Installation Material from OBO Bettermann

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 124035

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 941946

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426022

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 800546

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426325

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561638

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 982421

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561688

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561693

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426285

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 318781

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 146155

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 561696

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 309211

Sprint screw T-hardened 4759 steel, galvanized and gelbchro formatted and Hostaflon, countersunk head with T-bit (hexagon round). The Gr. Ø 3 mm T
, Ø 3.5 mm T
5, 4 and 4.5 mm Ø T2, T25 Ø 5 mm Ø 7.5 mm Length: 2 mm Type: 4759T 4 x2 Quantity: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 877694

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426292

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 317680

Sprint screw T-hardened 4759 steel, galvanized and gelbchro formatted and Hostaflon, countersunk head with T-bit (hexagon round). The Gr. Ø 3 mm T
, Ø 3.5 mm T
5, 4 and 4.5 mm Ø T2, T25 Ø 5 mm Ø 7.5 mm Length: 35 mm Type: 4759T 4 x35 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 883295

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 533513

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 315349

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 632291

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 284626

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 919113

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 928675

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 181432

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 315290

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 281901

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 281906

Hardened steel, galvanized and hostaflon coated. Countersunk head with T-bit (hexalobular socket), size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 593197

Wall hooks 1101
material: steel, bare type: 1101/40 Quantity: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 215609

Wall hooks


Material: Steel, blank thickness: 3 mm Length: 5 mm Type:


/ 5 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 821779

Wall hooks 1101
Material: Steel, bright
Thickness: 3.0 mm
Length: 60 mm

Type: 1101/60
Item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 446325

Wall hooks


Material: Steel, blank thickness: 3 mm Length: 7 Type:


/ 7 item: 25 ST.
Sales unit: 250 pieces
Lieske Part No.: 931024

Hook nail unhardened 3.4x50mm
Sales unit: 250 pieces
Lieske Part No.: 559624

Hook nail unhardened 3.4x60mm
Sales unit: 250 pieces
Lieske Part No.: 877261

Hook nail unhardened 3.4x70mm
Sales unit: 250 pieces
Lieske Part No.: 800736

Wall hooks 1101
Material: Steel, bright
Thickness: 3.4 mm
Length: 80 mm

Type: 1101/80
Item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 327034

Wall hooks 1101
Material: Steel, bright
Thickness: 3.4 mm
Length: 90 mm

Type: 1101/90
Item: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 339414

Hook nail unhardened 3.4x100mm
Sales unit: 250 pieces
Lieske Part No.: 647671

Hook nail unhardened 3x50mm
Sales unit: 250 pieces
Lieske Part No.: 843085

Hook nail unhardened 3x60mm
Sales unit: 250 pieces
Lieske Part No.: 351433

Hook nail unhardened 3x70mm
Sales unit: 250 pieces
Lieske Part No.: 945758

Hook nail unhardened 3.4x50mm
Sales unit: 250 pieces
Lieske Part No.: 332201

Hook nail unhardened 3.4x60mm
Sales unit: 250 pieces
Lieske Part No.: 2013105

Hook nail unhardened 3.4x70mm
Sales unit: 250 pieces
Lieske Part No.: 2013106

Hook nail unhardened 3.4x80mm
Sales unit: 250 pieces
Lieske Part No.: 2013107

Steel, bright (St), hardened, blue tempered from square steel.
Sales unit: 100 pieces
Lieske Part No.: 768293

Steel, bright (St), hardened, blue tempered from square steel.
Sales unit: 100 pieces
Lieske Part No.: 118642

362 steel needles with bead head hardened, blue Version:
6 mm plug Ø 2 mm Ø Type: 362 /
6 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 515899

Hardened steel, blue tempered, with lens head.
Sales unit: 1000 pieces
Lieske Part No.: 945420