Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 14 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 2 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 31 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 423 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 11 )
- Technology ➤ Tools ➤ Punches ( 119 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 24 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 3 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 Klauke IS505Klauke IS505 press insert K50 4-6qmm for insulated cable connector oval pressingSuitable for insulated cable connections, single crimping. 4 - 6 mm², Series 50 Lieske Part No.: 470670 Mfg Part No: IS505 |
119,99 EUR
 ≈ £102.47 | ≈ $136.55
Delivery time on requestinfo_outline
|
 |
Klauke IS5071Klauke IS5071 Inductive sensor, Rectangular, plastics For insulated cable connectors. Lieske Part No.: 798780 Mfg Part No: IS5071 |
75,44 EUR
≈ £64.43 | ≈ $85.85
Delivery time on requestinfo_outline
|
 |
KLAUKE IS5072 IS5072KLAUKE IS5072 Presseinsatz Serie 50, Geeignet für Isolierte Kabelverbindungen. Einzelpressung. Verkaufseinheit: 1 ST. Lieske Part No.: 688892 Mfg Part No: IS5072 |
179,98 EUR 182,02 EUR
≈ £153.70 | ≈ $204.82
Delivery time on requestinfo_outline
|
 |
Klauke ISQ2210Klauke ISQ2210 press insert 10qmm , insulated terminal Crimping insert ISQ 22, 10 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 728421 Mfg Part No: ISQ2210 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke ISQ2216Klauke ISQ2216 press insert 16qmm , insulated terminal Crimping insert ISQ 22, 16 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 362478 Mfg Part No: ISQ2216 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke ISQ2225Klauke ISQ2225 press insert 25qmm , insulated terminal Crimping insert ISQ 22, 25 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 466797 Mfg Part No: ISQ2225 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke ISQ2235Klauke ISQ2235 press insert 35qmm , insulated terminal Crimping insert ISQ 22, 35 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 113714 Mfg Part No: ISQ2235 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke ISQ2250Klauke ISQ2250 press insert 50qmm , insulated terminal Crimping insert ISQ 22, 50 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 183546 Mfg Part No: ISQ2250 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke ISQ2270Klauke ISQ2270 press insert 70qmm , insulated terminal Crimping insert ISQ 22, 70 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 630248 Mfg Part No: ISQ2270 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke K02Klauke K02 crimping pliers 0,75-16 mm ², Ideal pressing tool with spring-assisted tool opening. For tubular cable lugs and connectors for solid conductors. With locking device for evenly controlled pressing results. Exact cross-section ... Lieske Part No.: 563747 Mfg Part No: K02 |
173,05 EUR
≈ £147.78 | ≈ $196.93
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Klauke K05Klauke K05 crimping pliers 6-50 mm ², Dies without locking device for non-insulated cable links Hexagonal crimping is required with built-in revolving dies, so no replacing d jaws. Design: Cross sections for 6 mm ² 50, length 390 ... Lieske Part No.: 244585 Mfg Part No: K05 |
329,08 EUR
≈ £281.03 | ≈ $374.49
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Klauke K05DKlauke K05D crimping pliers 6-50 mm ², Pressing tool for compression cable lugs and connectors, DIN 46235/DIN 46267 Part 1 6-50 mm². Effort-saving and low-maintenance mechanical drive. With rotating profile discs. Exact cross-section ... Lieske Part No.: 781963 Mfg Part No: K05D |
329,08 EUR
≈ £281.03 | ≈ $374.49
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
|
|
