Chauvin Arnoux P01295455Z Test leads with test probe, 4 mm straight plug, 1.5 m, 15 A, CAT IV, 1000 V, PVC, red + black content_copy

Test leads with test probes from Chauvin Arnoux are designed for use in electrical engineering and measurement technology. They consist of PVC-insulated cables and are equipped with straight connectors with a diameter of 4 mm, which are insulated. The leads are available in red and black and are used for safe connection of measuring instruments to electrical installations. With a length of 1.5 m and a current rating of 15 A, they are suitable for typical measurement tasks in the field of voltage measurement. The leads comply with safety categories 600 V CAT IV and 1000 V CAT III, enabling their use in high-voltage environments and for measurements on main distribution boards. The cables are intended as replacement or supplementary accessories for measuring instruments and are often supplied as standard equipment with devices.

Test leads with test probes provide a safe and reliable connection between measuring instrument and measurement point. The test probes enable precise contact with connection points, while the insulated connectors ensure protection against contact with conductive parts. The PVC insulation ensures high mechanical strength and resistance to environmental influences, extending the service life of the leads. The colour coding (red/black) supports clear identification of polarity and reduces error sources during measurement.

Technology explained simply: The leads are designed for use in electrical installations where safe and precise measurement is required. The safety categories CAT IV and CAT III refer to the maximum permissible voltage and the environmental conditions under which the leads may be used. CAT IV applies to measurements on main distribution boards, CAT III to measurements on distributors and devices. The specification 600 V CAT IV means the leads are suitable for measurements up to 600 V in CAT IV environments, while 1000 V CAT III allows use up to 1000 V in CAT III environments. The current rating of 15 A is sufficient for most measurement tasks in electrical engineering.

Compatibility and accessories: The test leads are compatible with measuring instruments that have 4-mm socket connectors. They can be used as replacements for worn or damaged leads and are universally applicable in electrical installation, service, and maintenance. The cables are not specifically designed for a particular device, but are intended as universal accessories for a wide range of measuring instruments.

Installation and mounting: The leads are simply plugged into the socket connectors of the measuring instrument and connected to the measurement points using the test probes. The insulated connectors and PVC insulation ensure safe handling, even at high voltages. The length of 1.5 m provides sufficient freedom of movement during work without the leads being excessively long.

Operational advantages: The combination of robust PVC material, insulated connectors, and colour coding ensures high safety and reliability. The leads are easy to handle and enable quick and safe measurements. The use of test probes ensures a safe and precise contact, increasing measurement accuracy. The safety categories CAT IV and CAT III extend the range of applications and allow use in demanding environments.

The test leads are supplied as a set of two cables (red and black). Information on usage and safety is included in the technical specifications and safety standards applicable to the respective application.

The leads are suitable for use in electrical engineering, for maintenance and servicing of electrical installations, and in service operations. They support the safe and precise execution of measurements and are an important part of the equipment for electrical specialists and technicians.

The safety category specifications CAT IV/600 V and CAT III/1000 V refer to the maximum permissible voltage and the environmental conditions under which the leads may be used. The 15 A rating refers to the maximum current load capacity of the leads. The length of 1.5 m is sufficient for most applications. The PVC insulation provides high protection against mechanical damage and environmental influences. The colour coding (red/black) facilitates clear identification of polarity.

The leads are not specifically designed for a particular measuring instrument, but are intended as universal accessories for devices with 4-mm socket connectors. Use involves simply plugging into the socket connectors of the device and connecting to the measurement points using the test probes. The insulated connectors and PVC insulation ensure safe handling, even at high voltages. The length of 1.5 m provides sufficient freedom of movement during work without the leads being excessively long.

The leads are supplied as a set of two cables (red and black). Information on usage and safety is included in the technical specifications and safety standards applicable to the respective application.

The leads are suitable for use in electrical engineering, for maintenance and servicing of electrical installations, and in service operations. They support the safe and precise execution of measurements and are an important part of the equipment for electrical specialists and technicians.