Quantity: 10 ST.
Sales unit: 1500 pieces
Lieske Part No.: 465592

Quantity: 5 ST.
Sales unit: 210 pieces
Lieske Part No.: 465593

Quantity: 3 ST.
Sales unit: 96 pieces
Lieske Part No.: 465594

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Sehr gute Brandschutzeigenschaften. Beständig gegen Lösungsmittel, Säuren und Laugen. UV- und witterungsbeständig. Zulassung für Schiffahrt. HA40 ist ein dickwandiger 4:1 Schrumpfschlauch mit Innenkleber für den optimalen Schutz und Isolation von Kabeln und Leitungen im Schiffbau und in maritimen Anwendungen. Neben guter Brandschutzeigenschaften bietet MA40 eine gute UV-, Witterungs- und Salzwasserbeständigkeit.
Sales unit: 70 pieces
Lieske Part No.: 467454

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. HA40 is a thick-walled 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 240 meters
Lieske Part No.: 1134232

Thick-walled heat shrink tubing. Halogen-free. Self-extinguishing. Low smoke density. DIN EN 45545-2 (HL3) approved. High shrink ratio 4:1. The thick-walled heat shrink tubing HR47 is halogen-free, self-extinguishing and has a low smoke density. The product also offers good mechanical protection as well as abrasion and kink protection, for example. These properties are ideal for applications with high concentrations of people, such as in trains, buses, airplanes, tunnels and elevators.
Sales unit: 960 pieces
Lieske Part No.: 1583880

Type: HU47-19/6 PEX BK 40 ST

Sales unit: 480 pieces
Lieske Part No.: 571592

Type: HU47-33/8 PEX BK 18 ST

Sales unit: 18 pieces
Lieske Part No.: 557704

Quantity: 10 ST.
Sales unit: 380 pieces
Lieske Part No.: 279307

Quantity: 8 ST.
Sales unit: 376 pieces
Lieske Part No.: 279238

The sturdy, thick-walled heat shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Due to the high shrink ratio, the high hose diameter differences adjusts easily. Type: HU47-130 / 36 to 1000-BK item: 4 ST.
Sales unit: 4 pieces
Lieske Part No.: 252183

Dickwandiger Warmschrumpfschlauch. Halogenfrei. Selbstverlöschend. Geringe Rauchgas-Dichte. Große Schrumpfrate 4:1. Der dickwandinge Warmschrumpfschlauch HU47 ist halogenfrei, selbstverlöschend und hat eine geringe Rauchgas-Dichte. Außerdem bietet das Produkt einen guten mechanischen Schutz sowie zum Beispiel Abrieb- und Knickschutz. Diese Eigenschaften eigenen sich hervorragend für Anwendungen mit hohen Personenkonzentrationen, wie zum Beispiel in Bahnen, Bussen, Flugzeugen, Tunneln und Fahrstühlen.
Sales unit: 4 pieces
Lieske Part No.: 494863

The sturdy, thick-walled heat shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Due to the high shrink ratio, the high hose diameter differences adjusts easily. Type: HU47-180 / 50 to 1000-BK item: 2 ST.
Sales unit: 100 pieces
Lieske Part No.: 711624

Thick-walled: very good abrasion, kinking and cutting protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. HA47 offers reliable insulation and protection for cable connections and terminations, also suitable for use in the ground. Strain relief for cable-plug transitions and protection against extreme mechanical stress.
Sales unit: 60 pieces
Lieske Part No.: 2055169

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-
3/4-
-BK Quantity: 8 ST.
Sales unit: 80 pieces
Lieske Part No.: 505137

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-19/6-1000-BK Quantity: 40 ST.
Sales unit: 40 pieces
Lieske Part No.: 223633

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-33/8-1000-BK item: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 366912

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-45 /
2 -
-BK Quantity:
ST.
Sales unit: 10 pieces
Lieske Part No.: 978280

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to Solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive . did Provides reliable protection from moisture and other environmental influences after melting Type: HA47-51/16-1000-BK item: 8 ST.
Sales unit: 8 pieces
Lieske Part No.: 208065

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-68/22-
-BK Package: 5 ea.
Sales unit: 5 pieces
Lieske Part No.: 764481

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-85/25-1000-BK item: 4 ST.
Sales unit: 4 pieces
Lieske Part No.: 289901

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-105/30-1000-BK item: 3 ST.
Sales unit: 3 pieces
Lieske Part No.: 482447

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress.It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-130/36-1000-BK item: 3 ST.
Sales unit: 3 pieces
Lieske Part No.: 563676

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences. Type: HA47-160/50-1000-BK item: 2 ST.
Sales unit: 2 pieces
Lieske Part No.: 434210

