Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 16 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 2 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 31 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 450 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 14 )
- Technology ➤ Tools ➤ Punches ( 119 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 24 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 3 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 Klauke ISQ2225 ISQ2225Klauke ISQ2225 crimping die K22er 25 mm² for insulated crimp/terminal cable lug pin crimpingCrimping insert ISQ 22, 25 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 466797 Mfg Part No: ISQ2225 |
219,16 EUR 221,35 EUR
 ≈ £183.44 | ≈ $245.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke ISQ2235 ISQ2235Klauke ISQ2235 crimping die K22er 35 mm² for insulated crimp/terminal cable lug pin type Crimping insert ISQ 22, 35 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 113714 Mfg Part No: ISQ2235 |
219,16 EUR 221,35 EUR
≈ £183.44 | ≈ $245.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke ISQ2250 ISQ2250Klauke ISQ2250 crimping die K22er 50 mm² for insulated crimp/terminal cable lug pin type Crimping insert ISQ 22, 50 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 183546 Mfg Part No: ISQ2250 |
219,16 EUR 221,35 EUR
≈ £183.44 | ≈ $245.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke ISQ2270 ISQ2270Klauke ISQ2270 crimping die K22er 70 mm² for insulated crimp/terminal cable lug pin type Crimping insert ISQ 22, 70 mm², series 22. Suitable for insulated crimp cable lugs and pin cable lugs. Lieske Part No.: 630248 Mfg Part No: ISQ2270 |
219,16 EUR 221,35 EUR
≈ £183.44 | ≈ $245.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K02 K02Klauke K02 crimping tool 0 75–16 mm² for insulated cable connections Ideal pressing tool with spring-assisted tool opening. For tubular cable lugs and connectors for solid conductors. With locking device for evenly controlled pressing results. Exact cross-section ... Lieske Part No.: 563747 Mfg Part No: K02 |
166,06 EUR 173,05 EUR
≈ £138.99 | ≈ $185.82
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K05 K05Klauke K05 crimping tool 6–50 mm² for insulated cable connection standard version hexagonal Dies without locking device for non-insulated cable links Hexagonal crimping is required with built-in revolving dies, so no replacing d jaws. Design: Cross sections for 6 mm ² 50, length 390 ... Lieske Part No.: 244585 Mfg Part No: K05 |
315,78 EUR 329,08 EUR
≈ £264.31 | ≈ $353.36
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Klauke K05D K05DKlauke K05D crimping tool 6-50 mm² for insulated cable connections for DIN Pressing tool for compression cable lugs and connectors, DIN 46235/DIN 46267 Part 1 6-50 mm². Effort-saving and low-maintenance mechanical drive. With rotating profile discs. Exact cross-section ... Lieske Part No.: 781963 Mfg Part No: K05D |
315,78 EUR 329,08 EUR
≈ £264.31 | ≈ $353.36
On order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K05WF50 K05WF50Klauke K05WF50 crimping tool 25-50 mm² Hand tool for crimping wire end ferrules of 25 - 50 mm² and twin wire end ferrules 2x16 mm². Easy to use thanks to the supporting pre-clamping lever. Double the crimping width - 50% fewer crimps ... Lieske Part No.: 684105 Mfg Part No: K05WF50 |
278,49 EUR 290,22 EUR
≈ £233.10 | ≈ $311.63
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K05WF95 K05WF95Klauke K05WF95 crimping tool 50-95 mm² Hand tool for crimping wire end ferrules from 50 - 95 mm². Easy to use thanks to the supporting pre-clamping lever. Double the crimping width - 50% fewer crimps required. Square crimp: optimal fit ... Lieske Part No.: 684107 Mfg Part No: K05WF95 |
278,49 EUR 290,22 EUR
≈ £233.10 | ≈ $311.63
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K06 K06Klauke K06 crimping tool 6-120 mm² for insulated cable connections Dies without locking device for non-insulated cable links Hexagonal crimping is required with built-in revolving dies, so no replacing d jaws. Design: Cross sections for 10 120 sq mm, length ... Lieske Part No.: 188562 Mfg Part No: K06 |
381,24 EUR 397,29 EUR
≈ £319.10 | ≈ $426.61
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K06D K06DKlauke K06D crimping tool 6-120 mm² for insulated cable connections Energy-saving and maintenance-free mechanical drive. With rotating profile discs. Exact cross-section assignment through permanent marking on the profile discs. For DIN compression cable lugs and ... Lieske Part No.: 352555 Mfg Part No: K06D |
