Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german language Industry-Electronics in English

Buy Shrink Tubing

Shrink tubings are made of synthetic material and become very tight when exposed to heat. They isolate and protect from mechanical and electrical damage. A shrink tubing's diameter reaches from 1 to 1100 mm. The change in size when shrinking varies strongly depending on the material of the hose's synthetics. The shrinking proportion differs from 2:1 to 6:1. When it comes to certain seals, it can also be 10:1.

A hot glue on the inside is responsible for a good sealing. For best results, many manufacturers recommend a ratio of 4:5. A distinction of shrink tubings is made regarding their diameter, wall thickness and shrinking ratio.

Manufacturer no.DescriptionPriceAnzahl Bestellen
Cellpack 143563
Cellpack SEH4 95-36 - CELL Spreader SEH4/95 36 4x120 300mmq
Sealing 4-finger distribution cap for plastic, rubber and paper insulated cables.
Sales unit: 5 pieces
Lieske Part No.: 962131
203,94 EUR
Graduated prices
Cellpack 143592
Cellpack SRMAHV 28-10/1000 - CELL Schrumpfmanschett SRMAHV28 10/1000 scope max 28 min 10
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Sales unit: 30 pieces
Lieske Part No.: 751572
2.741,90 EUR
Graduated prices
Cellpack 143605
Cellpack SRMAHV 28-10/750 -
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 377955
56,39 EUR
Graduated prices
Cellpack 143627
Cellpack SRMAHV 43-12/1500 - SRMAHV 43 12 / 1500 Warmschrumpf cuff 43 12mm 1500mm 143627
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 930996
147,67 EUR
Graduated prices
Cellpack 143628
Cellpack SRMAHV 72-18/1000 - CELL Schrumpfmanschett scope max 72 min 18
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 132650
121,10 EUR
Graduated prices
Cellpack 143629
Cellpack SRMAHV 72-18/2000 - CELL heat shrink collar 72 18mm 1000mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 944223
256,73 EUR
Graduated prices
Cellpack 143630
Cellpack SRMAHV 72-18/250 - CELL Heat li 250mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Sales unit: 150 pieces
Lieske Part No.: 710068
4.312,44 EUR
Graduated prices
Cellpack 143646
Cellpack SRMAHV 72-18/1500 - CELL heat shrink sleeve 72 18mm 1500mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 852811
180,00 EUR
Graduated prices
Cellpack 143647
Cellpack SRMAHV 93-26/1000 - Cell Pack heat shrink sleeve 1000mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 737009
127,75 EUR
Graduated prices
Cellpack 143648
Cellpack SRMAHV 93-26/2000 - Cell Pack SRMAHV 93 26 / 2000 heat shrink sleeve 1000mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 557415
370,46 EUR
Graduated prices
Cellpack 143649
Cellpack SRMAHV 93-26/250 - Cell Pack Shrink Boots black 43/26mm = 250mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Sales unit: 20 pieces
Lieske Part No.: 514949
586,48 EUR
Graduated prices
Cellpack 143654
Cellpack SRMAHV 93-26/750 - Cell Pack Shrink Boots black 93/26 = 750mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Sales unit: 50 pieces
Lieske Part No.: 204687
4.304,52 EUR
Graduated prices
Cellpack 143659
Cellpack SRMAHV 115-30/1000 - Cell Pack heat shrink sleeve 1000mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 979636
146,10 EUR
Graduated prices
Cellpack 143663
Cellpack SRMAHV 115-30/500 - CELL Heat Mans 500mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 718439
113,83 EUR
Graduated prices
Cellpack 143669
Cellpack SRMAHV 115-30/1500 (143669)
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 699125
414,49 EUR
Graduated prices
Cellpack 143670
Cellpack SRMAHV 125-32/1000 - Cell Pack heat shrink sleeve 1000mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 914070
158,90 EUR
Graduated prices
Cellpack 143672
Cellpack SRMAHV 125-32/500 - CELL shrink sleeves SRMAHV125 32/50 scope max 125 Min 32
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 891051
129,47 EUR
Graduated prices
Cellpack 143673
Cellpack SRMAHV 125-32/750 - CELL shrink sleeves SRMAHV125 32/75 scope max 125 Min 32
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 508250
459,44 EUR
Graduated prices
Cellpack 143679
Cellpack SRMAHV 125-32/1500 - Cell Pack heat shrink sleeve 1500mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 152716
254,89 EUR
Graduated prices
Cellpack 143680
Cellpack SRMAHV 150-50/1000 - CELL hot cuff SRMAHV150 50/1000MM 150 50mm 1000mm
For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 298709
258,69 EUR
Graduated prices
Cellpack 143759
Cellpack 143759 - SR2 12 3 / sw shrink hose avg 12 3mm 30m
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 806247
370,06 EUR
Graduated prices
Cellpack 143764
Cellpack SR2 22-6/m sw (143764)
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 1315398
453,82 EUR
Graduated prices
Cellpack 143766
Cellpack SR2 34-7/m sw - CELL SR2 34 7 / sw shrink tubing Mean 34 7mm/30m sw
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 860855
652,81 EUR
Graduated prices
Cellpack 143770
Cellpack SR2 40-12/m sw (143770)
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 1578751
706,86 EUR
Graduated prices
Cellpack 143803
Cellpack SR2 56-16/m sw - CELL SR2 56 16 / sw shrink tubing sw
