Installation Material

Practical RiteOn label dispenser for manual labeling. Ideal for repair and maintenance work with small volumes. Easy labeling and processing of the labels. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. T82 marking pen for professional and permanent hand labeling. Write on the labels in the dispenser's viewing window and then apply. Refill packs available (REF). The refill packs for the RiteOn dispensers are available in 3 sizes and 6 different colors. Existing dispensers can be refilled quickly and easily.
Lieske Part No.: 1259952

Type: RO203REF-1401-WH 1401 WH,CL 1 PA

Lieske Part No.: 565474

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1346801

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1131364

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 1346794

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 2058380

Schrumpfrate 3:1. Verfügbar in den Farben Schwarz, Blau, Rot, Weiß und Gelb. Sonderfarben auf Anfrage. Kabeldurchmesser 1 mm bis 39 mm. Gute mechanische Festigkeit und gute Beständigkeit gegen organische Lösungsmittel und Chemikalien. Hochflexibel. Lieferung in praktischen, wiederverschließbaren Kartons. TCGT ist ein 3:1 Schrumpfschlauch im Endlosformat, welcher beidseitig bedruckt werden kann. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, in der Automatisationstechnik, Medizintechnik und in der Kabelkonfektion. Er wird auf handlichen Rollen geliefert. Diese passen optimal in die von HellermannTyton angebotenen Drucksysteme. Werden Schlauchzuschnitte benötigt, ist dies problemlos mit dem optionalen Schneide- oder Perforationsmesser möglich.
Sales unit: 110 meters
Lieske Part No.: 687530

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 pieces
Lieske Part No.: 1131351

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 72 meters
Lieske Part No.: 2058381

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058382

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058383

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1131365

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058384

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058385

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346793

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346792

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346791

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346790

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 1131123

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 2058386

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 176 meters
Lieske Part No.: 1346789

TULT - 3: 1 UL listed heat shrinkable markers, Article number: 553-40351
TULT - 3: 1 UL listed heat shrinkable markers
Features:
Shrink ratio 3: 1
Available in the colors black, blue, red, white and yellow
cable diameter 39 mm to 1 mm
Good mechanical strength and good resistance to organic solvents and chemicals
Highly flexible
Meets UL224 VW-1 and CSA requirements
Delivery in practical, reclosable carton
Simple label design with the TagPrint Pro software
application
TULT is a UL listed 3: 1 ratio heat shrinkable, which can be printed on both sides. This shrink tubing is ideal for the identification of cables and wires in the switch cabinet, military equipment applications in the Automation technology, medical technology, the automotive industry and in cable assembly.
Printer: TrakMark DS, TT4000 + and TT430
Ribbons: TTRC +, TTDTHOUT, TTRW, TT822OUT8
accessories for TrakMark DS and TT4000 +: perforation (P4000) and cutter (S4000)
Accessories for the TT430: perforation (P430) and cutter (S430)
software: TagPrint Pro
Sales unit: 176 meters
Lieske Part No.: 705813

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 110 meters
Lieske Part No.: 1131122

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 110 meters
Lieske Part No.: 1131121

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 72 meters
Lieske Part No.: 1344612

TULT - 3: 1 UL listed heat shrinkable markers, Article number: 553-40951
TULT - 3: 1 UL listed heat shrinkable markers
Features:
Shrink ratio 3: 1
Available in the colors black, blue, red, white and yellow
cable diameter 39 mm to 1 mm
Good mechanical strength and good resistance to organic solvents and chemicals
Highly flexible
Meets UL224 VW-1 and CSA requirements
Delivery in practical, reclosable carton
Simple label design with the TagPrint Pro software
application
TULT is a UL listed 3: 1 ratio heat shrinkable, which can be printed on both sides. This shrink tubing is ideal for the identification of cables and wires in the switch cabinet, military equipment applications in the Automation technology, medical technology, the automotive industry and in cable assembly.
Printer: TrakMark DS, TT4000 + and TT430
Ribbons: TTRC +, TTDTHOUT, TTRW, TT822OUT8
accessories for TrakMark DS and TT4000 +: perforation (P4000) and cutter (S4000)
Accessories for the TT430: perforation (P430) and cutter (S430)
software: TagPrint Pro
Sales unit: 72 meters
Lieske Part No.: 705900

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 54 meters
Lieske Part No.: 1131120

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 1344611

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 541968

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 622196

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 10 meters
Lieske Part No.: 1131119

Shrink ratio 2:1. Halogen-free. Low smoke spread, density and toxicity. High oxygen index. 50 mm, 25 mm and 16 mm heat shrink tubing sections. Available in yellow or white. Special lengths and other colors on request. Cable diameter 1.2 mm to 38.1 mm. Supplied in practical, resealable boxes. TLFX DS is a 2:1 heat shrink tubing specially developed for the rail industry, which is supplied in a practical ladder format. This is particularly suitable for marking cables in public buildings (e.g. airports, hospitals) and means of transport (e.g. rail vehicles, ships, aircraft) as well as tunnels. The special material has low smoke spread, density and toxicity. The prefabricated format not only allows printing on both sides, but also easy and quick removal of any marker. Thanks to the special surface treatment, excellent printing results are always achieved with the HellermannTyton systems.
Lieske Part No.: 1331566

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71005
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 873942

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71009
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 873940

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71011
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 873423

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71014
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 613618

Shrink ratio 3:1. 50 mm and 25 mm shrink tubing sections, 16 mm and special lengths on request. Available in white or yellow. Good mechanical strength and resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT DS is a UL-listed 3:1 shrink tubing that is already supplied in a practical conductor format. The prefabricated format not only allows printing on both sides, but also allows any marker to be removed quickly and easily. The shrink tubing is made of a polyolefin compound and therefore has good mechanical strength and resistance to organic solvents and chemicals. It is ideal for marking cables and wires in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. Thanks to the special surface treatment, excellent printing results are always achieved with the coordinated system from HellermannTyton.
Lieske Part No.: 989496

