Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 14 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 2 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 31 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 423 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 11 )
- Technology ➤ Tools ➤ Punches ( 119 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 24 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 3 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 Klauke ESGM452CFM ESGM452CFMKlauke ESGM452CFM Akkuhydraulisches Schneidwerkzeug ACSR bis 45mm MakitaAkkuhydraulisches Schneidwerkzeug bis 45mm zum Schneiden von Al/St-Leitungen (ACSR), Rundmaterialen (Cu, Al, Stahl) sowie armierten Leitungen und Bewehrungsstahl bis 14mm, Integriertes ... Lieske Part No.: 1301806 Mfg Part No: ESGM452CFM |
4.212,00 EUR
 ≈ £3,597.05 | ≈ $4,793.26
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM25CFB ESM25CFBKlauke ESM25CFB battery-powered hydraulic cutting tool next gen. Bosch battery D=25mm ESM 25 Battery-operated hydraulic cutting tool Ø 25 mm, for cutting Al/St cables (ACSR), round materials (Cu, Al) as well as armored cables, as well as guy wires (stay wire), protected cutting ... Lieske Part No.: 1598540 Mfg Part No: ESM25CFB |
2.985,12 EUR
≈ £2,549.29 | ≈ $3,397.07
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM25CFM ESM25CFMKlauke ESM25CFM battery-powered hydraulic cutting tool next gen. Bosch battery D=25mm ESM 25 Battery-operated hydraulic cutting tool Ø 25 mm, for cutting Al/St cables (ACSR), round materials (Cu, Al) as well as armored cables, as well as guy wires (stay wire), protected cutting ... Lieske Part No.: 1598539 Mfg Part No: ESM25CFM |
2.985,12 EUR
≈ £2,549.29 | ≈ $3,397.07
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM25ISM ESM25ISMKlauke ESM25ISM VDE cordless hydraulic cutting tool D=25mm 1000V VDE battery-operated hydraulic cutting tool, housing in signal orange for easy differentiation from standard tools, insulated and VDE-certified up to 1000 V for increased safety when working on ... Lieske Part No.: 1598543 Mfg Part No: ESM25ISM |
3.258,36 EUR
≈ £2,782.64 | ≈ $3,708.01
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM35CFB ESM35CFBKlauke ESM35CFB battery-powered hydraulic cutting tool next gen. Bosch battery D=35mm ESM 35 Cordless hydraulic cutting tool Ø 35 mm for copper and aluminum cables, protected cutting mechanism, cutting of copper and aluminum cables, all cable classes 1, 2, 5 and 6, all tool data at a ... Lieske Part No.: 1598523 Mfg Part No: ESM35CFB |
2.388,96 EUR
≈ £2,040.17 | ≈ $2,718.64
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM35CFM ESM35CFMKlauke ESM35CFM cordless hydraulic cutting tool Makita battery D=35mm ESM 35 Cordless hydraulic cutting tool Ø 35 mm for copper and aluminum cables, protected cutting mechanism, cutting of copper and aluminum cables, all cable classes 1, 2, 5 and 6, all tool data at a ... Lieske Part No.: 1598537 Mfg Part No: ESM35CFM |
2.388,96 EUR
≈ £2,040.17 | ≈ $2,718.64
Delivery time on requestinfo_outline
|
|
|
KLAUKE ESM35ISB ESM35ISBKLAUKE ESM35ISB Vde-Akkuhydraulisches Schneidwerkzeug Bos VDE-Akkuhydraulisches Schneidwerkzeug Ø 35 mm für Kupfer- und Aluminiumkabel, geschützte Schneidmechanik, Schneiden von Kupfer- und Aluminium-Kabeln, alle Kabelklassen 1, 2, 5 und 6. Isoliert nach ... Lieske Part No.: 831476 Mfg Part No: ESM35ISB |
2.622,24 EUR
≈ £2,239.39 | ≈ $2,984.11
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM35ISM ESM35ISMKlauke ESM35ISM VDE cordless hydraulic cutting tool D=35mm 1000V VDE battery-operated hydraulic cutting tool, housing in signal orange for easy differentiation from standard tools, insulated and VDE-certified up to 1000 V for increased safety when working on ... Lieske Part No.: 1598542 Mfg Part No: ESM35ISM |
2.622,24 EUR
≈ £2,239.39 | ≈ $2,984.11
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM50CFB ESM50CFBKlauke ESM50CFB cutting tool Bosch up to 50mm cordless hydraulic Lieske Part No.: 1089298 Mfg Part No: ESM50CFB |
2.907,36 EUR
≈ £2,482.89 | ≈ $3,308.58
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM50CFM ESM50CFMKlauke ESM50CFM cutting tool Makita up to 50mm cordless hydraulic Lieske Part No.: 1089264 Mfg Part No: ESM50CFM |
2.907,36 EUR
≈ £2,482.89 | ≈ $3,308.58
Delivery time on requestinfo_outline
|
|
|
