Installation Material

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 310613

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 2026625

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1987859

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 780282

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 447273

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 134011

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 798782

Type: WIC2-F-PA-YE-T1

Sales unit: 1000 pieces
Lieske Part No.: 468001

Type: WIC2-G G PA66 YE 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 548580

Type: WIC2-H-PA-YE-T1

Sales unit: 1000 pieces
Lieske Part No.: 365871

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1190199

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 624323

WIC (R) Kennzeichnungsmarkierer The WIC (R) Kennzeichnungsmarkierer are particularly suitable for after-träglichen mounting on cables. The installation simply by click-through tool. The high voltage of the marker material is firmly attached to cables. Especially suitable for cabinet and power plant construction. The assortments are included tool PU: WIC
, WIC2 = 2 pieces WIC3 =
Each Material: Polyamide 6.6 International resistor color code and yellow Operating Temperature: -4 ° C to +85 ° C, briefly up to +
5 ° C Flammability: Self-extinguishing according to UL 94 V Cable Ø: Ø 2.8 to 3.8 mm, cross-section
, 5, - 2.5 mm ² Version: Length 6, Model: WIC2-PA-9-YE-T

ST.
Sales unit: 1000 pieces
Lieske Part No.: 512568

Type: WIC2-J-PA-YE-T1

Sales unit: 1000 pieces
Lieske Part No.: 410237

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 694996

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 278577

Type: WIC2-M M PA66 YE 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 599293

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 828555

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 213960

Type: WIC2-Q Q PA66 YE 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 370261

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 139223

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 556493

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 413019

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 455930

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 677233

Type: WIC2-X-PA-YE-T1

Sales unit: 1000 pieces
Lieske Part No.: 750710

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 150689

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 2 markers on. Type: WIC2 PA66-BK
ST item: 2 ST.
Sales unit: 1000 pieces
Lieske Part No.: 861196

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 400713

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 20 markers on. Type: WIC2 PA66-1 ST 1 BN 1000
Sales unit: 1000 pieces
Lieske Part No.: 689766

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 755605

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 20 markers on. Type: WIC2 PA66-2 2 RD 1000 ST
Sales unit: 1000 pieces
Lieske Part No.: 490617

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 264897

Type: WIC2-3 3 PA66 OG 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 529843

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 756120

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 584155

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 132459

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 246080

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 577820

Type: WIC2-6 6 PA66 BU 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 993454

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 408421

Type: WIC2-7 7 PA66 VT 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 713159

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 104057

Type: WIC2-8 8 PA66 GY 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 409905

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 392338

Type: WIC2-9 9 PA66 WH 1000 ST

Sales unit: 1000 pieces
Lieske Part No.: 189409

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 308791

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 141349

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables.The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 2 markers on. Type: WIC2-/-PA-YE-T

ST.
Sales unit: 1000 pieces
Lieske Part No.: 734883

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool.The WIC Tool tool can be used for all sizes and takes up to 20 markers on. Type: WIC2-<ground/> earth symbol PA66 YE 1000
Sales unit: 1000 pieces
Lieske Part No.: 607825