Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german language Industry-Electronics in English

Buy Shrink Tubing

Shrink tubings are made of synthetic material and become very tight when exposed to heat. They isolate and protect from mechanical and electrical damage. A shrink tubing's diameter reaches from 1 to 1100 mm. The change in size when shrinking varies strongly depending on the material of the hose's synthetics. The shrinking proportion differs from 2:1 to 6:1. When it comes to certain seals, it can also be 10:1.

A hot glue on the inside is responsible for a good sealing. For best results, many manufacturers recommend a ratio of 4:5. A distinction of shrink tubings is made regarding their diameter, wall thickness and shrinking ratio.

Manufacturer no.DescriptionPriceAnzahl Bestellen
Cellpack 295167
Cellpack CWS 250A 24kV 16-95/ - CWS250A24kV16 95 / / EGA angle plug connector incl Erdung 295 167
Cellplux angle cable plug connectors CWS are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 24 kV with device plug connectors for outer cone systems type A according to EN 50180 and EN 50181.
Lieske Part No.: 983253
481,24 EUR
Graduated prices
Cellpack 295283Cellpack CGS/250A/24KV/25-95/EGA (295283)
Cellplux gerade Kabelsteckanschlüsse CGS eignen sich zum Anschluss aller kunststoffisolierten Einleiterkabel (PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) sowie Schirmgestaltungen (Draht- oder Bandschirm) an Schaltanlagen und Transformatoren fu¨r maximale Netzspannung bis 24 kV mit Gerätesteckanschlüssen fu¨r Außenkonus-Systeme Typ A nach EN 50180 und EN 50181 Verkaufseinheit: 1 ST.
Lieske Part No.: 508912
457,92 EUR
Graduated prices
Cellpack 302227Cellpack CPS/Prüfset/CTS/CTKS/36kV (302227)
Prüfset CPS dient der galvanischen Kopplung zwischen den Kabelleitern an allen Cellplux T-Steckanschlüssen Typ CTS und Typ CTKS. Verkaufseinheit: 1 ST.
Lieske Part No.: 512855
1.319,77 EUR
Graduated prices
Cellpack 302333
Cellpack SRF SEH4/150 55/B shrink distribution cap 4 core 302333 - SEH4/150-55/schwarz
Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 2128078
383,33 EUR
Graduated prices
Cellpack 309514
Cellpack CHESK-I/12kV/70-150/KS (309514)
CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 1585896
260,20 EUR
Graduated prices
Cellpack 309522
Cellpack 309522 - CHESK / 24KV / 25 95 / KS indoor raumendverschluss
CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 999443
254,44 EUR
Graduated prices
Cellpack 309523
Cellpack CHESK-I/24kV/50-150/ - CHESK / 24kV / 50 150 / KS indoor raumendverschluss 309 523
CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 686206
270,50 EUR
Graduated prices
Cellpack 309525
Cellpack CHESK-I/24kV/95-240/KS - CHESK / 24kV / 95 240 / KS indoor raumendverschluss 24 kV 309525
CHESK-I hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 574433
286,54 EUR
Graduated prices
Cellpack 309526Cellpack CHESK-I/24kV/240-400/KS (309526)
Hybrid-Endverschlüsse CHESK-I eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Kupferdraht- oder Bandschirm). Mit Schraubkabelschuhen für Hauptleiter und Kupferdrahtschirm. Verkaufseinheit: 1 ST.
Lieske Part No.: 512922
404,82 EUR
Graduated prices
Cellpack 309534Cellpack CHESK-F/12kV/25-95/KS (309534)
Hybrid-Endverschlüsse CHESK-F eignen sich für alle 1-Leiter-Kunststoffkabel (PVC, PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) und Schirmgestaltungen (Kupferdraht- oder Bandschirm). Mit Schraubkabelschuhen für Hauptleiter und Kupferdrahtschirm. Verkaufseinheit: 1 ST.
Lieske Part No.: 512921
341,90 EUR
Graduated prices
Cellpack 309537
Cellpack CHESK-F/12KV/240-400/KS - CHESK / 12KV / 240 400 / KS freedom luftendverschluss 12kV 309
CHESK-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 991121
425,54 EUR
Graduated prices
Cellpack 309546
Cellpack CHESK-F/24kV/50-150/KS - CellPac CHESK / 24 kV / 50 150 / KS outdoor termination 24kV 309
CHESK-F hybrid terminations are suitable for all 1-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs for main conductors and copper wire shield.
Lieske Part No.: 576953
330,13 EUR
Graduated prices
Cellpack 309807
Cellpack ASEH CHESK-3I/A/24kV/95-240/KS (309807)
CHESK-3I(A) hybrid terminations are suitable for all 3-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs.
Lieske Part No.: 1587696
353,10 EUR
Graduated prices
Cellpack 309821
Cellpack ASEH CHESK-3F/A/24kV/95-240/KS (309821)