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71020
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 762545

Type: TULT9-3DS-1x50WH item: 1 ST.
Lieske Part No.: 414489

Type: TULT9-3DS-1x50YE item: 1 ST.
Lieske Part No.: 689651

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71026
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 762546

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71027
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Sales unit: 5 pieces
Lieske Part No.: 873422

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71031
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 167592

Shrink ratio 3:1. 50 mm and 25 mm shrink tubing sections, 16 mm and special lengths on request. Available in white or yellow. Good mechanical strength and resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT DS is a UL-listed 3:1 shrink tubing that is already supplied in a practical conductor format. The prefabricated format not only allows printing on both sides, but also allows any marker to be removed quickly and easily. The shrink tubing is made of a polyolefin compound and therefore has good mechanical strength and resistance to organic solvents and chemicals. It is ideal for marking cables and wires in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. Thanks to the special surface treatment, excellent printing results are always achieved with the coordinated system from HellermannTyton.
Lieske Part No.: 547961

TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer, Artikelnummer: 553-71037
Schrumpfschlauchmarkierer im Leiterformat, Thermotransferdruck

Eigenschaften:

Schrumpfrate 3:1
50 mm und 25 mm Schrumpfschlauchabschnitte, 16 mm und Sonderlängen auf Anfrage
Verfügbar in den Farben Weiß oder Gelb
Erfüllt MIL-STD 202G-Methode 215K-Druckanforderungen
Erfüllt UL224 VW-1 und LUL C3349-Anforderungen
Gute mechanische Festigkeit und Beständigkeit gegenüber organischen Lösemitteln und Chemikalien
Hochflexibel
Lieferung in praktischen, wiederverschließbaren Kartons
Einfache Etikettengestaltung mit der TagPrint Pro Software



Anwendung
TULT DS ist ein ist ein UL-gelisteter 3:1 Schrumpfschlauch, welcher bereits in einem praktischen „Leiterformat“ geliefert wird. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, militärische Geräteanwendungen, in der Automatisationstechnik, Medizintechnik, Automobilindustrie und in der Kabelkonfektion. Dieser Schrumpfschlauch eignet sich für die beidseitige Bedruckung. Der Anwender kann nach der Bedruckung flexibel und einfach den benötigten Markierer entnehmen.
Drucker: TrakMark DS, TT4000+ und TT430
Farbband: TTDTHOUT
Zubehör für den TrakMark DS und den TT4000+: Schneidemesser (S4000)
Zubehör für den TT430: Schneidemesser (S430)
Software: TagPrint Pro
TULT DS - 3:1 UL-gelisteter Schrumpfschlauchmarkierer ist für folgende Industrie-Branchen geeignet

Luft- und Raumfahrt
Elektroinstallation
Elektronikindustrie
Telekommunikation
Lieske Part No.: 167593

Shrink ratio 3:1. 50 mm and 25 mm shrink tubing sections, 16 mm and special lengths on request. Available in white or yellow. Good mechanical strength and resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT DS is a UL-listed 3:1 shrink tubing that is already supplied in a practical conductor format. The prefabricated format not only allows printing on both sides, but also allows any marker to be removed quickly and easily. The shrink tubing is made of a polyolefin compound and therefore has good mechanical strength and resistance to organic solvents and chemicals. It is ideal for marking cables and wires in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. Thanks to the special surface treatment, excellent printing results are always achieved with the coordinated system from HellermannTyton.
Sales unit: 5 pieces
Lieske Part No.: 547990

Type: TULT24-8DS-1x50WH item: 1 ST.
Lieske Part No.: 198804

Type: TULT24-8DS-1x50YE item: 1 ST.
Lieske Part No.: 354957

Schrumpfrate 2:1. Halogenfrei. Erfüllt die höchsten Standards in Bezug auf Entflammbarkeit. Niedrige Rauchausbreitung, Dichte und Toxizität. Hoher Sauerstoffindex. Verfügbar in den Farben Weiß oder Gelb. Sonderfarben auf Anfrage. Kabeldurchmesser 1,2 mm bis 50,8 mm. Lieferung in praktischen, wiederverschließbaren Kartons. TLFX ist ein halogenfreier 2:1 Schrumpfschlauch, welcher die Anforderungen für die Bahnindustrie erfüllt. TLFX eignet sich vor allem für die Markierung von Leitungen in öffentlichen Gebäuden (beispielsweise Flughäfen, Krankenhäuser) und Verkehrsmitteln (beispielsweise Schienenfahrzeuge, Schiffe, Flugzeuge) sowie Tunnelbauten. Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucksysteme und Farbbänder. Mit dem entsprechenden Zubehör ist während des Druckvorgangs direkt das Perforieren oder Abschneiden des Schrumpfschlauches auf vorgegebene Längen möglich.
Lieske Part No.: 941164

Shrink ratio 2:1. Halogen-free. Meets the highest standards in terms of flammability. Low smoke spread, density and toxicity. High oxygen index. Available in white or yellow. Special colors on request. Cable diameter 1.2 mm to 50.8 mm. Supplied in practical, resealable boxes. TLFX is a halogen-free 2:1 shrink tubing that meets the requirements of the rail industry. TLFX is particularly suitable for marking cables in public buildings (e.g. airports, hospitals) and means of transport (e.g. rail vehicles, ships, aircraft) as well as tunnels. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tubing can be perforated or cut to specified lengths directly during the printing process.
Lieske Part No.: 2112201