Installation Material

Helagrip, aufschiebbar, mit Schnittnase, Artikelnummer: 515-03264
Aufschiebbarer Kabelmarkierer mit Schnittnase 4-9 mm gelb Aufdruck Z

Eigenschaften:

Leichtes Aufschieben der Kennzeichnungstüllen auf Kabel und Leitungen
Für die Kennzeichnung vor der Montage
Verdrehsichere Aneinanderreihung der Zeichenkombinationen durch die Schnittnase
Verfügbar in gelb und weiß sowie in den Farben des internationalen Widerstandsfarbcodes
Flexibles Material zur sicheren Kennzeichnung
Montagedorne (TJC) zur einfacheren Applikation verfügbar



Anwendung
Z.B. im Maschinen- und Schaltschrankbau, Starkstromanlagenbau, für Trassenführungen und Kabelschächte.

Lieferbar ist Helagrip im internationalen Widerstandsfarbcode mit Aufdruck 0–9 und in gelb mit Aufdrucken 0–9, A–Z, +, -, /, Punkt, . Außerdem sind sie auf Anfrage individuell oder mehrstellig bedruckt und ohne Aufdruck lieferbar. Bei kleinen Leitungen empfiehlt sich die Verwendung des Aufziehdorns AD oder des Montagedornes TJC.

Helagrip werden lose im Beutel oder aneinanderhängend auf einer Spule geliefert.
Helagrip, aufschiebbar, mit Schnittnase ist für folgende Industrie-Branchen geeignet

Solaranlagen
Windkraftanlagen
Schienenfahrzeugbau
Elektrogroßhandel
Luft- und Raumfahrt
Schiffbau
Verteidigungsindustrie
Sales unit: 250 pieces
Lieske Part No.: 812772

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-0-PVC-BK-G4 item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 687560

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-PVC YE-G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 860066

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion.Type: HG4-9-
PVC-BN G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 888242

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion.Type: HG4-9-
PVC YE-G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 892845

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-2-PVC RD G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 962334

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-2-PVC YE-G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 982484

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-3-PVC floor G4 item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 462620

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-3-PVC YE-G4 item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 553649

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-4 PVC-YE-G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 761890

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-5-PVC YE-G4 item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 639693

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-5-GN-PVC G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 709568

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-6-PVC YE-G4 item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 688820

Type: HG4-9-6-PVC-BU-G4

Sales unit: 250 pieces
Lieske Part No.: 717157

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-7-PVC YE-G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 102805

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-7-PVC VT G4 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 971274

Type: HG4-9-8-PVC-YE-G4

Sales unit: 250 pieces
Lieske Part No.: 916151

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-8-PVC GY-G4 item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 208951

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG4-9-9-PVC YE-G4 item:
ST.
Sales unit: 250 pieces
Lieske Part No.: 855867

Type: HG4-9-9-PVC-WH-G4

Sales unit: 250 pieces
Lieske Part No.: 160634

Helagrip, aufschiebbar, mit Schnittnase, Artikelnummer: 515-03704
Aufschiebbarer Kabelmarkierer mit Schnittnase 4-9 mm gelb Aufdruck +

Eigenschaften:

Leichtes Aufschieben der Kennzeichnungstüllen auf Kabel und Leitungen
Für die Kennzeichnung vor der Montage
Verdrehsichere Aneinanderreihung der Zeichenkombinationen durch die Schnittnase
Verfügbar in gelb und weiß sowie in den Farben des internationalen Widerstandsfarbcodes
Flexibles Material zur sicheren Kennzeichnung
Montagedorne (TJC) zur einfacheren Applikation verfügbar



Anwendung
Z.B. im Maschinen- und Schaltschrankbau, Starkstromanlagenbau, für Trassenführungen und Kabelschächte.

Lieferbar ist Helagrip im internationalen Widerstandsfarbcode mit Aufdruck 0–9 und in gelb mit Aufdrucken 0–9, A–Z, +, -, /, Punkt, . Außerdem sind sie auf Anfrage individuell oder mehrstellig bedruckt und ohne Aufdruck lieferbar. Bei kleinen Leitungen empfiehlt sich die Verwendung des Aufziehdorns AD oder des Montagedornes TJC.

Helagrip werden lose im Beutel oder aneinanderhängend auf einer Spule geliefert.
Helagrip, aufschiebbar, mit Schnittnase ist für folgende Industrie-Branchen geeignet

Solaranlagen
Windkraftanlagen
Schienenfahrzeugbau
Elektrogroßhandel
Luft- und Raumfahrt
Schiffbau
Verteidigungsindustrie
Sales unit: 250 pieces
Lieske Part No.: 812417

Helagrip, aufschiebbar, mit Schnittnase, Artikelnummer: 515-03714
Aufschiebbarer Kabelmarkierer mit Schnittnase 4-9 mm gelb Aufdruck -

Eigenschaften:

Leichtes Aufschieben der Kennzeichnungstüllen auf Kabel und Leitungen
Für die Kennzeichnung vor der Montage
Verdrehsichere Aneinanderreihung der Zeichenkombinationen durch die Schnittnase
Verfügbar in gelb und weiß sowie in den Farben des internationalen Widerstandsfarbcodes
Flexibles Material zur sicheren Kennzeichnung
Montagedorne (TJC) zur einfacheren Applikation verfügbar



Anwendung
Z.B. im Maschinen- und Schaltschrankbau, Starkstromanlagenbau, für Trassenführungen und Kabelschächte.