CHESK-3F(A) hybrid terminations are suitable for all 3-core plastic cables (PVC, PE, XLPE, EPR) with different conductive layers (graphitized, removable or peelable) and shield designs (copper wire or tape shield). With screw cable lugs.
Lieske Part No.: 1587697
530,59 EUR
Graduated prices
Cellpack 335121
Cellpack Power-Gel 1000ml - Power Gel 1000ml elastic transparent 335 121
Individually dosable 2-component potting compound in bottles as an all-in-one solution with mixing cup and spatula for the reliable protection of electrical and electronic components.
Lieske Part No.: 648357
121,31 EUR
Graduated prices
Cellpack 349967Cellpack SMHSV4/240-400 (349967)
Universell verwendbar zum Verbinden von Kunststoffkabeln mit Isolierungen aus PVC, PE und VPE (z. B. N(A)YY, NYM, TT). Mit Schraubverbindern mit Abreiskopfschrauben, geeignet für Aluminium- und Kupferleiter. Verkaufseinheit: 1 ST.
Lieske Part No.: 687860
524,55 EUR
Graduated prices
Cellpack 355433
Cellpack CTS 630A 24KV 95-240 (355433)
The screwable Cellplux CTS cable plug connectors are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 36 kV with device plug connectors for outer cone systems type C according to EN 50180 and EN 50181.
Lieske Part No.: 1351496
900,23 EUR
Graduated prices
Cellpack 355434
Cellpack CTS 630A 24KV 25-70 (355434)
The screwable Cellplux CTS cable plug connectors are suitable for connecting all plastic-insulated single-core cables (PE, VPE, EPR) with different conductive layers (graphitized, removable or peelable) as well as shield designs (wire or tape shield) to switchgear and transformers for maximum mains voltage up to 36 kV with device plug connectors for outer cone systems type C according to EN 50180 and EN 50181.
Lieske Part No.: 1351497
791,16 EUR
Graduated prices
Cellpack 355561Cellpack CTS/630A/24KV/240-400 (355561)
Die schraubbaren Cellplux Kabelsteckanschlüsse CTS eignen sich für den Anschluss von allen kunststoffisolierten Einleiterkabeln (PE, VPE, EPR) mit unterschiedlichen Leitschichten (graphitiert, abzieh- oder abschälbar) sowie Schirmgestaltungen (Draht- oder Bandschirm) an Schaltanlagen und Transformatoren für maximale Netzspannung bis 36 kV mit Gerätesteckanschlüssen für Außenkonus-Systeme Typ C nach EN 50180 und EN 50181. Verkaufseinheit: 1 ST.
Lieske Part No.: 690688
1.059,16 EUR
Graduated prices
Cellpack 357683
Cellpack SRGM SMHSV5/6-50 (357683)
Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344041
112,25 EUR
Graduated prices
Cellpack 357687
Cellpack SRGM SMHSV5/16-95 (357687)
Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344040
136,04 EUR
Graduated prices
Cellpack 357689
Cellpack SRGM SMHSV5/50-150 (357689)
Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344039
174,11 EUR
Graduated prices
Cellpack 357710
Cellpack SRGM SMHSV5/95-240 (357710)
Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). With screw connectors with tear-off head screws, suitable for aluminum and copper conductors.
Lieske Part No.: 1344038
273,43 EUR
Graduated prices
Cellpack 360710
Cellpack SEMH5-K 6-35 (360710)
For the voltage-resistant termination of unarmoured plastic cables as well as plastic cables with concentric conductors with insulation made of PVC, PE and XLPE (e.g. N(A)YY, N(A)XY, TT, N(A)2Y2Y, N(A)2X2Y, N(A)YC(W)Y).
Lieske Part No.: 1588147
23,11 EUR
Graduated prices
Cellpack 364304Cellpack SEMH5/2.5-16 (364304)
Für den spannungsfesten Endabschluss von unarmierten Kunststoffkabeln sowie von Kunststoffkabeln mit konzentrischem Leiter mit Isolierungen aus PVC, PE und VPE (z. B. N(A)YY, N(A)XY, TT, N(A)2Y2Y, N(A)2X2Y, N(A)YC(W)Y). Verkaufseinheit: 1 ST.
Lieske Part No.: 831365
42,24 EUR
Graduated prices
Cellpack 443960
Cellpack heat shrink tubing thick walled 443960 - SRH3/22-5/BK/1000mm
The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 2121733
248,49 EUR
Graduated prices
Cellpack 443980
Cellpack SRH3/48 12/1000MM/Black heat shrink tubing thick walled 443980 - SRS3
The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 2094389
361,75 EUR
Graduated prices
Cellpack 444005
Cellpack thick walled heat shrink tubing 444005 - SRH3/63-15/BK/1000mm
The heat shrink tubing type SRH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 2094390
401,15 EUR
Graduated prices
Cellpack 456330
Cellpack heat shrinkable crimp connector 456330 - DR 1/0.5-1.5/Set/20x/RD
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051653
88,80 EUR
Graduated prices
Cellpack 456331
