Installation Material

SKINDICHT® ME PG 13.5/16 extension, internal thread: PG 16, external thread: PG 13.5, nickel-plated brass, , Application areas: housings, devices, industrial connectors, machines, Benefits: Enables the use of cable glands whose connection threads are larger than existing threaded holes
Sales unit: 100 pieces
Lieske Part No.: 438926

SKINDICHT® ME PG 16/21 extension, internal thread: PG 21, external thread: PG 16, nickel-plated brass, , Application areas: housings, devices, industrial connectors, machines, Benefits: Enables the use of cable glands whose connection threads are larger than existing threaded holes
Sales unit: 50 pieces
Lieske Part No.: 433939

SKINDICHT® ME PG 21/29 extension, internal thread: PG 29, external thread: PG 21, nickel-plated brass, , Application areas: housings, devices, industrial connectors, machines, Benefits: Enables the use of cable glands whose connection threads are larger than existing threaded holes
Sales unit: 50 pieces
Lieske Part No.: 433942

SKINDICHT® ME PG 29/36 extension, internal thread: PG 36, external thread: PG 29, nickel-plated brass, , Application areas: housings, devices, industrial connectors, machines, Benefits: Enables the use of cable glands whose connection threads are larger than existing threaded holes
Sales unit: 50 pieces
Lieske Part No.: 438927

Angle cable gland SKINDICHT® RWV PG 7, Angle cable gland, PG 7, Clamping range (min./max.): 5 - 5 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle screw connections are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Reduction in height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 25 pieces
Lieske Part No.: 773504

Angle cable gland SKINDICHT® RWV PG 9, Angle cable gland, PG 9, Clamping range (min./max.): 5 - 8 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant construction, Mechanical and equipment construction, Benefits: Reduction in height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 25 pieces
Lieske Part No.: 720960

Angle cable gland SKINDICHT® RWV PG 11, Angle cable gland, PG 11, Clamping range (min./max.): 7 - 10 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant construction, Mechanical and equipment construction, Benefits: Reduction in height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 25 pieces
Lieske Part No.: 212410

Angle cable gland SKINDICHT® RWV PG 13.5, Angle cable gland, PG 13.5, Clamping range (min./max.): 7 - 13 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant construction, Mechanical and equipment construction, Benefits: Reduction in height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 25 pieces
Lieske Part No.: 894653

Angle cable gland SKINDICHT® RWV PG 16, Angle cable gland, PG 16, Clamping range (min./max.): 8 - 16 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle screw connections are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant construction, Mechanical and equipment construction, Benefits: Reduction in height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 10 pieces
Lieske Part No.: 162453

Cable gland SKINDICHT® SK PG 9, cable gland, PG 9, clamping range (min./max.): 6 - 12 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, Benefits: reliable strain relief, large clamping range
Sales unit: 50 pieces
Lieske Part No.: 1230922

Cable gland SKINDICHT® SK PG 11, cable gland, PG 11, clamping range (min./max.): 7 - 15 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, benefits: reliable strain relief, large clamping range
Sales unit: 50 pieces
Lieske Part No.: 184406

Cable gland SKINDICHT® SK PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 12 - 16 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, Benefits: reliable strain relief, large clamping range
Sales unit: 25 pieces
Lieske Part No.: 1231226

Cable gland SKINDICHT® SK PG 16, cable gland, PG 16, clamping range (min./max.): 13 - 18 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, Benefits: reliable strain relief, large clamping range
Sales unit: 25 pieces
Lieske Part No.: 626816

Cable gland SKINDICHT® SK PG 21, cable gland, PG 21, clamping range (min./max.): 15 - 23 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, Benefits: reliable strain relief, large clamping range
Sales unit: 25 pieces
Lieske Part No.: 1230923

Cable gland SKINDICHT® SKZ PG 9, cable gland, PG 9, clamping range (min./max.): 5 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 439599

Cable gland SKINDICHT® SKZ PG 11, cable gland, PG 11, clamping range (min./max.): 7 - 12.5 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bar strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 1230921

Cable gland SKINDICHT® SKZ PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 7 - 16 mm, wrench size 1: 22, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bar strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 25 pieces
Lieske Part No.: 568462

Cable gland SKINDICHT® SKZ PG 16, cable gland, PG 16, clamping range (min./max.): 8 - 16 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 25 pieces
Lieske Part No.: 439593

Cable gland SKINDICHT® SKZ PG 21, cable gland, PG 21, clamping range (min./max.): 11 - 20 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 25 pieces
Lieske Part No.: 665810

