Installation Material

CADDY CN connecting link
Diameter in mm: 3.0 mm Type: KN30


Item: 100 ST.
Lieske Part No.: 229684

CADDY CN connecting link
diameter in mm: 4.0 mm Type: KN40


Item: 100 ST.
Lieske Part No.: 639053

CADDY CN connecting link
Diameter in mm: 5.0 mm

Type: KN50
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 122914

Mounting rail for the production of trapezes, structures and bracing, type A. 2 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 232807

CADDY TKN bracket for threaded rods M6, M8, M10, M12 diameters in mm: M6 Type: TKN / M6 Quantity: 140 ST.
Sales unit: 140 pieces
Lieske Part No.: 193560

CADDY TKN clamp for threaded rod M6, M8, M
, M
2 mm in diameter: M8 Type: TKNM8 P

ST.
Lieske Part No.: 842259

CADDY TKN clip
for threaded rods M6, M8, M10, M12
Diameter in mm: M10

Type: TKN/M10
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 134091

Mounting rail for the production of trapezes, structures and bracing, type C. 2 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 943961

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 441021

For securing objects to nVent CADDY Eristrut rails.
Sales unit: 25 pieces
Lieske Part No.: 1316713

Washer for installation in conjunction with mounting rails.
Lieske Part No.: 2068179

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 25 pieces
Lieske Part No.: 199740

For making metal frames with nVent CADDY Eristrut rails.
Lieske Part No.: 577296

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 25 pieces
Lieske Part No.: 1316712

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 438788

For making metal frames with nVent CADDY Eristrut rails.
Lieske Part No.: 913425

Flat angle for making frames and structures with mounting rails.
Sales unit: 10 pieces
Lieske Part No.: 489215

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 25 pieces
Lieske Part No.: 581702

For making metal frames with nVent CADDY Eristrut rails.
Lieske Part No.: 765022

90° mounting bracket for creating strut mounting rail frames and structures, 2 holes. Hot dip galvanized steel, 1-1 mounting bracket, 50mm x 48mm. Right, 90 degree angle.
Sales unit: 10 pieces
Lieske Part No.: 1316707

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 1262638

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 989626

For making metal frames with nVent CADDY Eristrut rails.
Lieske Part No.: 181893

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 315762

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 248060

90° mounting bracket for creating strut mounting rail frames and structures, 4 holes. Hot-dip galvanized steel, 2-2 hole angle connector, 102 mm x 86 mm.
Sales unit: 10 pieces
Lieske Part No.: 1316706

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 1262637

Reinforced 90° mounting bracket for creating strut mounting rail frames and structures, 4 holes. Hot dip galvanized steel, 2-2 hole corner bracket, right hand, 106mm x 89mm.
Lieske Part No.: 141253

Angles for mounting rails for creating frames and structures.
Lieske Part No.: 1316748

Complete with U-bolts and nuts. Assembly in pairs required.
Lieske Part No.: 2068229

T-shaped mounting bracket for creating strut mounting rail frames and structures. Hot dip galvanized steel, triple, double corner connector with eight holes, 43 mm x 140 mm x 102 mm.
Lieske Part No.: 562060

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 5 pieces
Lieske Part No.: 721506

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 5 pieces
Lieske Part No.: 1262625

Connectors for mounting rails for producing frames and structures.
Sales unit: 5 pieces
Lieske Part No.: 1316710

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 5 pieces
Lieske Part No.: 1316708

Connector used to join two Type A mounting rails together to create frames and structures. Four hole male coupler made from hot dip galvanized steel for 41mm x 41mm mounting rail. Screws not included.
Sales unit: 5 pieces
Lieske Part No.: 639048

Connectors for mounting rails for producing frames and structures.
Sales unit: 5 pieces
Lieske Part No.: 398591

For making metal frames with nVent CADDY Eristrut rails.
Lieske Part No.: 2068230

Angles for mounting rails for creating frames and structures.
Lieske Part No.: 1262636

Angles for mounting rails for creating frames and structures.
Sales unit: 5 pieces
Lieske Part No.: 1262635

Angles for mounting rails for creating frames and structures.
Sales unit: 5 pieces
Lieske Part No.: 1262482

Angles for mounting rails for creating frames and structures.
Sales unit: 5 pieces
Lieske Part No.: 440592

Angles for mounting rails for creating frames and structures.
Sales unit: 5 pieces
Lieske Part No.: 652619

For attaching threaded rods, chains and steel cables to ceilings.
Sales unit: 100 pieces
Lieske Part No.: 1264063

For attaching threaded rods, chains and steel cables to walls.
Sales unit: 100 pieces
Lieske Part No.: 1264048

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 5 pieces
Lieske Part No.: 2068232

Complete with U-bolts and nuts. Assembly in pairs required.
Sales unit: 10 pieces
Lieske Part No.: 1264056

Base for building metal frames for attachment to nVent CADDY Eristrut.
Lieske Part No.: 309852

Single joint adapter for attachment to mounting rails.
Sales unit: 10 pieces
Lieske Part No.: 1317398

Base plate for attaching mounting rails to walls or floors.
Lieske Part No.: 205920