Buy Shrink Tubing

Verkaufseinheit: 1 ST.
Lieske Part No.: 505200

Isolierende Endkappe. Warmschrumpf. 0,6/1kV. Für Kabeldurchmesser 16,5-36 mm. Universell einsetzbar zum Abschluss von Kunststoffkabeln (z. B. N(A)YY, N(A)2XY, N(A)YCW(W)Y). Zum Isolation von Kabel- und Leitungsenden sowie Rohren gegen Feuchtigkeit bei Transport und Lagerung. Wärmeschrumpfende, vernetzte Polyolefin-Kappe, innenseitig mit Heißschmelzkleber beschichtet. Raychem. Anwendungsbereich: Innenraum, Freiluft, Erdreich, Wasser, Installationskanäle und -rohre. Verkaufseinheit: 1 ST.
Lieske Part No.: 834921

Isolierende Endkappe. Warmschrumpf. 0,6/1kV. Für Kabeldurchmesser 27-50 mm. Universell einsetzbar zum Abschluss von Kunststoffkabeln (z. B. N(A)YY, N(A)2XY, N(A)YCW(W)Y). Zum Isolation von Kabel- und Leitungsenden sowie Rohren gegen Feuchtigkeit bei Transport und Lagerung. Wärmeschrumpfende, vernetzte Polyolefin-Kappe, innenseitig mit Heißschmelzkleber beschichtet. Raychem. Anwendungsbereich: Innenraum, Freiluft, Erdreich, Wasser, Installationskanäle und -rohre. Verkaufseinheit: 1 ST.
Lieske Part No.: 834922

Vierfinger Aufteilkappe Warmschrumpf bis 0,6/1kV. Raychem. Universell einsetzbar zum Abschluss von Kunststoffkabeln (z. B. N(A)YY, N(A)2XY). Wärmeschrumpfende Aufteilkappe aus vernetztem Polyolefin, innenseitig mit Heißschmelzkleber beschichtet. Zur Abdichtung von Kabelzwickeln, papierisolierter Kabel und Metallmäntel, kunststoff- oder gummiisolierter Kabel und Leitungen. Verkaufseinheit: 1 ST.
Lieske Part No.: 512999

Verkaufseinheit: 1 ST.
Lieske Part No.: 505201

Vierfinger Aufteilkappe Warmschrumpf bis 0,6/1kV. Raychem. Universell einsetzbar zum Abschluss von Kunststoffkabeln (z. B. N(A)YY, N(A)2XY). Wärmeschrumpfende Aufteilkappe aus vernetztem Polyolefin, innenseitig mit Heißschmelzkleber beschichtet. Zur Abdichtung von Kabelzwickeln, papierisolierter Kabel und Metallmäntel, kunststoff- oder gummiisolierter Kabel und Leitungen. Verkaufseinheit: 1 ST.
Lieske Part No.: 512998

Verkaufseinheit: 1 ST.
Lieske Part No.: 505202

Innenraum-Endverschluss für geschirmte Einleiter-Kunststoffkabel. Uo/U (Um) 12/20 (24) kV. Länge: 335 mm. Leiterquerschnitt: 25-95 mm². Incl. Schraubkabelschuh, Bohrung Durchmesser: 13 mm. (1 Satz = 3 Stück). Raychem. Einsatz an kunststoffisolierten, geschirmten Einleiter-Kabeln mit PVC und PE-Außenmantel nach VDE 0271 und VDE 0273, wie z. B. N(A)YSY, N(A)2YSY, N(A)2XSY, N(A)2XS(F)2Y oder TGL 200-1750/08, wie z. B. N(A)2YHCaY, N(A)2YHCuY, N(A)2YHCa2Y, N(A)2YHCu2Y. Geprüft nach CENELEC HD 629 S1: 1986 (VDE 0278 Teil 629-1) geprüft und erfüllt somit die Anforderungen aller wesentlichen nationalen und internationalen Vorschriften, wie z. B. VDE, BS, IEC. Verkaufseinheit: 1 ST.
Lieske Part No.: 513040

