Lightning protection material in Grounding Systems
Lightning protection material from Dehn + Soehne
|
Dehn + Soehne 200089 Dehn line holder NIRO (V2A) model PPS, 100-120 mm
Cable holder for laying drains on rainwater downpipes. Type PPS with worm thread and bead, fixed cable routing.Lieske Part No.: 330906 Mfg Part No: 200089 |
5,84 EUR
![]() ≈ £4.98 | ≈ $6.67
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 200600 DEHN foam panels-Plug L ,
Hard foam board dowel for fastening cable, flat strip and rod holders in thermal insulation composite systems. Drive with internal hexagon (TX40) and assembly with wood screws D4.5 mm. Short version.Lieske Part No.: 488667 Mfg Part No: 200600 |
3,37 EUR
![]() ≈ £2.87 | ≈ $3.85
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 200601 DEHN foam panels-Plug L ,
Hard foam board dowel for attaching cable, flat strip and rod holders in thermal insulation composite systems. Drive with internal hexagon (TX40) and assembly with wood screws D4.5 mm. Long version.Lieske Part No.: 779239 Mfg Part No: 200601 |
3,96 EUR
![]() ≈ £3.37 | ≈ $4.52
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202000 Dehn UELDQ6.10B8.5STTZN single screw overlayer DEHNQUICK Rd6-10
DEHNQUICK cable holder for laying round cables, e.g. flush-mounted or on the wall (behind the thermal insulation composite system). Version with 8.5 mm bore.Lieske Part No.: 621504 Mfg Part No: 202000 |
1,19 EUR
![]() ≈ £1.01 | ≈ $1.36
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202001 Dehn line holder DEHNQUICK , NIRO for wire 6-10 mm
DEHNQUICK cable holder for laying round cables, e.g. flush-mounted or on the wall (behind the thermal insulation composite system). Version with 8.5 mm bore.Lieske Part No.: 291763 Mfg Part No: 202001 |
1,49 EUR
![]() ≈ £1.27 | ≈ $1.70
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202005 Dehn DLH DQ 6.10 WPRO5 STTZN roof conductor holder corrugated plates.Prof.5Rd 6-10mm
Roof conductor holder for installing air-termination systems on corrugated sheet roofs. Curved version for corrugated sheet roofs profile 5 with DEHNQUICK conductor holder, fixed conductor routing.Lieske Part No.: 376139 Mfg Part No: 202005 |
4,55 EUR
![]() ≈ £3.88 | ≈ $5.20
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202010 DEHN Roof Conductor Holder DEHNQUICK, Rd 6-10mm m. Strut L 260mm cranked
Roof conductor holder with strut for fastening air-termination and down conductors for roof surfaces. Cranked version, with DEHNQICK conductor holder and fixed cable guide.Lieske Part No.: 309849 Mfg Part No: 202010 |
6,04 EUR
![]() ≈ £5.15 | ≈ $6.90
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202015 Dehn DLH DQ 6.10 WPRO5 8 STTZN roof line pipe corrugated roofs Prof.5/8 Rd6-10mm
Roof conductor holder for installing air-termination systems on corrugated sheet roofs. Angled version for corrugated sheet roofs profile 5 and profile 8 with DEHNQUICK conductor holder, fixed ...Lieske Part No.: 1427612 Mfg Part No: 202015 Type: DLH DQ 6.10 WPRO5 8 STTZN |
3,47 EUR
![]() ≈ £2.96 | ≈ $3.96
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202017 Dehn roof conductor holder Cu , DEHNQUICK round wire cranked 6-10 mm
Roof conductor holder with strut for fastening air-termination and down conductors for roof surfaces. Cranked version, with DEHNQICK conductor holder and fixed cable guide.Lieske Part No.: 228983 Mfg Part No: 202017 |
15,94 EUR
![]() ≈ £13.58 | ≈ $18.20
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202020 Dehn DLHDQ6.10FG120.240STTZN roof conductor holder DEHNQUICK for Rd 6-10mm
Roof conductor holder, stepwise adjustable with DEHNquick conductor holder, for fastening air-termination conductors to the ridge tile, e.g. on tiled roofs. With fixed cable routing in the middle at ...Lieske Part No.: 454814 Mfg Part No: 202020 |
11,78 EUR
![]() ≈ £10.04 | ≈ $13.45
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202021 DEHN roof conductor holder DEHNQUICK St / tZn, Rd 6-10 mm adjustable 200-280mm
Roof conductor holder, stepwise adjustable with DEHNquick conductor holder, for fastening air-termination conductors to the ridge tile, e.g. on tiled roofs. With fixed cable routing in the middle at ...Lieske Part No.: 257124 Mfg Part No: 202021 |
12,18 EUR
![]() ≈ £10.38 | ≈ $13.91
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202027 Dehn roof conductor holder Cu , DEHNQUICK round wire 6-10 mm
Roof conductor holder, stepwise adjustable with DEHNquick conductor holder, for fastening air-termination conductors to the ridge tile, e.g. on tiled roofs. With fixed cable routing in the middle at ...Lieske Part No.: 262188 Mfg Part No: 202027 |
28,61 EUR
![]() ≈ £24.38 | ≈ $32.67
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202030 Our concern Roof Conductor Holder St / tZn ,
Roof conductor holder for installing air-termination systems on flat roofs and walls. Small St/tZn version, with DEHNQUICK conductor holder, fixed conductor routing, height to conductor center 60 mm.Lieske Part No.: 560166 Mfg Part No: 202030 |
6,63 EUR
![]() ≈ £5.65 | ≈ $7.57
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202037 Dehn roof conductor holder Cu , DEHNQUICK Rd 6-10 mm straight version
Roof conductor holder with strut for fastening air-termination and down conductors for roof surfaces. Straight version, with DEHNQICK conductor holder and fixed cable routing.Lieske Part No.: 578346 Mfg Part No: 202037 |
15,54 EUR
![]() ≈ £13.24 | ≈ $17.75
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202040 Our concern Roof Conductor Holder St / tZn , execution just
Roof conductor holder with strut for fastening air-termination and down conductors for roof surfaces. Straight version, with DEHNQICK conductor holder and fixed cable routing.Lieske Part No.: 304015 Mfg Part No: 202040 |
6,24 EUR
![]() ≈ £5.32 | ≈ $7.13
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202050 Our concern Roof Conductor Holder St / tZn , routing along u. Across poss.
