Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 16 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 2 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 31 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 450 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 14 )
- Technology ➤ Tools ➤ Punches ( 119 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 24 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 3 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 Klauke K118 K118Klauke K118 hand cable cutter for solid conductorsHandliche Bauform mit hoher Schneidleistung. Hervorragendes Schneidwerkzeug für Massiv-, mehr-, fein- und feinstdrähtige Kabel z.B. nach VDE 0295. Klasse 1,2.,5 und 6. Optimale Schneidleistung durch ... Lieske Part No.: 159609 Mfg Part No: K118 |
30,97 EUR 32,27 EUR
 ≈ £25.92 | ≈ $34.66
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K130 K130Klauke K130 cable cutter mechanical max. D 30 mm Al and Cu cables Type: K130 Lieske Part No.: 169859 Mfg Part No: K130 |
161,21 EUR 168,00 EUR
≈ £134.93 | ≈ $180.39
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K150 K150Klauke K150 cable cutter mechanical max. D 50 mm Al and Cu cable Type: K150 Lieske Part No.: 402823 Mfg Part No: K150 |
290,51 EUR 302,74 EUR
≈ £243.16 | ≈ $325.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K16 K16Klauke K16 crimping tool 10–16 mm² for insulated cable connections oval crimping Pressing tool also for meter wiring. With locking device for evenly controlled pressing results. Color-coded cross-section assignment. Lieske Part No.: 342451 Mfg Part No: K16 |
200,07 EUR 208,49 EUR
≈ £167.46 | ≈ $223.88
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Klauke K2 K2Klauke K2 crimping tool 0 75-16 qm for insulated cable connections, notching crimping K 2 scoring tool for non-insulated cable links Compound leverage, with locking device, pressing region: 75 6 mm ², length: 325 mm Type: K2 item: ST. Lieske Part No.: 950199 Mfg Part No: K2 |
166,06 EUR 173,05 EUR
≈ £138.99 | ≈ $185.82
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K22 K22Klauke K22 crimping tool 4-300 mm² for insert Crimping tool K 22 for interchangeable dies rotatable crimping head, 360 °, with telescopic handles Length: 560 860 mm continuously, weight: 2.500 kg Type: K22 Quantity: 1 unit. Lieske Part No.: 352559 Mfg Part No: K22 |
895,38 EUR 933,08 EUR
≈ £749.43 | ≈ $1,001.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K25 K25Klauke K25 crimping tool 0.5–16 mm² for insulated cable connections, notched crimping Ideal pressing tool with spring-supported tool opening. For crimp cable lugs DIN 46234, pin cable lugs DIN 46230. For nickel and stainless steel tubular cable lugs and connectors up to 6 mm². With ... Lieske Part No.: 952234 Mfg Part No: K25 |
166,06 EUR 173,05 EUR
≈ £138.99 | ≈ $185.82
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K29 K29Klauke K29 crimping tool for wire end ferrules 50-95 mm² trapezoidal crimping Crimping tool K 29 for ferrules according to DIN 46228, trapezoid crimping with ratchet, Crimping range: 50 95 mm ² Length: about 335 mm Weight: 0.800 kg Type: K29 Quantity: 1 unit. Lieske Part No.: 313434 Mfg Part No: K29 |
206,44 EUR 206,44 EUR
≈ £172.79 | ≈ $231.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K3 K3Klauke K3 crimping tool for wire end ferrules 0.5–16 mm², pin crimping K 3 die for ferrules in accordance with DIN 46228, Indent crimping, pressing region: 5 6 mm ² Type: K3 item: ST. Lieske Part No.: 936636 Mfg Part No: K3 |
49,97 EUR 52,07 EUR
≈ £41.82 | ≈ $55.92
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K3014K K3014KKlauke K3014K crimping tool 0.14–10 mm² for wire end ferrules and twin wire end ferrules Square pressing Very light and ergonomic Properties One pressing profile for all cross-sections through automatic cross-section adjustment With locking device for evenly controlled pressing results ... Lieske Part No.: 617507 Mfg Part No: K3014K |
218,59 EUR 227,80 EUR
≈ £182.96 | ≈ $244.60
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Klauke K3016K K3016KKlauke K3016K press tool for wire end ferrules hexagonal Crimping tool for wire end ferrules and twin wire end ferrules 0.14 - 10 mm², hexagonal crimping, very light and ergonomic, one crimping profile for all cross-sections thanks to automatic ... Lieske Part No.: 1597161 Mfg Part No: K3016K |