Lieferbar ist Helagrip im internationalen Widerstandsfarbcode mit Aufdruck 0–9 und in gelb mit Aufdrucken 0–9, A–Z, +, -, /, Punkt, . Außerdem sind sie auf Anfrage individuell oder mehrstellig bedruckt und ohne Aufdruck lieferbar. Bei kleinen Leitungen empfiehlt sich die Verwendung des Aufziehdorns AD oder des Montagedornes TJC.

Helagrip werden lose im Beutel oder aneinanderhängend auf einer Spule geliefert.
Helagrip, aufschiebbar, mit Schnittnase ist für folgende Industrie-Branchen geeignet

Solaranlagen
Windkraftanlagen
Schienenfahrzeugbau
Elektrogroßhandel
Luft- und Raumfahrt
Schiffbau
Verteidigungsindustrie
Sales unit: 250 pieces
Lieske Part No.: 812461

Helagrip, aufschiebbar, mit Schnittnase, Artikelnummer: 515-03724
Aufschiebbarer Kabelmarkierer mit Schnittnase 4-9 mm gelb Aufdruck /

Eigenschaften:

Leichtes Aufschieben der Kennzeichnungstüllen auf Kabel und Leitungen
Für die Kennzeichnung vor der Montage
Verdrehsichere Aneinanderreihung der Zeichenkombinationen durch die Schnittnase
Verfügbar in gelb und weiß sowie in den Farben des internationalen Widerstandsfarbcodes
Flexibles Material zur sicheren Kennzeichnung
Montagedorne (TJC) zur einfacheren Applikation verfügbar



Anwendung
Z.B. im Maschinen- und Schaltschrankbau, Starkstromanlagenbau, für Trassenführungen und Kabelschächte.

Lieferbar ist Helagrip im internationalen Widerstandsfarbcode mit Aufdruck 0–9 und in gelb mit Aufdrucken 0–9, A–Z, +, -, /, Punkt, . Außerdem sind sie auf Anfrage individuell oder mehrstellig bedruckt und ohne Aufdruck lieferbar. Bei kleinen Leitungen empfiehlt sich die Verwendung des Aufziehdorns AD oder des Montagedornes TJC.

Helagrip werden lose im Beutel oder aneinanderhängend auf einer Spule geliefert.
Helagrip, aufschiebbar, mit Schnittnase ist für folgende Industrie-Branchen geeignet

Solaranlagen
Windkraftanlagen
Schienenfahrzeugbau
Elektrogroßhandel
Luft- und Raumfahrt
Schiffbau
Verteidigungsindustrie
Sales unit: 1000 pieces
Lieske Part No.: 812481

Type: HCR 06-PE-CL

Lieske Part No.: 376178

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 801216

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 281266

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 299498

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 918937

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 648761

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 459966

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 581140

The versatile Helafix HC and HCR character carriers are suitable for temporary or permanent marking. You are using cable ties T series
attached 8, screws or rivets. For temporary marking can also be easily attached. Material and profile reliably protect the inserted label from moisture, contamination, damage and UV radiation. Helafix HC is precut and ready punched supplied in the bag. As Helafix HCR character carriers are available in rolls for individual further with the appropriate HCT tools. Type: HC
2 -
7-PE-CL item:
ST.
Lieske Part No.: 866414

The versatile Helafix HC and HCR character carriers are suitable for temporary or permanent marking. You are using cable ties T series
attached 8, screws or rivets. For temporary marking can therefore be Easily attached. material and profile Reliably protect the inserted label from moisture, . contamination, damage and UV radiation . Helafix HC is precut and ready Supplied punched in the bag . Helafix As HCR character carriers are available in rolls for individual HCT Further with the Appropriate Tools Type: HC
2-35 PE-CL item:
ST.
Lieske Part No.: 815044

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 412256

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 256677

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 447595

Versatile label holders for temporary or permanent labeling. Fastened with cable ties from the T18 series, screws or rivets. Reliable protection of the inserted label against moisture, contamination, damage and UV radiation. Helafix HC is supplied pre-cut and punched in a bag (type HC06 without a centered hole). Helafix HCR is supplied as roll material for individual further processing with HCT tools. HFX labels suitable for use with HC and HCR label holders. Helafix label holders are suitable for labeling cable harnesses, cables, pipes, transport systems, valves, sensors and for inventory labeling on machines or other parts.
Lieske Part No.: 562468

The versatile Helafix HC and HCR character carriers are suitable for temporary or permanent marking. You are using cable ties of the T series
8, screws or rivets. For temporary marking can also be easily attached. Material and profile reliably protect the inserted label from moisture, contamination, damage and UV radiation. Helafix HC is precut and ready punched supplied in the bag. As Helafix HCR character carriers are available in rolls for individual further with the appropriate HCT tools. Type: HC
8-7 PE-CL item:
MTR
Lieske Part No.: 768835

