistant, Halogen-free, Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the fixed frame SKINTOP® CUBE FRAME, Benefits: UL/CSA certification in accordance with the technical data enables the product to be used in North America, Quick-release modules are divisible and can therefore be easily clamped around the pre-assembled cable, Modular system simplifies service work, as individual cables can be flexibly replaced by removing the quick-release modules using a screwdriver, Patented sealing system enables protection class IP 64, Vibration-proof locking in the appropriate frame, Available in various sizes, with variable clamping areas for different cable outer diameters as well as clamping areas especially for AS-I bus cables, Made of robust polypropylene (flammability class V-0 according to UL94 test method for the flammability of plastics)
Sales unit: 5 pieces
Lieske Part No.: 860662

Multiple entry SKINTOP® CUBE MODULE 20X20 ASI BUS, Multiple entry, Number of cable entries: 1, IP 64, UV-resistant, Halogen-free, Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the fixed frame SKINTOP® CUBE FRAME, Benefits: UL/CSA certification in accordance with the technical data enables the product to be used in North America, Quick-release modules are divisible and can therefore be easily clamped around the pre-assembled cable, Modular system simplifies service work, as individual cables can be flexibly replaced by removing the quick-release modules using a screwdriver, Patented sealing system enables protection class IP 64, Vibration-proof locking in the appropriate frame, Available in various sizes, with variable clamping ranges for different Cable outer diameter and clamping areas specifically for AS-I bus cables, Made of robust polypropylene (flammability class V-0 according to UL94 test method for the flammability of plastics)
Sales unit: 5 pieces
Lieske Part No.: 464636

Multiple entry SKINTOP® CUBE MULTI VERSION 1, Multiple entry, Number of cable entries: 21, IP 66, IP 65, UV-resistant, Halogen-free, Areas of application: Anywhere where many cables and lines have to be introduced into a housing in a space-saving manner, Control, switch cabinet and apparatus construction, Automation technology, For non-assembled cables and lines as well as media hoses, Benefits: Easy installation of the cables with high packing density, Unused areas remain securely closed and sealed, Large, variable clamping areas thanks to elastic gel technology, Simplifies service work through flexible assembly and disassembly, Optimum strain relief on the entire cable bundle
Lieske Part No.: 1129895

Multiple entry SKINTOP® CUBE MULTI VERSION 2, Multiple entry, Number of cable entries: 23, IP 66, IP 65, UV-resistant, Halogen-free, Areas of application: Anywhere where many cables and lines have to be introduced into a housing in a space-saving manner, Control, switch cabinet and apparatus construction, Automation technology, For non-assembled cables and lines as well as media hoses, Benefits: Simple installation of the cables with high packing density, Unused areas remain securely closed and sealed, Large, variable clamping areas thanks to elastic gel technology, Simplifies service work through flexible assembly and disassembly, Optimum strain relief on the entire cable bundle
Lieske Part No.: 1129894

Multiple entry SKINTOP® CUBE MULTI VERSION1 INCL. FRAME, Multiple entry, Number of cable entries: 21, IP 66, IP 65, UV-resistant, , Areas of application: Anywhere where many cables and lines have to be introduced into a housing in a space-saving manner, Control, switch cabinet and apparatus construction, Automation technology, For non-assembled cables and lines as well as media hoses, Benefits: Easy installation of the cables with high packing density, Unused areas remain securely closed and sealed, Large, variable clamping areas thanks to elastic gel technology, Simplifies service work thanks to flexible assembly and disassembly, Optimum strain relief on the entire cable bundle
Lieske Part No.: 1129893

Multiple entry SKINTOP® CUBE MULTI VERSION2 INCL. FRAME, Multiple entry, Number of cable entries: 23, IP 66, IP 65, UV-resistant, , Areas of application: Anywhere where many cables and lines have to be introduced into a housing in a space-saving manner, Control, switch cabinet and apparatus construction, Automation technology, For non-assembled cables and lines as well as media hoses, Benefits: Easy installation of the cables with high packing density, Unused areas remain securely closed and sealed, Large, variable clamping areas thanks to elastic gel technology, Simplifies service work thanks to flexible assembly and disassembly, Optimum strain relief on the entire cable bundle
Lieske Part No.: 1129892

Multiple entry SKINTOP® MULTI VERSION 1, Multiple entry, Number of cable entries: 22, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Can be used in dry, damp and oily environments, Can be used in rail vehicles in accordance with standards (fire behavior test according to DIN EN 45545, hazard levels HL1 and HL2), Benefits: Multiple entry of cables enables higher packing density (up to 30 cables depending on the variant), Flexibility in the choice of cable diameters reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Large, each 4 mm variable clamping ranges for different cable diameters, Clear marking of the feedthrough points and clamping ranges, thus no potential for errors when inserting the cable, Available in different versions for a wide range of applications, Best possible sealing to the housing and the cables enables protection class IP 68 Unused feedthroughs remain securely closed and sealed, Simple installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1348062