KLAUKE ESM50ISB ESM50ISBKLAUKE ESM50ISB Vde-Akkuhydraulisches Schneidwerkzeug Bos VDE-Akkuhydraulisches Schneidwerkzeug Ø 50 mm für Kupfer- und Aluminiumkabel (auch feindrähtig). Isoliert nach IEC 60900 bis 1000 V. Sehr hohe Schneidkapazität dank innovativer Schneidengeometrie. Lieske Part No.: 831478 Mfg Part No: ESM50ISB |
3.099,60 EUR
≈ £2,647.06 | ≈ $3,527.34
Delivery time on requestinfo_outline
|
 |
KLAUKE ESM50ISM ESM50ISMKlauke ESM50ISM VDE cordless hydraulic cutting tool D=50mm 1000V VDE battery-operated hydraulic cutting tool Ø 50 mm for copper and aluminum cables (also fine-stranded). Very high cutting capacity thanks to innovative cutting geometry. All tool data at a glance ... Lieske Part No.: 1598541 Mfg Part No: ESM50ISM |
3.099,60 EUR
≈ £2,647.06 | ≈ $3,527.34
Delivery time on requestinfo_outline
|
 |
Klauke ESSG105LKlauke ESSG105L safety cutter, battery 18V LI-LION max.D105mm BG-tested safety cutting device for cutting Cu/Al cables without steel reinforcement that are live in the event of a fault with a nominal voltage of up to 60 kV. Single-core cables without steel ... Lieske Part No.: 158288 Mfg Part No: ESSG105L |
7.135,56 EUR
≈ £6,093.77 | ≈ $8,120.27
Delivery time on requestinfo_outline
|
 |
Klauke ESSGG85LKlauke ESSGG85L safety cutter, battery 18V LI-ION max.D85mm BG-tested safety cutting device for cutting Cu/Al cables without steel reinforcement that are live in the event of a fault with a nominal voltage of up to 60 kV. Single-core cables without steel ... Lieske Part No.: 158287 Mfg Part No: ESSGG85L |
6.978,96 EUR
≈ £5,960.03 | ≈ $7,942.06
Delivery time on requestinfo_outline
|
 |
KLAUKE F2210KLAUKE F2210 pressing insert 10sqmm , Crimping insert F 22, 10 mm², series 22. Suitable for tubular cable lugs and connectors for fine-stranded conductors. Lieske Part No.: 201985 Mfg Part No: F2210 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
KLAUKE F2216Klauke F2216 press insert K22er 16sqmm for tubular cable lugs/connectors Crimping insert F 22, 16 mm², series 22. Suitable for tubular cable lugs and connectors for fine-stranded conductors. Lieske Part No.: 371134 Mfg Part No: F2216 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
KLAUKE F2225KLAUKE F2225 pressing insert 25qmm , Crimping insert F 22, 25 mm², series 22. Suitable for tubular cable lugs and connectors for fine-stranded conductors. Lieske Part No.: 960296 Mfg Part No: F2225 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
|
|
Klauke F2235Klauke F2235 pressing insert 35 sq mm , for fine stranded conductors Crimping insert F 22, 35 mm², series 22. Suitable for tubular cable lugs and connectors for fine-stranded conductors. Lieske Part No.: 824503 Mfg Part No: F2235 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
KLAUKE F2250KLAUKE F2250 pressing insert 50qmm , K22Er series Crimping insert F 22, 50 mm², series 22. Suitable for tubular cable lugs and connectors for fine-stranded conductors. Lieske Part No.: 840446 Mfg Part No: F2250 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
KLAUKE F2270Klauke F2270 press insert K22er 70sqmm for pipe cable lugs/connectors Crimping insert F 22, 70 mm², series 22. Suitable for tubular cable lugs and connectors for fine-stranded conductors. Lieske Part No.: 444569 Mfg Part No: F2270 |
228,39 EUR
≈ £195.05 | ≈ $259.91
Delivery time on requestinfo_outline
|
 |
Klauke FHP2Klauke FHP2 Hydraulic Foot Pump , Type: FHP2 Sales unit: 1 pc Lieske Part No.: 165263 Mfg Part No: FHP2 |
2.320,92 EUR
≈ £1,982.07 | ≈ $2,641.21
Delivery time on requestinfo_outline
|
|
|
KLAUKE FTA1 FTA1KLAUKE FTA1 Fußschalter f.elektrohydraulische Pumpe EHP2-4 u.HK12/2EL Anschlusskabel 10 m.Für Pumpen: EHP 2, EHP 3, EHP 4, HK 12/2 EL . Verkaufseinheit: 1 ST. Lieske Part No.: 492132 Mfg Part No: FTA1 |
526,24 EUR
≈ £449.41 | ≈ $598.86
Delivery time on requestinfo_outline
|
|
|
KLAUKE FTA4KLAUKE FTA4 footswitch f.akkuhydraulische, pump AHP700-L Connection cable 5 m. For pump AHP 700-L. Lieske Part No.: 993421 Mfg Part No: FTA4 |
699,84 EUR
≈ £597.66 | ≈ $796.42
Delivery time on requestinfo_outline
|
 |
Klauke GR1698Klauke GR1698 ferrules, 0.5 mm white tin plated For fine and extra fine stranded conductors, e.g. according to DIN EN 60228 class 5 and 6, easy-entry insulation for splice-free cable entry, halogen-free, total length 14.0 mm, temperature ... Lieske Part No.: 271819 Mfg Part No: GR1698 |
11,63 EUR
≈ £9.93 | ≈ $13.23
Delivery time on requestinfo_outline
|