KLAUKE K05WF50 K05WF50KLAUKE K05WF50 pressing tool 25-50 mm² Hand tool for crimping wire end ferrules of 25 - 50 mm² and twin wire end ferrules 2x16 mm². Easy to use thanks to the supporting pre-clamping lever. Double the crimping width - 50% fewer crimps ... Lieske Part No.: 684105 Mfg Part No: K05WF50 |
290,22 EUR
≈ £247.85 | ≈ $330.27
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
|
|
KLAUKE K05WF95 K05WF95KLAUKE K05WF95 pressing tool 50-95 mm² Hand tool for crimping wire end ferrules from 50 - 95 mm². Easy to use thanks to the supporting pre-clamping lever. Double the crimping width - 50% fewer crimps required. Square crimp: optimal fit ... Lieske Part No.: 684107 Mfg Part No: K05WF95 |
290,22 EUR
≈ £247.85 | ≈ $330.27
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Klauke K06Klauke K06 crimp tool 10-120 sq mm, Dies without locking device for non-insulated cable links Hexagonal crimping is required with built-in revolving dies, so no replacing d jaws. Design: Cross sections for 10 120 sq mm, length ... Lieske Part No.: 188562 Mfg Part No: K06 |
397,29 EUR
≈ £339.29 | ≈ $452.12
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Klauke K06DKlauke K06D pressing tool 6-120qmm for non-insulated cable connections Energy-saving and maintenance-free mechanical drive. With rotating profile discs. Exact cross-section assignment through permanent marking on the profile discs. For DIN compression cable lugs and ... Lieske Part No.: 352555 Mfg Part No: K06D |
397,29 EUR
≈ £339.29 | ≈ $452.12
Delivery time on requestinfo_outline
|
 |
Klauke K09Klauke K09 crimp tool 25-150 sq mm, Dies without locking device for non-insulated cable connections hexagonal compression with built revolving dies, so no replacement required d cheek plates. Design: Cross sections for 25 5 sq mm, ... Lieske Part No.: 500714 Mfg Part No: K09 |
437,18 EUR
≈ £373.35 | ≈ $497.51
Delivery time on requestinfo_outline
|
 |
KLAUKE K09DKLAUKE K09D Mechanical crimping tool for cable lugs 25-150qmm Pressing tool for compression cable lugs and connectors DIN 46235/DIN 46267 Part 1, 25-150mm². Effort-saving and low-maintenance mechanical drive. With rotating profile discs. Exact cross-section ... Lieske Part No.: 816283 Mfg Part No: K09D |
437,18 EUR
≈ £373.35 | ≈ $497.51
Delivery time on requestinfo_outline
|
 |
Klauke K100Klauke K100 hand cable cutter up to 14 mm, Type: K100 Sales unit: 1 pc Lieske Part No.: 755113 Mfg Part No: K100 |
101,28 EUR
≈ £86.49 | ≈ $115.26
Delivery time on requestinfo_outline
|
 |
Klauke K1011Klauke K1011 hand cable cutter , mechanically D 26 mm Type: K1011 Sales unit: 1 pc Lieske Part No.: 210570 Mfg Part No: K1011 |
168,00 EUR
≈ £143.47 | ≈ $191.18
Delivery time on requestinfo_outline
|
 |
Klauke K1011E K1011EKlauke K1011E Cable cutter head to K1011/K2011/K1051 Replacement cutting head K / E match the cable cutters: K / , K 2 / , K 5 / Type: K E item: ST. Lieske Part No.: 756200 Mfg Part No: K1011E |
101,28 EUR
≈ £86.49 | ≈ $115.26
Delivery time on requestinfo_outline
|
 |
Klauke K1012 K1012Klauke K1012 hand cable cutter up to 38 mm, Hand cable cutter K / 2 cutting range up to 38 mm for AL-Cu Cable Type: K 2 Quantity: ST. Lieske Part No.: 829943 Mfg Part No: K1012 |
228,29 EUR
≈ £194.96 | ≈ $259.79
Delivery time on requestinfo_outline
|
 |
Klauke K1012E K1012EKlauke K1012E Cable cutter head to K1012, Replacement cutting head K101/2E match the cable cutter: K 101/2 Type: K1012E Quantity: 1 unit. Lieske Part No.: 449232 Mfg Part No: K1012E |
156,92 EUR
≈ £134.01 | ≈ $178.57
Delivery time on requestinfo_outline
|
 |
Klauke K102Klauke K102 hand cable cutter up to 20 mm, Hand Cable Cutter K 2 for fine stranded conductors cutting range: max. Ø 2 mm Length: 2 mm Weight: 35 g Type: K 2 Quantity: ST. Lieske Part No.: 927751 Mfg Part No: K102 |
87,91 EUR
≈ £75.08 | ≈ $100.04
Delivery time on requestinfo_outline
|