Cellpack heat shrinkable crimp connector 456331 - DR 2/1.5-2.5/Set/20x/BU
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051654
108,00 EUR
Graduated prices
Cellpack 456332
Cellpack heat shrinkable crimp connector 456332 - DR 3/4-6/Set/20x/YE
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2062571
134,40 EUR
Graduated prices
Cellpack 456333
Cellpack heat shrinkable crimp connector 456333 - DR 1/0.5-1.5/Set/100x/RD
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051655
115,20 EUR
Graduated prices
Cellpack 456334
Cellpack heat shrinkable crimp connector 456334 - DR 2/1.5-2.5/Set/100x/BU
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051656
96,00 EUR
Graduated prices
Cellpack 456335
Cellpack heat shrinkable crimp connector 456335 - DR 3/4-6/Set/100x/YE
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051657
177,60 EUR
Graduated prices
Cellpack 456336
Cellpack heat shrinkable crimp connector 456336 - DR-L/1.5-2.5/Set/20x/BU
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2062572
115,20 EUR
Graduated prices
Cellpack 456337
Cellpack heat shrink crimp connector 456337 - DR-L/1.5-2.5/Set/100x/BU
Durable and reliable connectors for the most extreme applications. Hot glue seals the connection point completely.
Sales unit: 100 pieces
Lieske Part No.: 2051658
105,60 EUR
Graduated prices
Cellpack 456343
Cellpack roller spring permanently elastic contacting 456343 - RF/4/16-500mm/Set/10x
Suitable for use on lead and aluminum cable sheaths, adhesive tapes or cable shielding wires and steel or aluminum armouring wires.
Sales unit: 10 pieces
Lieske Part No.: 2051659
103,20 EUR
Graduated prices
Cellpack 457267
Cellpack heat shrink tubing thin wall 457267 - SR1F/2.4-1.2/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2128640
25,34 EUR
Graduated prices
Cellpack 457269
Cellpack heat shrink tubing thin wall 457269 - SR1F/4.8-2.4/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 110268
32,27 EUR
Graduated prices
Cellpack 457280Cellpack heat shrink tubing thin wall 457280 - SR1F/6.4-3.2/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1102680
40,79 EUR
Graduated prices
Cellpack 457281
Cellpack heat shrink tubing thin wall 457281 - SR1F/9.5-4.8/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1102686
45,94 EUR
Graduated prices
Cellpack 457282
Cellpack heat shrink tubing thin wall 457282 - SR1F/12.7-6.4/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2135522
50,69 EUR
Graduated prices
Cellpack 457283
Cellpack heat shrink tubing thin wall 457283 - SR1F/19.1-9.5/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2115998
66,33 EUR
Graduated prices
Cellpack 457284Cellpack SR1F/25.4-12.7/BK/1000mm (457284)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 838814
106,92 EUR
Graduated prices
Cellpack 457285Cellpack thin walled heat shrink tubing 457285 - SR1F/38.1-19.1/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1062552
17,27 EUR
Graduated prices
Cellpack 457286Cellpack heat shrink tubing thin wall 457286 - SR1F/51-25.4/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 680631
23,64 EUR
Graduated prices
Cellpack 457287Cellpack thin walled heat shrink tubing 457287 - SR1F/76-38/BK/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1062553
414,41 EUR
Graduated prices
Cellpack 457293Cellpack SR1F/4.8-2.4/GNYE/1000mm (457293)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 871622
45,94 EUR
Graduated prices
Cellpack 457295Cellpack thin walled heat shrink tubing 457295 - SR1F/9.5-4.8/GNYE/1000mm
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1062554
63,76 EUR
Graduated prices
Cellpack 457296Cellpack SR1F/12.7-6.4/GNYE/1000mm (457296)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 838818
68,51 EUR
Graduated prices

Shrink tubings are mainly being used to protect cables underground. They protect from moisture getting in.

We also have shrink tubings for special purposes in our product range and can deliver any amount you require. Whether you buy by the meter on a coil, whether you need black, colored or transparent. We have the solution for almost any purpose.

We hope you enjoy browsing our product category and are always happy to answer all the questions you might have. If you can't find what you are looking for, we gladly try to get it for you.

1 2 4 6 7 8 9 10 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 .. 36
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
To the shopping cart Continue shopping