Cable gland SKINDICHT® SHVE PG 13/13/11/7, cable gland, PG 13.5, clamping range (min./max.): 8.5 - 10.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 1230926

Cable gland SKINDICHT® SHVE PG 16/16/15/11, cable gland, PG 16, clamping range (min./max.): 12 - 14.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439490

Cable gland SKINDICHT® SHVE PG 21/21/18/14, cable gland, PG 21, clamping range (min./max.): 15.8 - 17.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439492

Cable gland SKINDICHT® SHVE PG 21/21/20/16, cable gland, PG 21, clamping range (min./max.): 17.5 - 19.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439494

Cable gland SKINDICHT® SRE PG 36/36/30/24, cable gland, PG 36, clamping range (min./max.): 27 - 30 mm, wrench size 1: 50, nickel-plated brass, UV-resistant, IP 65, EMC shielding, areas of application: earthing cable gland with additional kink protection areas of application wherever electrical interference fields can occur, production lines, conveyor and transport systems, measurement, control and regulation technology, moving machine parts, benefits: perfect sealing with kink protection, optimal, low-resistance 360° shield contact, high protection class, cable-friendly strain relief, gentle clamping of the cable
Sales unit: 5 pieces
Lieske Part No.: 1231133

Angle cable gland SKINDICHT® RWV PG 21, Angle cable gland, PG 21, Clamping range (min./max.): 11 - 20 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Reduction in installation height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 10 pieces
Lieske Part No.: 137734

Flat cable gland SKINDICHT® SVFK PG 16, Flat cable gland, PG 16, Flat cable width (min./max.) 0.0 - 15.0 mm, Flat cable height (min./max.) 0.0 - 5.0 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 456465

Cable gland SKINDICHT® SVF PG 21, cable gland, PG 21, flat cable width (min./max.) 9.0 - 21.0 mm, flat cable height (min./max.) 3.0 - 8.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 436463

Cable gland SKINDICHT® SVF PG 29, cable gland, PG 29, flat cable width (min./max.) 14.0 - 30.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load-bearing capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 504445

Cable gland SKINDICHT® SVF PG 36, cable gland, PG 36, flat cable width (min./max.) 24.0 - 40.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 436464

Cable gland SKINDICHT® SVF PG 42, cable gland, PG 42, flat cable width (min./max.) 29.0 - 45.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 439902

Cable gland SKINDICHT® SVF PG 48, cable gland, PG 48, flat cable width (min./max.) 34.0 - 50.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 554331

Cable gland SKINDICHT® SVRE PG 9, cable gland, PG 9, clamping range (min./max.): 5 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 54, , Areas of application: Cable gland made of brass with hexagonal intermediate socket and variable cut-in sealing ring, Benefits: Fewer sizes in stock, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 100 pieces
Lieske Part No.: 2013374

Cable gland SKINDICHT® SVRE PG 48, cable gland, PG 48, clamping range (min./max.): 40.5 - 47 mm, wrench size 1: 64, nickel-plated brass, UV-resistant, IP 54, , Areas of application: Cable gland made of brass with hexagonal intermediate socket and variable cut-in sealing ring, Benefits: Fewer sizes in stock, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 10 pieces
Lieske Part No.: 439923

Cable gland SKINDICHT® SKZ PG 29, cable gland, PG 29, clamping range (min./max.): 19 - 31 mm, wrench size 1: 40, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 10 pieces
Lieske Part No.: 439594

Cable gland SKINDICHT® SHZ PG 7, cable gland, PG 7, clamping range (min./max.): 5 - 5 mm, wrench size 1: 14, nickel-plated brass, halogen-free, UV-resistant, IP 55, , Areas of application: Brass compact screw connection for stable strain relief, solid, for large cable cross-sections, Benefits: For cables and lines with a large outer diameter, Robust, High strain relief, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 439534

Cable gland SKINDICHT® SHZ PG 42, cable gland, PG 42, clamping range (min./max.): 30 - 42.5 mm, wrench size 1: 57, nickel-plated brass, halogen-free, UV-resistant, IP 55, , Areas of application: Brass compact screw connection for stable strain relief, solid, for large cable cross-sections, Benefits: For cables and lines with a large outer diameter, Robust, High strain relief, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 5 pieces
Lieske Part No.: 1231213

Flat cable gland SKINDICHT® SVFK PG 21, Flat cable gland, PG 21, Flat cable width (min./max.) 10.0 - 20.5 mm, Flat cable height (min./max.) 3.0 - 8.0 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 439908

Flat cable gland SKINDICHT® SVFK PG 29, Flat cable gland, PG 29, Flat cable width (min./max.) 15.0 - 27.0 mm, Flat cable height (min./max.) 4.0 - 11.5 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 439919

