Lightning protection material in Grounding Systems

500+

Articles

✓

Standards-compliant

⚡

B2B trade

B2B

In stock

Blitzschutzmaterial

Blitzschutzmaterial – specialised products from the Erdungssysteme range. Industry-Electronics offers a comprehensive assortment for professional use in industry, commerce and trade.

All products are from reputable manufacturers and comply with applicable DIN/VDE standards. Benefit from competitive B2B pricing, fast delivery and expert technical advice.

Technical advice: +49 (0)7666 / 88499-0 | sales@industry-electronics.com

Leading brands

✓	Dehn
✓	OBO Bettermann
✓	Phoenix Contact
✓	Citel
✓	Novaris

Top sellers in Lightning protection material

DEHN 920300 BXTBAS base unit
4-pole BLITZDUCTOR XT/XTU
54,05 EUR

DEHN 308035 VK6.22FL40KB6.
10BSBSTBL connection
terminal for Rd
7,69 EUR

DEHN 365250 UNIFK8.10KBF0.
78ALV2A UNI-fold clamp for
round wire 8–10 mm
8,55 EUR

DEHN 785645 NHSAG003NS NH
fuse carrier 00-3 for
mounting -1000 V
249,66 EUR

DEHN 204159

5,70 EUR

DEHN 563169 AKRPAV2A
connection clamp for
ring-PA NIRO
8,74 EUR

DEHN 318033 KSFL30STTZN cross
piece for Fl30/30
9,03 EUR

DEHN 301009 KSV6.10V2A KS
connector NIRO for Rd
7–10 mm 1-piece
12,54 EUR

DEHN 318233 KSFL30V4A cross
piece NIRO for Fl30/30
without intermediate
20,52 EUR

DEHN 318209 KS8.10FL30V4A
cross piece for Rd 8-10/Fl
30 Fl 30/30
20,52 EUR

DEHN 420207 ZMRRS100KB6.
10CUSTTZN rainwater pipe
clamp D100 mm Cu-St/tZn
23,65 EUR

DEHN 929044 DGAGN surge
arrester gate with N
connection
224,77 EUR

Lightning protection material from ABB

ABB 2CTB815710R2300 OVR T1-T2 4L 12.5-275s P QS SPD Kombi T1+2 12.5 kA/p Combined lightning and surge protection device SPD type 1+2, for protecting low-voltage consumer systems against lightning currents and surges. Tested SPD type 1 and type 2 according to DIN EN ...

Lieske Part No.: 1441357
Mfg Part No: 2CTB815710R2300
Type: OVR T1-T2 4L 12.5-275s P QS

630,42 EUR 656,96 EUR

≈ £527.66 | ≈ $702.92

Made to order · Delivery time approx. 20 workdays

ABB 2CTB815710R4000 OVR T1-T2 4L 12.5-440s P TS QS SPD Kombi T1+2 12.5kA/Pol Combined lightning and surge protection device SPD type 1+2, for protecting low-voltage consumer systems against lightning currents and surges. Tested SPD type 1 and type 2 according to DIN EN ...

Lieske Part No.: 556287
Mfg Part No: 2CTB815710R4000
Type: OVR T1-T2 4L 12.5-440s P TS QS

966,58 EUR 1.007,28 EUR

≈ £809.03 | ≈ $1,077.74

Made to order · Delivery time approx. 20 workdays

Lightning protection material from ABN

ABN R9L22312 combination conductor ZP T1 T2 T3 12.5kA TNC 3P voltage tap with safety switch disconnector ZP combined arrester for NAR on 40mm SaS in snap-on technology type T1+T2+T3, with external lightning protection 12.5 kA, TNC system 3P, leakage current free, voltage tap with integrated fuse and ...