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 575086
833,98 EUR
Graduated prices
Cellpack 143806
Cellpack SR2 140-42/1000 sw - SR2 140 42 / 1000 sw shrink hose avg 140 42mm 1m 143806
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 310049
89,14 EUR
Graduated prices
Cellpack 143811
Cellpack SR2 160-50/1000 sw - CELL SR2 160 50/1000 black shrink tubing 1000mm pieces
The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 718672
96,78 EUR
Graduated prices
Cellpack 144013
Cellpack SRH2 140-42/1000 sw - CELL Heat shrink adhesive
The heat shrink tubing type SRH2 is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 514984
115,00 EUR
Graduated prices
Cellpack 144018
Cellpack SRH2 160-50/1000 sw - CELL SRH2 160 50/1000 Heat shrink blk black 1000mm pieces
The heat shrink tubing type SRH2 is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 562933
137,17 EUR
Graduated prices
Cellpack 144128Cellpack SR1F/12.7-6.4/grau/100m (144128)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 100 meters
Lieske Part No.: 490879
540,54 EUR
Graduated prices
Cellpack 144130
Cellpack SR1F 19.1-9.5/m or (144130)
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1316304
6,87 EUR
Graduated prices
Cellpack 144133Cellpack SR1F/19.1-9.5/grau/50m (144133)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 490882
343,53 EUR
Graduated prices
Cellpack 144134Cellpack SR1F/19.1-9.5/braun/50m (144134)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 490881
343,53 EUR
Graduated prices
Cellpack 144137
Cellpack SR1F 25.4-12.7/m gr - SR1F 25 4 12 7 / gr shrink hose dünnw 25 4 12 7mm 50m 144 137
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962944
553,41 EUR
Graduated prices
Cellpack 144138
Cellpack SR1F 25.4-12.7/m br - SR1F 25 4 12 7 / br shrink hose dünnw 25 4 12 7mm 50m 144 138
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962854
553,41 EUR
Graduated prices
Cellpack 144142Cellpack SR1F/38.1-19.1/grau/50m (144142)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 490888
896,94 EUR
Graduated prices
Cellpack 144143Cellpack SR1F/38.1-19.1/braun/50m (144143)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 490887
896,94 EUR
Graduated prices
Cellpack 144146Cellpack SR1F/51-25.4/grau/50m (144146)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 490892
1.224,63 EUR
Graduated prices
Cellpack 144148Cellpack SR1F/76-38/blau/25m (144148)
Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 490848
1.046,43 EUR
Graduated prices
Cellpack 144176
Cellpack SR1F 2.4-1.2/m bl - SR1F 2 4 1 2 / bl shrink hose dünnw 2 4 1 2mm 300m 144176
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 962348
813,78 EUR
Graduated prices
Cellpack 144200
Cellpack SR1F 4.8-2.4/m ws - SR1F 4 8 2 4 / ws shrink hose dünnw 4 8 2 4mm 300 144 200
The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 960988
1.081,08 EUR
Graduated prices
Cellpack 144209
Cellpack SR1F3/9-3/gg - SR1F3 / 9 3 / gg shrink tubing thin wall 9 3mm 150 144 209
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 150 meters
Lieske Part No.: 976778
1.167,21 EUR
Graduated prices
Cellpack 144216
Cellpack SR1F3 18-6/m gg - SR1F3 18 6 / gg shrink hose dünnw 18 6mm 50m 144 216
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 971605
582,12 EUR
Graduated prices
Cellpack 144220
Cellpack SR1F3 24-8/m gg - SR1F3 24 8 / gg shrink hose dünnw 24 8mm 50m 144 220
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 971640
926,64 EUR
Graduated prices
Cellpack 144362
Cellpack SR1F3 1.5-0.5/1000 s (144362)
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 498438
38,81 EUR
Graduated prices
Cellpack 144363
Cellpack SR1F31.5-0.5/1000 tr - CELL SR1F31 5 0 5/1000 duennwand shrink tubing
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 100282
41,78 EUR
Graduated prices
Cellpack 144368
Cellpack SR1F3 3-1/1000 sw - CELL SR1F3 3 1/1000 black shrink tubing 3 1mm / 1m black
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 551327
44,95 EUR
Graduated prices
Cellpack 144369
Cellpack SR1F3 3-1/1000 tr - CELL shrink tubing 3 1mm / 1m transp
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 163988
47,92 EUR
Graduated prices
Cellpack 144378
Cellpack SR1F3 6-2/1000 sw -
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 439043
54,05 EUR
Graduated prices
Cellpack 144385
Cellpack SR1F3 9-3/1000 sw - CELL SR1F3 9 3/1000 black shrink tubing 9 3mm / 1m black
The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 534678
65,93 EUR
Graduated prices

Shrink tubings are mainly being used to protect cables underground. They protect from moisture getting in.

We also have shrink tubings for special purposes in our product range and can deliver any amount you require. Whether you buy by the meter on a coil, whether you need black, colored or transparent. We have the solution for almost any purpose.

We hope you enjoy browsing our product category and are always happy to answer all the questions you might have. If you can't find what you are looking for, we gladly try to get it for you.

1 2 3 4 5 7 9 10 11 12 14 16 18 23 28 33 36
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
To the shopping cart Continue shopping