The sturdy, thick-walled shrink tubing is highly resistant to mechanical stress. It is resistant to solvents, acids and alkalis. Because of the high shrinkage rate of the tube is large differences in diameter fits easily. HA47 is coated inside with a thermoplastic adhesive that provides reliable protection from moisture after melting and other environmental influences.Type: HA47-
8/5 -
BK-item: 2 ST.
Sales unit: 3 pieces
Lieske Part No.: 997028

Type: HA67-19,0/3,2-PEX-BK

Lieske Part No.: 248516

Type: HA67-33,0/5,5-PEX-BK

Sales unit: 3 pieces
Lieske Part No.: 829748

Type: HA67-44,4/7,4-PEX-BK

Lieske Part No.: 352349

Type: HA67-50,8/8,3-PEX-BK

Sales unit: 2 pieces
Lieske Part No.: 673157

Type: HA67-69,8/11,7-PEX-B

Sales unit: 2 pieces
Lieske Part No.: 982400

Type: HA67-88,9/17,1-PEX-B

Sales unit: 2 pieces
Lieske Part No.: 427163

Thick-walled: very good abrasion, kinking and cut protection. 6:1 covers a very wide range of applications, very high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. HA67 is particularly suitable for mechanical protection, insulation and sealing with large diameter differences, complex connector configurations or difficult geometric shapes.
Sales unit: 2 pieces
Lieske Part No.: 1235999

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX HA47 is a thick-walled 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX HA47 is available in 6 sizes from 19 mm to 85 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX HA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX HA47 offers very good mechanical strength.
Lieske Part No.: 893760

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX HA47 is a thick-walled 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX HA47 is available in 6 sizes from 19 mm to 85 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX HA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX HA47 offers very good mechanical strength.
Lieske Part No.: 102785

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 10 meters
Lieske Part No.: 2057424

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 5 meters
Lieske Part No.: 991331

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 4 meters
Lieske Part No.: 991338

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 3 meters
Lieske Part No.: 1134306

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 2 meters
Lieske Part No.: 1327346

Schrumpfschlauch mittelwandig. Schrumpfrate 4:1 für großen Anwendungsbereich und hohen Anpressdruck. thermoplastischer Innenkleber zum Schutz vor Feuchtigkeit und zur Zugentlastung. halogenfrei. Beständig gegen Lösungsmittel, Säuren und Laugen. Stangenware mit einer Länge von 1m. MA47 ist ein mittelwandiger 4:1 Schrumpfschlauch und zeichnet sich durch besonders gute mechanische Festigkeit aus. Das hohe Schrumpfverhältnis und der Innenkleber schützen Stecker-Kabel-Übergänge vor Umgebungseinflüssen und Korrosion sowie vor Staub und Schmutz und sorgen zudem für eine hohe Zugentlastung. MA47 bietet Schutz für Kabel und Leitungen vor höheren mechanischen Beanspruchungen, z. B. auf und unter der Erde.
Sales unit: 20 pieces
Lieske Part No.: 547862

Medium-walled shrink tubing. Shrinkage ratio 4:1 for a wide range of applications and high contact pressure. Thermoplastic inner adhesive for protection against moisture and for strain relief. Halogen-free. Resistant to solvents, acids and alkalis. Bar stock with a length of 1m. MA47 is a medium-walled 4:1 shrink tubing and is characterized by particularly good mechanical strength. The high shrinkage ratio and the inner adhesive protect plug-cable transitions from environmental influences and corrosion as well as from dust and dirt and also ensure high strain relief. MA47 offers protection for cables and lines against higher mechanical stress, e.g. above and below ground.
Lieske Part No.: 135233

The wall tubing MA47 medium wall is resistant to solvents, acids and alkaline solutions and offers especially good mechanical strength. The thermoplastic adhesive liner provides good moisture sealing and weathering.
TREDUX MA47 is packed in display boxes. The favorable length of 1 m sections allows individual configuration of the required hose sizes. Type: TREDUX-MA47-50/16, 1M item: 2 ST.
Sales unit: 2 pieces
Lieske Part No.: 112280

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Sales unit: 2 pieces
Lieske Part No.: 195114

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Sales unit: 2 pieces
Lieske Part No.: 704311

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Sales unit: 2 pieces
Lieske Part No.: 902620

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-1/8-FPM-BK item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 393900

Viton ®-E is a robust high performance pants of very flexible fluoroelastomer, Which is Characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The pant is VG-approved. Type: VITONE-1/4-FPM-BK item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 694580

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-3/8-FPM-BK item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 390590

Standard wall (between thin and medium wall). Excellent mechanical and chemical resistance at very high temperatures. Highly resistant to fuels and lubricants. Very good fire protection properties. Approved for military technology. Viton-E is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its excellent mechanical and chemical resistance at high temperatures. Due to its excellent properties under extreme loads, the shrink tubing can be used in many different ways, e.g. in aviation and military technology.
Sales unit: 25 meters
Lieske Part No.: 524196

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-3/4-FPM-BK item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 879057