Multiple entry SKINTOP® MULTI VERSION 2, Multiple entry, Number of cable entries: 21, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Can be used in dry, damp and oily environments, Can be used in rail vehicles in accordance with standards (fire behavior test according to DIN EN 45545, hazard levels HL1 and HL2), Benefits: Multiple entry of cables enables higher packing density (up to 30 cables depending on the variant), Flexibility in the choice of cable diameters reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Large, each around 4 mm variable clamping ranges for different cable diameters, Clear marking of the feedthrough points and clamping ranges, thus no potential for errors when inserting the cable, Available in different versions for a wide range of applications, Best possible sealing to the housing and the cables enables protection class IP 68 Unused feedthroughs remain securely closed and sealed, Simple installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1348049

Multiple entry SKINTOP® MULTI VERSION 3, Multiple entry, Number of cable entries: 30, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Can be used in dry, damp and oily environments, Can be used in rail vehicles in accordance with standards (fire behavior test according to DIN EN 45545, hazard levels HL1 and HL2), Benefits: Multiple entry of cables enables higher packing density (up to 30 cables depending on the variant), Flexibility in the choice of cable diameter reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Large, each around 4 mm variable clamping ranges for different cable diameters, Clear marking of the feedthrough points and clamping ranges, thus no potential for errors when inserting the cable, Available in different versions for a wide range of applications, Best possible sealing to the housing and the cables enables protection class IP 68 Unused feedthroughs remain securely closed and sealed, Simple installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1348812

Multiple entry SKINTOP® MULTI VERSION 4, Multiple entry, Number of cable entries: 11, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Can be used in dry, damp and oily environments, Can be used in rail vehicles in accordance with standards (fire behavior test according to DIN EN 45545, hazard levels HL1 and HL2), Benefits: Multiple cable entry enables higher packing density (up to 30 cables depending on the variant), Flexibility in the choice of cable diameters reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Large, each 4 mm variable clamping ranges for different cable diameters, Clear marking of the feedthrough points and clamping ranges, thus no potential for errors when inserting the cable, Available in different versions for a wide range of applications, Best possible sealing to the housing and the cables enables protection class IP 68 Unused feedthroughs remain securely closed and sealed, Simple installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1349336

Multiple entry SKINTOP® MULTI VENT VERSION 3, Multiple entry, Number of cable entries: 29, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Especially for closed housings for optimal ventilation, Can be used in dry, damp and oily environments, Benefits: Multiple entry of cables enables higher packing density (up to 29 cables depending on the variant), Flexibility in the choice of cable diameter reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Clear marking of the feedthrough points and clamping areas, thus no potential for errors when inserting the cable, Large clamping areas, each variable by 4 mm for different cable diameters and clamping areas especially for AS-I bus cables ,Available in different versions for a wide range of applications,Including breathable pressure equalization element, which ensures the necessary pressure equalization when the housing is closed. This completely prevents the ingress of moisture ,Easy installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1003268

Multiple entry SKINTOP® MULTI VERSION 5, Multiple entry, Number of cable entries: 27, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Can be used in dry, damp and oily environments, Can be used in rail vehicles in accordance with standards (fire behavior test according to DIN EN 45545, hazard levels HL1 and HL2), Benefits: Multiple entry of cables enables higher packing density (up to 30 cables depending on the variant), Flexibility in the choice of cable diameters reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Large, each around 4 mm variable clamping ranges for different cable diameters, Clear marking of the feedthrough points and clamping ranges, thus no potential for errors when inserting the cable, Available in different versions for a wide range of applications, Best possible sealing to the housing and the cables enables protection class IP 68 Unused feedthroughs remain securely closed and sealed, Simple installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1895219

Multiple entry SKINTOP® MULTI VERSION 6, Multiple entry, Number of cable entries: 24, IP 68 - 0.1 bar (60 min), IP 67, IP 66, UV-resistant, Halogen-free, Areas of application: For sealing and strain-relieving multiple entry of non-prefabricated cables and media hoses through a housing, Suitable for outdoor use, Can be used in dry, damp and oily environments, Can be used in rail vehicles in accordance with standards (fire behavior test according to DIN EN 45545, hazard levels HL1 and HL2), Benefits: Multiple cable entries enable higher packing density (up to 30 cables depending on the variant), Flexibility in the choice of cable diameters reduces the variety of parts in the warehouse and ensures logistical and cost advantages, Direct cable entry without pre-punching the feedthroughs thanks to elastic gel technology with innovative membrane technology, Large, each around 4 mm variable clamping ranges for different cable diameters, Clear marking of the feedthrough points and clamping ranges, thus no potential for errors when inserting the cable, Available in different versions for a wide range of applications, Best possible sealing to the housing and the cables enables protection class IP 68 Unused feedthroughs remain securely closed and sealed, Simple installation of the multiple entry on the housing using 4 fastening screws The adhesive effect of the sealing gel enables very easy positioning of the product during assembly
Lieske Part No.: 1055589