Roof conductor holder with angled strut for fastening air-termination and down conductors for roof surfaces. Designed for hanging in the roof tiles or roof battens, with DEHNQICK conductor holder and ...Lieske Part No.: 250043 Mfg Part No: 202050 |
7,23 EUR
![]() ≈ £6.16 | ≈ $8.26
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202060 Dehn DLH DQ 6.10 GP100X100 STTZN roof conductor holder DEHNQUICK
Roof conductor holder for installing air-termination systems on flat roofs and walls. Large St/tZn version, with DEHNQUICK conductor holder, fixed conductor routing, height to conductor center 60 mm.Lieske Part No.: 496833 Mfg Part No: 202060 Type: DLH DQ 6.10 GP100X100 STTZN |
7,03 EUR
![]() ≈ £5.99 | ≈ $8.03
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202080 DEHN Dachleitungshalter St/tZn , Leitungsführung längs u. quer mögl.
Roof conductor holder with angled strut for fastening air-termination and down conductors for roof surfaces. Designed for hanging in the roof tiles or roof battens, with DEHNQICK conductor holder and ...Lieske Part No.: 206087 Mfg Part No: 202080 |
9,70 EUR
![]() ≈ £8.26 | ≈ $11.08
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202169 Dehn UELDQ6.10B6.5V2A single screw overlayer DEHNQUICK Rd6-10
DEHNQUICK cable holder for laying round cables, e.g. flush-mounted or on the wall (behind the thermal insulation composite system). Version with 6.5 mm bore.Lieske Part No.: 569479 Mfg Part No: 202169 Type: UEL DQ 6.10 B6.5 V2A |
1,49 EUR
![]() ≈ £1.27 | ≈ $1.70
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202829 Dehn DLH ZS 20 23 H55 L205 V2A roof conductor holder for HVI cable
Roof conductor holder with two-screw cleat made of stainless steel for laying the HVI conductor, HVI light plus conductor, in the roof surfaces of gable roofs. Version with embossed strut, for 20-23 ...Lieske Part No.: 1946143 Mfg Part No: 202829 Type: DLH ZS 20 23 H55 L205 V2A |
15,84 EUR
![]() ≈ £13.50 | ≈ $18.09
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202852 Dehn DLH SF ZS 20 23 V2A roof conductor holder NIRO for metal roofs
Roof conductor holder with two-screw clamp made of stainless steel for laying the HVI conductor on metal roofs with standing seam.Lieske Part No.: 2014093 Mfg Part No: 202852 Type: DLH SF ZS 20 23 V2A |
18,61 EUR
![]() ≈ £15.86 | ≈ $21.25
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202860 Dehn DLH RSF ZS 27 V2A roof conductor holder NIRO for metal roofs
Roof conductor holder with two-screw clamp made of stainless steel for laying the HVI power conductor on metal roofs with round standing seam.Lieske Part No.: 2090417 Mfg Part No: 202860 Type: DLH RSF ZS 27 V2A |
19,21 EUR
![]() ≈ £16.37 | ≈ $21.94
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202900 DEHN roof conductor holder DEHNQUICK NIRO f, 6-10 mm adjustable 120-240mm
Roof conductor holder, stepwise adjustable with DEHNquick conductor holder, for fastening air-termination conductors to the ridge tile, e.g. on tiled roofs. With fixed cable routing in the middle at ...Lieske Part No.: 143059 Mfg Part No: 202900 |
16,73 EUR
![]() ≈ £14.25 | ≈ $19.11
Delivery time on requestinfo_outline
|
|
Dehn + Soehne 202901 DEHN roof conductor holder Niro cranked , execution
Roof conductor holder with strut for fastening air-termination and down conductors for roof surfaces. Cranked version, with DEHNQICK conductor holder and fixed cable guide.Lieske Part No.: 354271 Mfg Part No: 202901 |
8,02 EUR
![]() ≈ £6.83 | ≈ $9.16
Delivery time on requestinfo_outline
|


























