Installation Material

PEC (Pinched End Caps). Thermoplastic inner adhesive for protection against external influences and for strain relief. Quick and easy processing. High shrink ratio covers a wide range of applications. PEC end caps offer excellent mechanical and electrical properties for protecting cable connections and cable splices in electrical engineering. These products are also suitable outside of electrical engineering for general protection of, for example, cable ends, small housings or pipes.
Sales unit: 50 pieces
Lieske Part No.: 1101092

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1349153

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 24 pieces
Lieske Part No.: 1131354

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 16 pieces
Lieske Part No.: 1596960

The voltage-resistant end caps with thermoplastic adhesive inner seal cables reliably and durably. The durable material protects against mechanical stresses. The high shrink ratio allows it to cover a large cross-sectional area with only a few sizes.
HellermannTyton end caps can be fitted on request also with air valves for pneumatic monitored telecommunications cable systems. Model: 1612-1 B8W-BK-item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 428820

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1131344

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1242555

Type: 1617-1-B8W2 PEX BK 1 ST

Lieske Part No.: 124334

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Low profile: space-saving design. Military and general performance use
Sales unit: 100 pieces
Lieske Part No.: 1239037

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Low profile: space-saving design. Military and general performance use
Sales unit: 100 pieces
Lieske Part No.: 1563682

Formschale: einteilig, farbig, wiederöffenbar, schlagfest, flammhemmend. Gefüllt mit RELICON Gel, hochisolierend, kennzeichnungsfrei. Mischen entfällt, einfachste Montage. UV und Wetter resistent. Unbegrenzt lagerfähig. Mit Verbinderblock. Montagefertig. System geprüft nach EN 50393 (entspricht DIN VDE 0278-393). IPX8 getestet. Die Geltechnologie von RELICON bietet besondere Vorteile. Sie ist einfach und schnell zu montieren. Die mit einem Filmscharnier verbundenen Formschalen sind aus schlagfestem Polypropylen (PP). Das RELICON Gel in der Schale übernimmt das Isolieren und Abdichten der Verbindung. Relifix ist eine universelle Verbindungs- und Abzweiggarnitur. Abhängig vom Klemmen-Typ kann sie für Verbindungen und Einzelabzweigungen benutzt werden. Sie wird verwendet mit Kunststoffkabeln und Leitungen aus PVC, PE, EPR und VPE wie N(A)YY, NYM und H05. Anwendungsgebiete: Im Niederspannungsnetz als Verbindungsgarnitur für beispielsweise die Außenbeleuchtung oder als Durchgangsgarnitur zur Kabelreparatur. In Installationskanälen und Innenräumen, im Erdreich, im Freien und im Wasser.
Lieske Part No.: 678508

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1330812

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 343925

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565689

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132274

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132261

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 312012

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057154

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132275

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 344054

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2129567

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565688

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057159

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 935268

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 928171

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 928098

Ideal for labelling RiteOn, HELASIGN, Arrowtag and the IMP plates. Also suitable for use on the marking binders. Very fast drying ink. Extremely UV resistant. Pack of 2 in red and black. The T82 marker pens are ideal for labelling a wide range of materials.
Lieske Part No.: 595559

Ideal for labelling RiteOn, HELASIGN, Arrowtag and the IMP plates. Also suitable for use on the marking binders. Very fast drying ink. Extremely UV resistant. Pack of 2 in red and black. The T82 marker pens are ideal for labelling a wide range of materials.
Lieske Part No.: 334512

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-A PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 295802

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-B PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 341517

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-C-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 672822

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-D PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 135610

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-E-PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 385863

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-F PVC YE-M4 Quantity: 1000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 656778

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG
-3-G-PVC YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 966530

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion.Type: HG
-3-H-PVC YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 107278

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-I-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 203974

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-J-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 162509

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG
-3-K PVC-YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 501824

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-L PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 156131

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-M-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 613868

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-N-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 666406

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-O-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 169130

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-P-PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 207331

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-Q-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 590519

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-R-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 654688

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-S-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 362541

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-T PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 699674

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG
3-U-PVC YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 705768

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-V PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 588721