381,24 EUR 397,29 EUR
≈ £319.10 | ≈ $426.61
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K09 K09Klauke K09 crimping tool 25–150 mm² for insulated cable connections Dies without locking device for non-insulated cable connections hexagonal compression with built revolving dies, so no replacement required d cheek plates. Design: Cross sections for 25 5 sq mm, ... Lieske Part No.: 500714 Mfg Part No: K09 |
419,52 EUR 437,18 EUR
≈ £351.14 | ≈ $469.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K09D K09DKlauke K09D crimping tool 25-150 mm² for insulated cable connections Pressing tool for compression cable lugs and connectors DIN 46235/DIN 46267 Part 1, 25-150mm². Effort-saving and low-maintenance mechanical drive. With rotating profile discs. Exact cross-section ... Lieske Part No.: 816283 Mfg Part No: K09D |
419,52 EUR 437,18 EUR
≈ £351.14 | ≈ $469.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K100 K100Klauke K100 cable cutter mechanical for Al and Cu cables up to D14 mm Type: K100 Lieske Part No.: 755113 Mfg Part No: K100 |
97,18 EUR 101,28 EUR
≈ £81.34 | ≈ $108.74
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Klauke K1011 K1011Klauke K1011 cable cutter mechanical max. D 26 mm Al and Cu cables Type: K1011 Lieske Part No.: 210570 Mfg Part No: K1011 |
161,21 EUR 168,00 EUR
≈ £134.93 | ≈ $180.39
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1011E K1011EKlauke K1011E replacement cutting head for hand cutting tool for Al/Cu cables Replacement cutting head K / E match the cable cutters: K / , K 2 / , K 5 / Type: K E item: ST. Lieske Part No.: 756200 Mfg Part No: K1011E |
97,18 EUR 101,28 EUR
≈ £81.34 | ≈ $108.74
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1012 K1012Klauke K1012 cable cutter mechanical max. D 38 mm Al and Cu cables Hand cable cutter K / 2 cutting range up to 38 mm for AL-Cu Cable Type: K 2 Quantity: ST. Lieske Part No.: 829943 Mfg Part No: K1012 |
219,07 EUR 228,29 EUR
≈ £183.36 | ≈ $245.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1012E K1012EKlauke K1012E replacement cutting head for hand cutting tool for Al/Cu cable Replacement cutting head K101/2E match the cable cutter: K 101/2 Type: K1012E Quantity: 1 unit. Lieske Part No.: 449232 Mfg Part No: K1012E |
150,57 EUR 156,92 EUR
≈ £126.03 | ≈ $168.49
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K102 K102Klauke K102 cable cutter mechanical for Al and Cu cables up to D20 mm Hand Cable Cutter K 2 for fine stranded conductors cutting range: max. Ø 2 mm Length: 2 mm Weight: 35 g Type: K 2 Quantity: ST. Lieske Part No.: 927751 Mfg Part No: K102 |
84,36 EUR 87,91 EUR
≈ £70.61 | ≈ $94.40
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1031 K1031Klauke K1031 hand cutting tool up to 60 mm for Al/Cu cable L 720 mm 4.5 kg Mechanical hand cable cutter K 103/1 with ratchet gradual cutting of cable, two-hand operation, suitable for cutting of earth, plastic and rubber cable from CU and AL, but not for cutting steel or ... Lieske Part No.: 241805 Mfg Part No: K1031 |
873,72 EUR 910,50 EUR
≈ £731.30 | ≈ $977.69
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1041 K1041Klauke K1041 hand cutting tool up to 100 mm for Al/Cu cable L 870 mm 5.7 kg Mechanical hand cable cutter K 4 / Ratchet type two-hand operation, suitable for cutting of earth, plastic and rubber cable from CU and AL, but not for cutting steel or steel wire. Cutting range: ... Lieske Part No.: 747182 Mfg Part No: K1041 |
999,40 EUR 1.041,48 EUR
≈ £836.50 | ≈ $1,118.33
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1051 K1051Klauke K1051 cable cutter mechanical max. D 26 mm Al and Cu cable Hand Cable Cutter K 5 / with interchangeable cutting heads, and fully adjustable telescopic handles Cutting range: max. 26 mm Ø Weight: about 4 g Type: K 5 ST. Lieske Part No.: 992828 Mfg Part No: K1051 |
194,84 EUR 203,05 EUR
≈ £163.08 | ≈ $218.03
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Klauke K1061 K1061Klauke K1061 cable shear ratchet type max. D 32 mm Hand cable cutter K 6 / Cutting range up to 32 mm for AL-Cu cable with ratchet type: K 6 ST. Lieske Part No.: 867136 Mfg Part No: K1061 |
411,16 EUR 428,47 EUR
≈ £344.14 | ≈ $460.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K1062 K1062Klauke K1062 cable shear ratchet version max. D 52 mm Hand cable cutter K 106/2 cutting range up to 52 mm for AL-Cu cable with ratchet type: K1062 Quantity: 1 unit. Lieske Part No.: 241709 Mfg Part No: K1062 |
536,27 EUR 558,86 EUR
≈ £448.86 | ≈ $600.09
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|