Lieske Part No.: 2023201
Mfg Part No: R9L22312

579,98 EUR 604,40 EUR

≈ £485.44 | ≈ $646.68

Made to order · Delivery time approx. 20 workdays

ABN R9L22712 combination conductor ZP T1 T2 T3 12.5kA TT/TNS 3PN voltage tap with safety switch disconnector ZP combination arrester for NAR on 40mm SaS in snap-on technology type T1+T2+T3, with external lightning protection 12.5 kA, TT/TNS system 3PN, leakage current free, voltage tap with integrated fuse ...

Lieske Part No.: 2023202
Mfg Part No: R9L22712

677,35 EUR 705,87 EUR

≈ £566.94 | ≈ $755.25

Made to order · Delivery time approx. 20 workdays

Lightning protection material from Cimco

Cimco 142066 Kati Blitz Mini replacement band 15 m Katimex®-Kati® Blitz Mini accessories. Replacement tape, spooled in cassette, 2 starter sleeves with external thread M 2.5 and 1 Flexi-Sonde Mini. Tape length: 15 m

Lieske Part No.: 1104625
Mfg Part No: 142066

46,32 EUR

≈ £38.77 | ≈ $51.65

Made to order · Delivery time approx. 20 workdays

Cimco 142068 Kati Blitz Mini replacement band 25 m Katimex®-Kati® Blitz Mini accessories. Replacement tape, spooled in cassette, 2 starter sleeves with external thread M 2.5 and 1 Flexi-Sonde Mini. Tape length: 25 m

Lieske Part No.: 1104624
Mfg Part No: 142068

50,39 EUR 51,51 EUR

≈ £42.18 | ≈ $56.18

Made to order · Delivery time approx. 20 workdays

Cimco 142070 Kati Blitz Mini replacement band 35 m Katimex®-Kati® Blitz Mini accessories. Replacement tape, spooled in cassette, 2 starter sleeves with external thread M 2.5 and 1 Flexi-Sonde Mini. Tape length: 35 m

Lieske Part No.: 1104623
Mfg Part No: 142070

55,49 EUR 56,74 EUR

≈ £46.45 | ≈ $61.87

Made to order · Delivery time approx. 20 workdays

Cimco 142072 Service Set Kati Blitz Mini Katimex®-Kati® Blitz Mini accessories - 13 pieces. Service set consisting of 10 mini starter sleeves, 1 special adhesive 3g, 1 sanding pad 50x50 mm, 1 insulating tape 15 mm.

Lieske Part No.: 1104621
Mfg Part No: 142072

37,87 EUR 38,72 EUR

≈ £31.70 | ≈ $42.23

Made to order · Delivery time approx. 20 workdays

Cimco 142074 Flexi-Sonde Kati Blitz Mini Katimex®-Kati® Blitz Mini accessories. Flexi-probe mini set of 5 - with internal thread M25.

Lieske Part No.: 1104622
Mfg Part No: 142074

34,49 EUR 35,26 EUR

≈ £28.87 | ≈ $38.46

Made to order · Delivery time approx. 20 workdays

Lightning protection material from DEHN

DEHN 101000 FS 10 1000 AL lightning rod D10 mm L1000 mm both ends chamfered Catch rod bevelled on both sides, for protecting roof structures, chimneys, etc., also for erecting with a concrete base (8.5 kg) using wedge technology, or for fastening with rod holders / spacers.

Lieske Part No.: 922662
Mfg Part No: 101000
Type: FS 10 1000 AL

203,30 EUR

≈ £170.16 | ≈ $226.68

Made to order · Delivery time approx. 20 workdays

DEHN 101001 FS101000M10V2A lightning rod D10 mm 1 m Al with lock nut for HVI cable Air termination tip with lock nut, for screwing into the head of the support tube and for connecting the HVI® conductor, or for screwing into the air termination rod GFK/Al with M10 thread.