Freiluft-Endverschluss für geschirmte Einleiter-Kunststoffkabel. Uo/U (Um) 12/20 (24) kV. Länge: 480 mm. Leiterquerschnitt: 95-240 mm². Incl. Schraubkabelschuh, Bohrung Durchmesser: 13 mm. 3 Schirme. (1 Satz = 3 Stück). Raychem. Für Freiluftanwendungen sind längsdichte Kabelschuhe zu verwenden. Einsatz an kunststoffisolierten, geschirmten Einleiter-Kabeln mit PVC und PE-Außenmantel nach VDE 0271 und VDE 0273, wie z. B. N(A)YSY, N(A)2YSY, N(A)2XSY, N(A)2XS(F)2Y oder TGL 200-1750/08, wie z. B. N(A)2YHCaY, N(A)2YHCuY, N(A)2YHCa2Y, N(A)2YHCu2Y. Geprüft nach CENELEC HD 629 S1: 1986 (VDE 0278 Teil 629-1) geprüft und erfüllt somit die Anforderungen aller wesentlichen nationalen und internationalen Vorschriften, wie z. B. VDE, BS, IEC. Verkaufseinheit: 1 ST.
Lieske Part No.: 513052

Warmschrumpfschlauch bis 0,6/1kV zur elektrischen Isolation, zum Abdichten und als Korrosionsschutz von Bauteilen. Elektrische Durchschlagsfestigkeit: 10 kV/ mm. Großer Anwendungsbereich für Kabel oder Leitungen ohne Bewehrung mit Isolierungen aus PVC, PE, VPE und EPR. Raychem. Anwendungsbereich: Innenraum, Freiluft, Erdreich, Wasser, Installationskanäle und -rohre. Verkaufseinheit: 1 ST.
Lieske Part No.: 512837

Warmschrumpfschlauch bis 0,6/1kV zur elektrischen Isolation, zum Abdichten und als Korrosionsschutz von Bauteilen. Elektrische Durchschlagsfestigkeit: 10 kV/ mm. Großer Anwendungsbereich für Kabel oder Leitungen ohne Bewehrung mit Isolierungen aus PVC, PE, VPE und EPR. Raychem. Anwendungsbereich: Innenraum, Freiluft, Erdreich, Wasser, Installationskanäle und -rohre. Verkaufseinheit: 1 ST.
Lieske Part No.: 512834

Warmschrumpfschlauch bis 0,6/1kV zur elektrischen Isolation, zum Abdichten und als Korrosionsschutz von Bauteilen. Elektrische Durchschlagsfestigkeit: 10 kV/ mm. Großer Anwendungsbereich für Kabel oder Leitungen ohne Bewehrung mit Isolierungen aus PVC, PE, VPE und EPR. Raychem. Anwendungsbereich: Innenraum, Freiluft, Erdreich, Wasser, Installationskanäle und -rohre. Verkaufseinheit: 1 ST.
Lieske Part No.: 2144450

Warmschrumpfschlauch bis 0,6/1kV zur elektrischen Isolation, zum Abdichten und als Korrosionsschutz von Bauteilen. Elektrische Durchschlagsfestigkeit: 10 kV/ mm. Großer Anwendungsbereich für Kabel oder Leitungen ohne Bewehrung mit Isolierungen aus PVC, PE, VPE und EPR. Raychem. Anwendungsbereich: Innenraum, Freiluft, Erdreich, Wasser, Installationskanäle und -rohre. Verkaufseinheit: 1 ST.
Lieske Part No.: 512833

Verkaufseinheit: 1 ST.
Lieske Part No.: 505203

Vierfinger Aufteilkappe Warmschrumpf bis 0,6/1kV. Raychem. Universell einsetzbar zum Abschluss von Kunststoffkabeln (z. B. N(A)YY, N(A)2XY). Wärmeschrumpfende Aufteilkappe aus vernetztem Polyolefin, innenseitig mit Heißschmelzkleber beschichtet. Zur Abdichtung von Kabelzwickeln, papierisolierter Kabel und Metallmäntel, kunststoff- oder gummiisolierter Kabel und Leitungen. Verkaufseinheit: 1 ST.
Lieske Part No.: 513001

