Buy Shrink Tubing

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2121734

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2135523

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2121735

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2121736

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 2121737

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 871625

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1102692

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 838847

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838849

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 2145457

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 680636

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 680637

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Lieske Part No.: 2145458

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838850

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1062555

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 680660

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 838851

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1102694

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838855

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838856

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838858

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1062556

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838794

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 838795

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 ST.
Lieske Part No.: 838798

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 2135524

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 680661

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 838799

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 680665

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 2145459

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 838800

Due to the longer design of the copper sleeve, which allows the conductor to be pressed twice, these connectors are also suitable for repairing damaged solid conductors. Nominal cross section 1.5..2.5 mm², blue. Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 1086966

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 1.5, after: 0.7, color: black, wall thickness: 0.36 mm, length: 200 m, pack: 1 roll
Lieske Part No.: 673152

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 2.5, after: 1.0, color: black, wall thickness: 0.45 mm, length: 200 m, pack: 1 roll
Lieske Part No.: 673153

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 3.5, after: 1.5, color: black, wall thickness: 0.45 mm, length: 200 m, pack: 1 roll
Lieske Part No.: 673154

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 5.0, after: 2.3, color: black, wall thickness: 0.56 mm, length: 100 m, pack: 1 roll
Lieske Part No.: 673155

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 6.5, after: 3.0, color: black, wall thickness: 0.56 mm, length: 100 m, pack: 1 roll
Lieske Part No.: 673158

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 9.5, after: 4.5, color: black, wall thickness: 0.56 mm, length: 100 m, pack: 1 roll
Lieske Part No.: 673159

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 12.5, after: 6.0, color: black, wall thickness: 0.56 mm, length: 100 m, pack: 1 roll
Lieske Part No.: 1955613

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 19.0, after: 9.0, color: black, wall thickness: 0.70 mm, length: 100 m, pack: 1 roll
Lieske Part No.: 673160

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 26.0, after: 12.5, color: black, wall thickness: 0.90 mm, length: 50 m, pack: 1 roll
Lieske Part No.: 673161

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 9.5, after: 4.5, color: black, wall thickness: 0.56 mm, length: 1 m, pack: 1 piece
Lieske Part No.: 1927262

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 12.5, after: 6.0, color: black, wall thickness: 0.56 mm, length: 1 m, pack: 1 piece
Lieske Part No.: 1927263

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 31.5, after: 15.0, color: black, wall thickness: 1.00 mm, length: 5 m, pack: 1 piece
Lieske Part No.: 673163

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 50.0, after: 25.0, color: black, wall thickness: 1.00 mm, length: 5 m, pack: 1 piece
Lieske Part No.: 673167

Polyolefin heat shrink tubing, thin-walled 2:1, black, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 80.0, after: 41.0, color: black, wall thickness: 1.46 mm, length: 5 m, pack: 1 piece
Lieske Part No.: 673174

Polyolefin heat shrink tubing, thin-walled 2:1, colored, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 50.0, after: 25.0, color: green/yellow, wall thickness: 1.00 mm, length: 5 m, pack: 1 piece
Lieske Part No.: 673175

Polyolefin heat shrink tubing, thin-walled 2:1, colored, halogen-free and flexible, flame-retardant (VW-1/Ul224). Technical data: Longitudinal shrinkage: < 5%, continuous temperature: -55 to 125°C, shrink temperature: 125°C, dielectric strength: 15 kV/mm (IEC243), volume resistance: 1014 Ohm x cm (IEC93), tensile strength: 10.4 MPa (ASTM D2671) elongation at break: 200% (ASTM D2671) Ø- in mm, before: 9.5, after: 4.5, color: blue, wall thickness: 0.56 mm, length: 6.50 m, pack: 1 box
Lieske Part No.: 673177

Shrink tubing set 'BLACK', in a sturdy assortment box. The different sizes can also be ordered individually or for refilling in a polybag (100 pieces per bag). Contents: Box, 130 pieces, Ø- before: 1.5 mm, after: 0.7 mm, colour: black, wall thickness: 0.36 mm, length: 35.00, number of pieces/contents: 30, refill pack: 100 pieces (18 1681), Ø- before: 2.5 mm, after: 1.0 mm, colour: black, wall thickness: 0.45 mm, length: 35.00, number of pieces/contents: 25, refill pack: 100 pieces (18 1682), Ø- before: 3.5 mm, after: 1.5 mm, colour: black, wall thickness: 0.45 mm, length: 35.00, number of pieces/contents: 20, refill pack: 100 pieces (18 1683), Ø- before: 5.0 mm, after: 2.3 mm, colour: black, wall thickness: 0.56 mm, length: 35.00 mm, number of pieces/contents: 20, refill pack: 100 pieces (18 1684), Ø- before: 6.5 mm, after: 3.0 mm, colour: black, wall thickness: 0.56 mm, length: 70.00 mm, number of pieces/contents: 15, refill pack: 100 pieces (18 1685), Ø- before: 9.5 mm, after: 4.5 mm, colour: black, wall thickness: 0.56 mm, length: 70.00 mm, number of pieces/contents: 10, refill pack: 100 pieces (18 1686), Ø- before: 112.5 mm, after: 6.0 mm, colour: black, wall thickness: 0.56 mm, length: 70.00, Quantity/Contents: 10, Refill pack: 100 pieces (18 1687)
Lieske Part No.: 1894966

Shrink tubing set 'COLOUR', in a sturdy assortment box, 110 pieces. The different sizes can also be ordered individually or for refilling in a polybag (100 pieces per bag). Box contents: Ø- before: 3.5 mm, Ø- after: 1.5 mm, colour: green/yellow, wall thickness: 0.45 mm, length: 35.00 mm, number of pieces/contents: 20, refill pack: 100 pieces (18 1691), Ø- before: 5.0 mm, Ø- after: 2.3 mm, colour: red, wall thickness: 0.56 mm, length: 35.00 mm, number of pieces/contents: 10, refill pack: 100 pieces (18 1692), Ø 5.0 mm, Ø- after: 2.3 mm, colour: blue, wall thickness: 0.56 mm, length: 35.00 mm, number of pieces/contents: 10, refill pack: 100 pieces (18 1693), Ø-before: 5.0 mm, Ø- after: 2.3 mm, colour: green/yellow, wall thickness: 0.56 mm, length: 35.00 mm, number of pieces/contents: 10, refill pack: 100 pieces, Ø- before: 9.5 mm, Ø- after: 4.5 mm, colour: red, wall thickness: 0.56 mm, length: 70.00 mm, number of pieces/contents: 10, refill pack: 100 pieces (18 1695), Ø- before: 9.5 mm, Ø- after: 4.5 mm, colour: blue, wall thickness: 0.56 mm, length: 70.00 mm, number of pieces/contents: 10, refill pack: 100 pieces (18 1696), Ø- before: 9.5 mm, Ø- after: 4.5 mm, Color: green/yellow, wall thickness: 0.56 mm, length: 70.00 mm, number of pieces/contents: 20, refill pack: 100 pieces (18 1697), Ø- before: 12.5 mm, Ø- after: 6.0 mm, color: green/yellow, wall thickness: 0.56 mm, length: 70.00 mm, number of pieces/contents: 20, refill pack: 100 pieces (18 1698)
Lieske Part No.: 1894967