Lieske Part No.: 471497
Mfg Part No: 101001
Type: FS 10 1000 M10 V2A

31,35 EUR

≈ £26.24 | ≈ $34.96

Made to order · Delivery time approx. 20 workdays

DEHN 101007 FS 10 1000 CU lightning rod D10 mm L1000 mm Cu both ends flared 1010ron Catch rod bevelled on both sides, for protecting roof structures, chimneys, etc., also for erecting with a concrete base (8.5 kg) using wedge technology, or for fastening with rod holders / spacers.

Lieske Part No.: 127941
Mfg Part No: 101007
Type: FS 10 1000 CU

1.347,10 EUR

≈ £1,127.52 | ≈ $1,502.02

Made to order · Delivery time approx. 20 workdays

DEHN 101009 FS 10 1000 V2A lightning rod D10 mm L1000 mm stainless steel both ends chamfered Catch rod bevelled on both sides, for protecting roof structures, chimneys, etc., also for erecting with a concrete base (8.5 kg) using wedge technology, or for fastening with rod holders / spacers.

Lieske Part No.: 318774
Mfg Part No: 101009
Type: FS 10 1000 V2A

608,00 EUR

≈ £508.90 | ≈ $677.92

Made to order · Delivery time approx. 20 workdays

DEHN 101010 FSP 10 1000 W55 AL capture tip D10 mm L1000 mm Al 55° angled both sides chamfered Separate air termination tip (for combining with connection terminals for steel beams, for example), for protecting open-space PV systems or carports with PV systems from direct lightning strikes, for ...

Lieske Part No.: 156337
Mfg Part No: 101010
Type: FSP 10 1000 W55 AL

133,00 EUR

≈ £111.32 | ≈ $148.30

Made to order · Delivery time approx. 20 workdays

DEHN 101110 FSPS 10 1000 W55 FK AL lightning rod D:10 mm L:1000 mm with 2 fold clamps Catch tip including two seam clamps (clamping range 0.7-8 mm), for protecting e.g. open-space PV systems or carports with PV systems from direct lightning strikes. The catch tip is attached with ...

Lieske Part No.: 852510
Mfg Part No: 101110
Type: FSPS 10 1000 W55 FK AL

24,89 EUR

≈ £20.83 | ≈ $27.75

Made to order · Delivery time approx. 20 workdays

DEHN 102002 BES 17KG M16 D337 concrete plinth C45/55 D:337 mm with grip recesses and adapters Concrete base with thread adapter for air catch rods Rd 16 mm with M16 thread, for the protection of smaller roof structures on flat roofs.

Lieske Part No.: 362006
Mfg Part No: 102002
Type: BES 17KG M16 D337

30,78 EUR

≈ £25.76 | ≈ $34.32

Delivery time from supplier's stock (ca.) 5 workdays

DEHN 102003 BES8.5KG M16 D240 concrete plinth C45/55 D240 mm SET with handle and adapter M16 Concrete base with thread adapter for air-termination rods Rd 16 mm with M16 thread, for the protection of smaller roof structures on flat roofs and additional fastening, e.g. with DEHNiso spacers.

Lieske Part No.: 268931
Mfg Part No: 102003
Type: BES 8.5KG M16 D240

22,13 EUR

≈ £18.52 | ≈ $24.67

Made to order · Delivery time approx. 20 workdays

DEHN 102010 BES17KGKT16D337SET concrete plinth C45/55 with handle and wedge D337 mm H90 mm Concrete base for air-termination rods, for protecting smaller roof structures on flat roofs and for setting up spacers, e.g. for separate ring lines or free-standing air-termination rods in a tripod ...

Lieske Part No.: 726854
Mfg Part No: 102010
Type: BES 17KG KT16 D337 SET

28,69 EUR

≈ £24.01 | ≈ $31.99

Made to order · Delivery time approx. 20 workdays

DEHN 102012 102011 BES17KGKT16D337 concrete plinth B55 17 kg D 337 mm with grip recess Concrete base but without wedge, for erecting tripods and four-legged stands with base holder rods M16 (e.g. item no. 107 390 + 107 396 ...).