Geschirmter Winkelstecker mit Schraubkabelschuh für Einleiter-Kunststoffkabel ohne Bewehrung, Uo/U (Um) 6/10 (12) kV, Leiterquerschnitt: 95 mm², Uo/U (Um) 12/20 (24) kV, Leiterquerschnitt: 25-95 mm². Durchmesser über Isolation: 17,9-25,0 mm. (1 Satz = 3 Stk.). Integrierte Feldsteuerung. mit Schirmdraht-Erdungszubehör. Verkaufseinheit: 1 ST.
Lieske Part No.: 700102

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022225

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022226

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022227

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022228

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022229

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022230

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022231

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022928

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022929

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022930

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022931

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022932

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022933

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022934

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022935

Shelf for shrink tubing boxes
The shrink tubing shelf holds up to 6 RED® shrink tubing mini boxes and brings order to the workshop or assembly & service vehicle. The scissors supplied and attached by a chain allow you to cut off the required section of shrink tubing at any time.
Dimensions: 18.3 x 31.6 x 26.2 mm
Color: red
This package
contains the following shrink tubing mini boxes.
DEHA No. 5116532, WSB 3:1 Box 3.0-1.0
DEHA No. 5116533, WSB 3:1 Box 6.0-2.0
DEHA No. 5116534, WSB 3:1 Box 9.0-3.0 DEHA No.
5116535, WSB 3:1 Box 12.0-4.0
DEHA No. 5116536, WSB 3:1 Box 18.0-6.0
DEHA No. 5116537, WSB 3:1 Box 24.0-8.0
Lieske Part No.: 2072243

Use the 3M Scotchlok UR-2 connector with its special insulation displacement contact to create a reliable electrical connection to wires in communication cables. The conductor is inserted into the U-contact connector, creating a spring-loaded connection. This removes the insulation and presses all conductors together with a firm, elastic pressure in one motion. The conductor insulation does not need to be removed. 3M Scotchlok connectors are factory filled with sealant that protects against corrosion and moisture. They are also available in a dry version for indoor use. Various sizes and wire combinations are available to meet all requirements. Solid wire size 0.4 mm to 0.9 mm with a maximum insulation diameter of 2.08 mm.
Sales unit: 100 pieces
Lieske Part No.: 695350

The 3M Scotchlok UR2-D-JA
R500, 0.4mm - 0.9mm single wire connector (dry), 500/can, can be used to connect two or three conductors with different conductor cross-sections. It is ideal for paper-insulated conductors. The UR2-D is an unfilled polypropylene connector for two copper wires with a diameter of 0.4 mm to 0.9 mm. Listed in the RUS list.
Lieske Part No.: 440492

3MT Cold Shrink Insulation Tubing 8420 and 8430 are EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
3MT Cold Shrink Insulation Tubing Series 8420 and 8430 are especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding for communication lines and other non-electrical applications (including cable jacket repairs). The operating temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with, for example, Scotch® Super 33+T Vinyl Insulation Tape or Scotch® Self-Vulcanizing Silicone Rubber Tape 70.
Sales unit: 10 pieces
Lieske Part No.: 218207

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 876880

Heat-shrink compression connectors for electrically perfect connections and effective protection against moisture.
The 3MT ScotchlokT heat-shrink compression connectors can be used in installation technology wherever you want to connect single-wire conductors using compression technology. After heat-shrinking, the connectors also provide insulation that protects against moisture. This makes them particularly suitable for use in non-air-conditioned rooms or outdoors. The seamless connectors are made of tinned copper and are surrounded by an insulating layer of polyolefin with an inner coating of hot-melt adhesive. They can withstand a maximum voltage of 600 volts and their maximum operating temperature is 105 °C. The compression connectors are available in red, blue and yellow with a maximum conductor cross-section between 1.0 and 6.0 square millimeters. The maximum corresponds to the conductor cross-section. The ScotchlokT heat-shrink compression connectors are UL and CSA listed for use on flexible cables up to 600V.
Sales unit: 125 pieces
Lieske Part No.: 118268