218,59 EUR 227,80 EUR
≈ £182.96 | ≈ $244.60
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K303 K303Klauke K303 crimping tool for wire end ferrules 0.14–10 mm² square crimping Crimping tool K 3/3 square crimping with ratchet Crimping range: 4 - mm ², length: ca 9 mm, weight: ca, 3 kg. Twin ferrules Crimping range: 2 x 5 - 2 x 4 mm ² Type: K3 3 item: ST. Lieske Part No.: 769987 Mfg Part No: K303 |
228,28 EUR 237,90 EUR
≈ £191.07 | ≈ $255.45
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Klauke K304K K304KKlauke K304K crimping tool 0.08–16 mm² for wire end ferrules and twin wire end ferrules Quantity: 1 ST. Lieske Part No.: 429123 Mfg Part No: K304K |
266,71 EUR 277,94 EUR
≈ £223.24 | ≈ $298.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K306K K306KKlauke K306K crimping tool for wire end ferrules and twin wire end ferrules 0.08–16 mm² Presswerkzeug für Aderendhülsen und Zwillingsaderendhülsen 0,08 - 16 mm², Sechskantpressung, ein Pressprofil für alle Querschnitte von 0,08 - 16 mm² durch automatische Querschnittanpassung, mit ... Lieske Part No.: 847505 Mfg Part No: K306K |
266,71 EUR 277,94 EUR
≈ £223.24 | ≈ $298.45
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Klauke K32 K32Klauke K32 crimping tool for wire end ferrules 0.14–6 mm² trapezoidal crimping Die K 32 for ferrules according to DIN 46228 and twin, trapezoid crimping with ratchet, Crimping range: 0.14 6.0 mm ² and 2 x 0.5 2 x 2.5 mm ² length: 210 mm Weight: 0.350 kg Type: K32 ... Lieske Part No.: 438760 Mfg Part No: K32 |
290,51 EUR 302,74 EUR
≈ £243.16 | ≈ $325.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K35 K35Klauke K35 crimping tool for wire end ferrules 10-35 mm², pin crimping K 35 crimping tool for ferrules in accordance with DIN 46228, Indent crimping, pressing region: , 35 mm ² Type: K35 Quantity: ST. Lieske Part No.: 540609 Mfg Part No: K35 |
47,93 EUR 49,95 EUR
≈ £40.12 | ≈ $53.63
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K354 K354Klauke K354 crimping tool battery hydraulic 6-150 mm² crimping head 345° Type: K354 Lieske Part No.: 802891 Mfg Part No: K354 |
573,80 EUR 597,96 EUR
≈ £480.27 | ≈ $642.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K36 K36Klauke K36 crimping tool for wire end ferrules 0.5–6 mm² trapezoidal crimping Crimping tool K 36 Trapezoid crimping 2 Preßprofile. Preßbreich: 1 profile ferrules 0.5 to 2.5 mm ² Twin wire 2 x 2.5 up to 2 x 4 mm ² profile 2 ferrules 4 to 6 mm ² Twin wire 2 x 4-2 x 6 mm ² ... Lieske Part No.: 376720 Mfg Part No: K36 |
120,93 EUR 126,03 EUR
≈ £101.22 | ≈ $135.32
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K4 K4Klauke K4 crimping tool for wire end ferrules 0.5–2.5 mm², pin crimping Die K 4 for ferrules according to DIN 46228, Indent crimping, pressing area: 0.5 2.5 mm ² Type: K4 Quantity: 1 unit. Lieske Part No.: 176120 Mfg Part No: K4 |
33,63 EUR 35,05 EUR
≈ £28.15 | ≈ $37.63
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Klauke K432 K432Klauke K432 wire stripping tool with wire cutter, stripping length max. 17 mm Stripping tool K 43/2 Automatic stripping pliers with wire cutter adjustable stop, stripping length up to max. 7 mm, trouble replacing the stripping blade cassettes: 8 mm ² Weight: about, 4 kg. Lieske Part No.: 101203 Mfg Part No: K432 |
141,55 EUR 147,51 EUR
≈ £118.48 | ≈ $158.39
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K432E K432EKlauke K432E knife cassette 0.02–10 mm² black for wire stripper K432 For stripping tool K432 and K43290 Lieske Part No.: 1438839 Mfg Part No: K432E |
72,11 EUR 72,82 EUR
≈ £60.36 | ≈ $80.69
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K432E2 K432E2Klauke K432E2 knife cassette blue for wire stripper K432 0.1–4 mm² For stripping tools K432 and K43290 for PTFE-insulated cables. Lieske Part No.: 320412 Mfg Part No: K432E2 |
87,88 EUR 88,76 EUR
≈ £73.56 | ≈ $98.34
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K432E3 K432E3Klauke K432E3 knife cassette red for wire stripper K432 4–16 mm² For stripping tools K432 and K43290. Lieske Part No.: 715662 Mfg Part No: K432E3 |
112,86 EUR 113,99 EUR
≈ £94.46 | ≈ $126.29
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Klauke K432UKlauke K432U Wire stripper blade in U-shape Lieske Part No.: 267956 Mfg Part No: K432U |
134,87 EUR
≈ £112.89 | ≈ $150.92
Made to order · Delivery time approx. 20 workdaysinfo_outline
|