Lieske Part No.: 1336743
Mfg Part No: 102012
Type: BES 17KG KT16 D337

25,46 EUR

≈ £21.31 | ≈ $28.39

Made to order · Delivery time approx. 20 workdays

DEHN 102050 ULP KS D370 SW plastic washer plate D 370 mm black Base plate to protect the roofing sheets under the concrete base, large version for the weight 17 kg.

Lieske Part No.: 171161
Mfg Part No: 102050
Type: ULP KS D370 SW

10,16 EUR

≈ £8.50 | ≈ $11.33

Made to order · Delivery time approx. 20 workdays

DEHN 102060 ULP KS D280 SW plastic washer plate D 280 mm black Base plate to protect the roofing sheets under the concrete base, small version for the weight 8.5 kg.

Lieske Part No.: 644460
Mfg Part No: 102060
Type: ULP KS D280 SW

7,79 EUR

≈ £6.52 | ≈ $8.69

Made to order · Delivery time approx. 20 workdays

DEHN 102075 BES8.5KGKT1016D240SET concrete plinth C45/55 with wedge D240 mm Concrete base for air-termination tips Rd 10 mm (length 1000 mm), for protecting smaller roof structures on flat roofs and for erecting spacers, e.g. for separate ring lines with DEHNiso spacers Rd 16 ...

Lieske Part No.: 455880
Mfg Part No: 102075
Type: BES 8.5KG KT10 16 D240 SET

20,05 EUR

≈ £16.78 | ≈ $22.36

Made to order · Delivery time approx. 20 workdays

DEHN 102340 BES17KGKT16ULPD337SET concrete plinth C45/55 17 kg D337 Concrete base for air-termination rods, for protecting smaller roof structures on flat roofs and for setting up spacers, e.g. for separate ring lines or free-standing air-termination rods in a tripod ...

Lieske Part No.: 221085
Mfg Part No: 102340
Type: BES 17KG KT16 ULP D337 SET

35,72 EUR

≈ £29.90 | ≈ $39.83

Made to order · Delivery time approx. 20 workdays

DEHN 103013 TBM 13.35M FP400 STTZN Tele lightning protection mast ÜFL with gland plate Telescopic lightning protection mast for quiver or concrete foundations, tested according to DIN EN 62561-(1+2). For protection against direct lightning strikes in special systems such as biogas ...

Lieske Part No.: 1893330
Mfg Part No: 103013
Type: TBM 13.35M FP400 STTZN

7.932,88 EUR

≈ £6,639.82 | ≈ $8,845.16

Made to order · Delivery time approx. 20 workdays

1 2 3 4 5 6 8 10 12 17 22 27 32 37 42 47 52 54

Blitzschutzmaterial – Professional range for the specialist contractor

Industry-Electronics is your reliable B2B partner for Blitzschutzmaterial. With over 20 years of experience in specialist trade, we offer standards-compliant products from reputable manufacturers at competitive prices.

Whether single items for repair or larger quantities for projects – our technical team supports you in product selection and is happy to provide individual quotes. Contact us at +49 (0)7666 / 88499-0.

Typical Application Areas

⚡ Lightning protection	🏭 Industrial plants	🏠 Residential	🔧 Photovoltaic	✓ Surge protection

⚙ Air termination	🔌 Down conductors	📊 Earth electrodes	📋 Isolating spark gaps	🔍 Telecommunications

Why Industry-Electronics?

⚡ Standards-compliant products All items comply with applicable DIN, VDE and EN standards for professional electrical installation.	✓ Fair B2B pricing Competitive prices and special conditions for trade and contractors on request.	🔧 Expert advice Personal consultation by installation technology experts at +49 (0)7666 / 88499-0.

🚀 Fast delivery Many items in stock with prompt dispatch throughout Germany and Europe.	🏭 Pure B2B trade No private customer business – we understand the requirements of professional electrical contractors.	⚙ Wide assortment Over 500,000 articles in our total range – everything from one source for the electrical installer.