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 846896

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 804885

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 496222

The cold shrink insulation tubes 8420 and 8430 are EPDM tubes that represent a unique cold shrink connection system. The products are supplied pre-stretched on a removable support coil, which enables efficient and easy installation. When the support coil is pulled out after positioning the tube, the tube shrinks and forms a watertight seal. The active deformation of the specially formulated material ensures permanent sealing and insulation from the environment.
Cold shrink tubes are used to insulate all plastic or rubber insulated cables. The products are supplied pre-stretched on a removable support coil, which enables efficient and easy installation. After assembly, the cold shrink tube provides reliable protection against moisture thanks to its constant radial contact pressure. Its good thermal stability and resistance to acids, alkalis, ozone and UV radiation guarantee long-lasting functionality.
Sales unit: 10 pieces
Lieske Part No.: 205992

Effective cable protection with the simplest application - the coaxial sealing kit does not require any tools for installation.
The 3MT cold shrink coaxial cable sealing kit 98-KC reliably protects coaxial connectors and antenna entries indoors and outdoors from moisture. It is especially suitable for applications with mobile phone antennas and base stations. The cold shrink kit also ensures flexible kink protection. Its simple and quick installation by pulling out the support spiral enables reliable installation even without special tools, such as shrink burners. After installation, the cold shrink tubing provides reliable protection against moisture thanks to its constant radial contact pressure. Its very good thermal stability and resistance to acids, alkalis, ozone and UV radiation guarantee long-lasting functionality.
Sales unit: 10 pieces
Lieske Part No.: 911975

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 689075

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 150533

3M QTII Cold Shrink Outdoor Cable Termination, 1 Conductor
The 3MT Cold Shrink Cable Termination Kit, 5620K Series, is designed for terminating medium voltage solid dielectric insulated cables in indoor applications. When the core of the cable termination is unwound, it shrinks over the cable, ensuring a perfect, leak-proof fit. The cable termination's tracking-resistant silicone rubber insulation ensures long service life. Approved for weatherproof applications.
Lieske Part No.: 306467

3M QTII Cold Shrink Outdoor Cable Termination, 1 Conductor
The 3MT Cold Shrink Cable Termination Kit, 5620K Series, is designed for terminating medium voltage solid dielectric insulated cables in indoor applications. When the core of the cable termination is unwound, it shrinks over the cable, ensuring a perfect, leak-proof fit. The cable termination's tracking-resistant silicone rubber insulation ensures long service life. Approved for weatherproof applications.
Lieske Part No.: 185673

Casting resin 40 is a two-component polyurethane resin for general applications that hardens at room temperature. It is supplied in a two-component plastic bag in the correct stoichiometric ratio by tearing open a separating seam.
Casting resin 40 is suitable for electrical insulation and mechanical protection of electrical connections for use up to 1 kV. The water-repellent polyurethane resin meets the requirements of CENELEC HD631.1 S2 and is compliant with EU Directive 2011/65/EC (RoHS) and EU Directive 1907/2007/EC (REACH). It guarantees the highest level of electrical insulation for professional use. Fast and clean application thanks to the new 3M patented integrated casting nozzle in the resin bag. Bag opener is included.
Sales unit: 10 pieces
Lieske Part No.: 413305

The premium resin cable joint kits contain cable resin 40, a high-quality, two-component polyurethane compound developed for general electrical insulation, moisture sealing and mechanical protection.
The 92-NBA series cast resin joint kit is designed for one to five-core, unshielded low-voltage plastic cables. It ensures electrical insulation and mechanical protection of cable joints. The SVHC-free premium joint kit, tested according to EN 50393, can be used indoors and outdoors, underground or underwater. The transparent, one-piece casting shell can be folded up in no time at all and closes by automatically snapping into place. Pre-formed, perforated foam seals are also used. This eliminates the previously time-consuming use of saws and adhesive tape for a tight seal. A GMG system (closed mixing and pouring) is used when casting the cast resin 40 included in the scope of delivery. This means that contact with the casting resin during processing is practically impossible. The transparent mixing bag guarantees visual control of the mixing process. After use, the mixing bag with the remaining hardened casting resin can be disposed of as normal household waste. Disposal as hazardous waste is not necessary.
Sales unit: 10 pieces
Lieske Part No.: 555341

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 25 pieces
Lieske Part No.: 882443

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 15 pieces
Lieske Part No.: 543870