Flat cable gland SKINDICHT® SVFK PG 36, Flat cable gland, PG 36, Flat cable width (min./max.) 25.0 - 34.0 mm, Flat cable height (min./max.) 4.0 - 11.5 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 523885

Sealing ring SKINDICHT® O-RING PG 13.5 (18X1.5) NBR, sealing ring, PG 13.5, inner diameter: 18mm, outer diameter: 21mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 440254

Sealing ring SKINDICHT® O-RING PG 21 (26X2) NBR, sealing ring, PG 21, inner diameter: 26mm, outer diameter: 30mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 1312325

Incision sealing ring SKINDICHT® E PG 9 INCISED SEAL, incision sealing ring, PG 9, inner diameter: 5.0mm8.0mm, chloroprene rubber, black, areas of application: incision sealing ring for SKINDICHT® cable glands, benefits: easy breaking out of the various incisions, one seal for different clamping areas
Sales unit: 250 pieces
Lieske Part No.: 438912

Incision sealing ring SKINDICHT® E PG 42 INCISED SEAL, incision sealing ring, PG 42, inner diameter: 30.0mm35.5mm39.0mm42.5mm46.0mm, chloroprene rubber, black, areas of application: incision sealing ring for SKINDICHT® cable glands, benefits: easy breaking out of the various incisions, one seal for different clamping areas
Sales unit: 50 pieces
Lieske Part No.: 1312271

Hose screw connection SILVYN® USK PG 9 SGY, Hose screw connection, PG 9, Nominal size: 14, Suitable for protective hose size: 14, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications,Light mechanical stress,SILVYN® SP/SP-PU,In combination with cable protection hose:,SILVYN® FPS/ FD-PU, Benefits: No additional screw parts required,Vibration protection,Quick and easy installation
Sales unit: 50 pieces
Lieske Part No.: 1312273

Hose screw connection SILVYN® USK PG 11 SGY, Hose screw connection, PG 11, Nominal size: 17, Suitable for protective hose size: 17, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications, Light mechanical stress, SILVYN® SP/SP-PU, In combination with cable protection hose:, SILVYN® FPS/ FD-PU, Benefits: No additional screw parts required, Vibration protection, Quick and easy installation
Sales unit: 50 pieces
Lieske Part No.: 968154

Hose screw connection SILVYN® USK PG 13.5 SGY, Hose screw connection, PG 13.5, Nominal size: 19, Suitable for protective hose size: 19, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications, Light mechanical stress, SILVYN® SP / SP-PU, In combination with cable protection hose:, SILVYN® FPS / FD-PU, Benefits: No additional screw parts required, Vibration protection, Quick and easy installation
Sales unit: 50 pieces
Lieske Part No.: 201224

Hose screw connection SILVYN® USK PG 16 SGY, Hose screw connection, PG 16, Nominal size: 21, Suitable for protective hose size: 21, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications, Light mechanical stress, SILVYN® SP/SP-PU, In combination with cable protection hose:, SILVYN® FPS/ FD-PU, Benefits: No additional screw parts required, Vibration protection, Quick and easy installation
Sales unit: 50 pieces
Lieske Part No.: 771735

Hose screw connection SILVYN® USK PG 21 SGY, Hose screw connection, PG 21, Nominal size: 27, Suitable for protective hose size: 27, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications, Light mechanical stress, SILVYN® SP/SP-PU, In combination with cable protection hose:, SILVYN® FPS/ FD-PU, Benefits: No additional screw parts required, Vibration protection, Quick and easy installation
Sales unit: 25 pieces
Lieske Part No.: 438556

Hose screw connection SILVYN® USK PG 29 SGY, Hose screw connection, PG 29, Nominal size: 36, Suitable for protective hose size: 36, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications, Light mechanical stress, SILVYN® SP/SP-PU, In combination with cable protection hose:, SILVYN® FPS/ FD-PU, Benefits: No additional screw parts required, Vibration protection, Quick and easy installation
Sales unit: 25 pieces
Lieske Part No.: 440186

Hose screw connection SILVYN® USK PG 36 SGY, Hose screw connection, PG 36, Nominal size: 45, Suitable for protective hose size: 45, Polypropylene, Halogen-free, IP 54, , Areas of application: Indoor applications, Light mechanical stress, SILVYN® SP/SP-PU, In combination with cable protection hose:, SILVYN® FPS/ FD-PU, Benefits: No additional screw parts required, Vibration protection, Quick and easy installation
Sales unit: 25 pieces
Lieske Part No.: 1583531