Sealing ring SKINDICHT® O-RING PG 7 (10X1.5) NBR, sealing ring, PG 7, inner diameter: 10mm, outer diameter: 13mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 440259

Sealing ring SKINDICHT® O-RING PG 11 (16X1.5) NBR, sealing ring, PG 11, inner diameter: 16mm, outer diameter: 19mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 1230929

Sealing ring SKINDICHT® O-RING PG 16 (20X1.5) NBR, sealing ring, PG 16, inner diameter: 20mm, outer diameter: 23mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 436188

Sealing ring SKINDICHT® O-RING PG 29 (34X2) NBR, sealing ring, PG 29, inner diameter: 34mm, outer diameter: 38mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 50 pieces
Lieske Part No.: 440256

Sealing ring SKINDICHT® O-RING PG 42 (50X2) NBR, sealing ring, PG 42, inner diameter: 50mm, outer diameter: 54mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 50 pieces
Lieske Part No.: 440257

Cable gland SKINTOP® ST PG 7 RAL 7001 SGY, cable gland, PG 7, clamping range (min./max.): 2.5 - 6.5 mm, wrench size 1: 15, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 475504

Cable gland SKINTOP® ST PG 9 RAL 7001 SGY, cable gland, PG 9, clamping range (min./max.): 3.5 - 8 mm, wrench size 1: 19, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 981488

Cable gland SKINTOP® ST PG 11 RAL 7001 SGY, cable gland, PG 11, clamping range (min./max.): 4 - 10 mm, wrench size 1: 22, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 839964

Cable gland SKINTOP® ST PG 13.5 RAL 7001 SGY, cable gland, PG 13.5, clamping range (min./max.): 6 - 12 mm, wrench size 1: 24, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be introduced into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 561507

Cable gland SKINTOP® ST PG 16 RAL 7001 SGY, cable gland, PG 16, clamping range (min./max.): 9 - 14 mm, wrench size 1: 27, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 888761

Cable gland SKINTOP® ST PG 21 RAL 7001 SGY, cable gland, PG 21, clamping range (min./max.): 13 - 18 mm, wrench size 1: 33, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 319804

Cable gland SKINTOP® ST PG 29 RAL 7001 SGY, cable gland, PG 29, clamping range (min./max.): 14 - 25 mm, wrench size 1: 42, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Lieske Part No.: 594518

Cable gland SKINTOP® ST PG 36 RAL 7001 SGY, cable gland, PG 36, clamping range (min./max.): 24 - 32 mm, wrench size 1: 53, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 10 pieces
Lieske Part No.: 122573

Cable gland SKINTOP® ST PG 42 RAL 7001 SGY, cable gland, PG 42, clamping range (min./max.): 35 - 38 mm, wrench size 1: 60, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 5 pieces
Lieske Part No.: 215451

Cable gland SKINTOP® ST PG 48 RAL 7001 SGY, cable gland, PG 48, clamping range (min./max.): 39 - 44 mm, wrench size 1: 65, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 5 pieces
Lieske Part No.: 234118

Cable gland SKINTOP® STR PG 7 RAL 7001 SGY, cable gland, PG 7, clamping range (min./max.): 1.5 - 5 mm, wrench size 1: 15, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 278499

Cable gland SKINTOP® STR PG 9 RAL 7001 SGY, cable gland, PG 9, clamping range (min./max.): 2 - 6 mm, wrench size 1: 19, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 233157

Cable gland SKINTOP® STR PG 11 RAL 7001 SGY, cable gland, PG 11, clamping range (min./max.): 2 - 7 mm, wrench size 1: 22, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 686914

Cable gland SKINTOP® STR PG 13.5 RAL 7001 SGY, cable gland, PG 13.5, clamping range (min./max.): 4 - 9 mm, wrench size 1: 24, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be introduced into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 238569

Cable gland SKINTOP® STR PG 16 RAL 7001 SGY, cable gland, PG 16, clamping range (min./max.): 6 - 12 mm, wrench size 1: 27, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for greater functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 822376

Cable gland SKINTOP® STR PG 21 RAL 7001 SGY, cable gland, PG 21, clamping range (min./max.): 9 - 16 mm, wrench size 1: 33, silver grey, IP 68 - 5 bar (30 min), , Areas of application: Wherever many cables and lines have to be inserted into a housing in a space-saving manner, photovoltaics, mechanical and equipment engineering, automation technology, Benefits: Increased oil resistance for higher functional reliability, permanent vibration protection, optimal strain relief, wide range of accessories (e.g. multiple sealing inserts), large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 173716