Type: HCR24-PE-CL

Lieske Part No.: 287636

Type: HC24-52-PE-CL

Lieske Part No.: 736419

The versatile Helafix HC and HCR character carriers are suitable for temporary or permanent marking. You are using cable ties of the T series
8, screws or rivets. For temporary marking can also be easily attached. Material and profile reliably protect the inserted label from moisture, contamination, damage and UV radiation. Helafix HC is precut and ready punched supplied in the bag. As Helafix HCR character carriers are available in rolls for individual further with the appropriate HCT tools. Type: HC24-7-PE-CL item:
MTR
Lieske Part No.: 982231

Laser-printable HFX labels, without adhesive. For use with Helafix marking carriers (HC and HCR). Two-coloured sheets (front yellow, back white). DIN A4 format. Can be labelled by hand using the T82 marking pen. Easy printing and simple and efficient label design using the TagPrint Pro software. MS-Windows Word print templates at www.HellermannTyton.de (media library). The marking carrier system, consisting of a marking carrier and label, is suitable for indoor applications for flexible labelling, for example of switchgear and machines. Labelling is possible using standard laser printers or by hand using the T82 marking pen.
Lieske Part No.: 426972

Laser-printable HFX labels, without adhesive. For use with Helafix marking carriers (HC and HCR). Two-coloured sheets (front yellow, back white). DIN A4 format. Can be labelled by hand using the T82 marking pen. Easy printing and simple and efficient label design using the TagPrint Pro software. MS-Windows Word print templates at www.HellermannTyton.de (media library). The marking carrier system, consisting of a marking carrier and label, is suitable for indoor applications for flexible labelling, for example of switchgear and machines. Labelling is possible using standard laser printers or by hand using the T82 marking pen.
Lieske Part No.: 367545

Laser-printable HFX labels, without adhesive. For use with Helafix marking carriers (HC and HCR). Two-coloured sheets (front yellow, back white). DIN A4 format. Can be labelled by hand using the T82 marking pen. Easy printing and simple and efficient label design using the TagPrint Pro software. MS-Windows Word print templates at www.HellermannTyton.de (media library). The marking carrier system, consisting of a marking carrier and label, is suitable for indoor applications for flexible labelling, for example of switchgear and machines. Labelling is possible using standard laser printers or by hand using the T82 marking pen.
Lieske Part No.: 966987

Laser-printable HFX labels, without adhesive. For use with Helafix marking carriers (HC and HCR). Two-coloured sheets (front yellow, back white). DIN A4 format. Can be labelled by hand using the T82 marking pen. Easy printing and simple and efficient label design using the TagPrint Pro software. MS-Windows Word print templates at www.HellermannTyton.de (media library). The marking carrier system, consisting of a marking carrier and label, is suitable for indoor applications for flexible labelling, for example of switchgear and machines. Labelling is possible using standard laser printers or by hand using the T82 marking pen.
Lieske Part No.: 518524

Laser-printable HFX labels, without adhesive. For use with Helafix marking carriers (HC and HCR). Two-coloured sheets (front yellow, back white). DIN A4 format. Can be labelled by hand using the T82 marking pen. Easy printing and simple and efficient label design using the TagPrint Pro software. MS-Windows Word print templates at www.HellermannTyton.de (media library). The marking carrier system, consisting of a marking carrier and label, is suitable for indoor applications for flexible labelling, for example of switchgear and machines. Labelling is possible using standard laser printers or by hand using the T82 marking pen.
Lieske Part No.: 882883

Type: HODS50 / PVC YE 1000 ST

Sales unit: 5000 pieces
Lieske Part No.: 135212

Oval marking grommets suitable for AT1, AT2 or AT3 (depending on size). Ideal for maintenance and repair work, for fastening with cable ties. Also suitable for direct application to cables and lines before assembly. Available in yellow and in the colors of the international resistance color code. For example in local and long-distance transport (buses and trains), machine and switch cabinet construction, power plant construction, for route guidance and cable ducts. Ovalgrip marking grommets are available in the international resistance color code with imprint 0-9 and yellow with imprint 0-9, AZ, +, -, /, dot, earthing symbol. Ovalgrip are supplied loose in a bag or attached to one another on a spool.
Sales unit: 1000 pieces
Lieske Part No.: 1190152

Oval marking grommets suitable for AT1, AT2 or AT3 (depending on size). Ideal for maintenance and repair work, for fastening with cable ties. Also suitable for direct application to cables and lines before assembly. Available in yellow and in the colors of the international resistance color code. For example in local and long-distance transport (buses and trains), machine and switch cabinet construction, power plant construction, for route guidance and cable ducts. Ovalgrip marking grommets are available in the international resistance color code with imprint 0-9 and yellow with imprint 0-9, AZ, +, -, /, dot, earthing symbol. Ovalgrip are supplied loose in a bag or attached to one another on a spool.
Sales unit: 1000 pieces
Lieske Part No.: 1189970

Type: HODS50-+-PVC-YE-M4

Sales unit: 1000 pieces
Lieske Part No.: 665992